On Tue, May 23, 2023 at 11:41 PM Pranav Prasad <pranavpp@xxxxxxxxxx> wrote:
>
> From: Changyuan Lyu <changyuanl@xxxxxxxxxx>
>
> This patch adds a fatal error check for the pm8001_phy_control() function.
>
> Signed-off-by: Changyuan Lyu <changyuanl@xxxxxxxxxx>
> Signed-off-by: Pranav Prasad <pranavpp@xxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxx>
> ---
> drivers/scsi/pm8001/pm8001_sas.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index e5673c774f66..b153f0966e5d 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -167,6 +167,16 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
> pm8001_ha = sas_phy->ha->lldd_ha;
> phy = &pm8001_ha->phy[phy_id];
> pm8001_ha->phy[phy_id].enable_completion = &completion;
> +
> + if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
> + /* If the controller is in fatal error state,
> + * we will not get a response from the controller
> + */
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Phy control failed due to fatal errors\n");
> + return -EFAULT;
> + }
> +
> switch (func) {
> case PHY_FUNC_SET_LINK_RATE:
> rates = funcdata;
> --
> 2.40.1.698.g37aff9b760-goog
>
