Re: [PATCH v2 6/7] qla2xxx: Wait for io return on terminate rport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Apr 28, 2023, at 12:53 AM, Nilesh Javali <njavali@xxxxxxxxxxx> wrote:
> 
> From: Quinn Tran <qutran@xxxxxxxxxxx>
> 
> System crash due to use after free.
> Current code allows terminate_rport_io to exit before making
> sure all IOs has returned. For FCP-2 device, IO's can hang
> on in HW because driver has not tear down the session in FW at
> first sign of cable pull. When dev_loss_tmo timer pops,
> terminate_rport_io is called and upper layer is about to
> free various resources. Terminate_rport_io trigger qla to do
> the final cleanup, but the cleanup might not be fast enough where it
> leave qla still holding on to the same resource.
> 
> Wait for IO's to return to upper layer before resources are freed.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
> Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
> ---
> drivers/scsi/qla2xxx/qla_attr.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
> index 70cfc94c3d43..b00222459607 100644
> --- a/drivers/scsi/qla2xxx/qla_attr.c
> +++ b/drivers/scsi/qla2xxx/qla_attr.c
> @@ -2750,6 +2750,7 @@ static void
> qla2x00_terminate_rport_io(struct fc_rport *rport)
> {
> fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
> + scsi_qla_host_t *vha;
> 
> if (!fcport)
> return;
> @@ -2759,9 +2760,12 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
> 
> if (test_bit(ABORT_ISP_ACTIVE, &fcport->vha->dpc_flags))
> return;
> + vha = fcport->vha;
> 
> if (unlikely(pci_channel_offline(fcport->vha->hw->pdev))) {
> qla2x00_abort_all_cmds(fcport->vha, DID_NO_CONNECT << 16);
> + qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24,
> + 0, WAIT_TARGET);
> return;
> }
> /*
> @@ -2786,6 +2790,15 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
> qla2x00_port_logout(fcport->vha, fcport);
> }
> }
> +
> + /* check for any straggling io left behind */
> + if (qla2x00_eh_wait_for_pending_commands(fcport->vha, fcport->d_id.b24, 0, WAIT_TARGET)) {
> + ql_log(ql_log_warn, vha, 0x300b,
> +       "IO not return.  Resetting. \n");
> + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
> + qla2xxx_wake_dpc(vha);
> + qla2x00_wait_for_chip_reset(vha);
> + }
> }
> 
> static int
> -- 
> 2.23.1
> 
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>

-- 
Himanshu Madhani Oracle Linux Engineering





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux