The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
results in an iopriority level to always be masked using the macro
IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
value for an I/O priority level when checked in ioprio_check_cap().
Before this patch, this function would return an error for some (but not
all) invalid values for a level valid range of [0..7].
Restore and improve the detection of invalid priority levels by
introducing the inline function ioprio_value() to check an ioprio class,
level and hint value before combining these fields into a single value
to be used with ioprio_set() or AIOs. If an invalid value for the class,
level or hint of an ioprio is detected, ioprio_value() returns an ioprio
using the class IOPRIO_CLASS_INVALID, indicating an invalid value and
causing ioprio_check_cap() to return -EINVAL.
Fixes: 6c913257226a ("scsi: block: Introduce ioprio hints")
Fixes: eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
block/ioprio.c | 1 +
include/uapi/linux/ioprio.h | 47 +++++++++++++++++++++++--------------
2 files changed, 31 insertions(+), 17 deletions(-)
diff --git a/block/ioprio.c b/block/ioprio.c
index f0d9e818abc5..b5a942519a79 100644
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -58,6 +58,7 @@ int ioprio_check_cap(int ioprio)
if (level)
return -EINVAL;
break;
+ case IOPRIO_CLASS_INVALID:
default:
return -EINVAL;
}
diff --git a/include/uapi/linux/ioprio.h b/include/uapi/linux/ioprio.h
index 607c7617b9d2..7310449c0178 100644
--- a/include/uapi/linux/ioprio.h
+++ b/include/uapi/linux/ioprio.h
@@ -6,15 +6,13 @@
* Gives us 8 prio classes with 13-bits of data for each class
*/
#define IOPRIO_CLASS_SHIFT 13
-#define IOPRIO_CLASS_MASK 0x07
+#define IOPRIO_NR_CLASSES 8
+#define IOPRIO_CLASS_MASK (IOPRIO_NR_CLASSES - 1)
#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1)
#define IOPRIO_PRIO_CLASS(ioprio) \
(((ioprio) >> IOPRIO_CLASS_SHIFT) & IOPRIO_CLASS_MASK)
#define IOPRIO_PRIO_DATA(ioprio) ((ioprio) & IOPRIO_PRIO_MASK)
-#define IOPRIO_PRIO_VALUE(class, data) \
- ((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \
- ((data) & IOPRIO_PRIO_MASK))
/*
* These are the io priority classes as implemented by the BFQ and mq-deadline
@@ -25,10 +23,13 @@
* served when no one else is using the disk.
*/
enum {
- IOPRIO_CLASS_NONE,
- IOPRIO_CLASS_RT,
- IOPRIO_CLASS_BE,
- IOPRIO_CLASS_IDLE,
+ IOPRIO_CLASS_NONE = 0,
+ IOPRIO_CLASS_RT = 1,
+ IOPRIO_CLASS_BE = 2,
+ IOPRIO_CLASS_IDLE = 3,
+
+ /* Special class to indicate an invalid ioprio value */
+ IOPRIO_CLASS_INVALID = 7,
};
/*
@@ -73,15 +74,6 @@ enum {
#define IOPRIO_PRIO_HINT(ioprio) \
(((ioprio) >> IOPRIO_HINT_SHIFT) & IOPRIO_HINT_MASK)
-/*
- * Alternate macro for IOPRIO_PRIO_VALUE() to define an IO priority with
- * a class, level and hint.
- */
-#define IOPRIO_PRIO_VALUE_HINT(class, level, hint) \
- ((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \
- (((hint) & IOPRIO_HINT_MASK) << IOPRIO_HINT_SHIFT) | \
- ((level) & IOPRIO_LEVEL_MASK))
-
/*
* IO hints.
*/
@@ -107,4 +99,25 @@ enum {
IOPRIO_HINT_DEV_DURATION_LIMIT_7 = 7,
};
+#define IOPRIO_BAD_VALUE(val, max) ((val) < 0 || (val) >= (max))
+
+/*
+ * Return an I/O priority value based on a class, a level and a hint.
+ */
+static __always_inline __u16 ioprio_value(int class, int level, int hint)
+{
+ if (IOPRIO_BAD_VALUE(class, IOPRIO_NR_CLASSES) ||
+ IOPRIO_BAD_VALUE(level, IOPRIO_NR_LEVELS) ||
+ IOPRIO_BAD_VALUE(hint, IOPRIO_NR_HINTS))
+ return IOPRIO_CLASS_INVALID << IOPRIO_CLASS_SHIFT;
+
+ return (class << IOPRIO_CLASS_SHIFT) |
+ (hint << IOPRIO_HINT_SHIFT) | level;
+}
+
+#define IOPRIO_PRIO_VALUE(class, level) \
+ ioprio_value(class, level, IOPRIO_HINT_NONE)
+#define IOPRIO_PRIO_VALUE_HINT(class, level, hint) \
+ ioprio_value(class, level, hint)
+
#endif /* _UAPI_LINUX_IOPRIO_H */
--
2.40.1
