[PATCH] scsi: pm80xx: Add GET_NVMD timeout during probe

[Pranav Prasad <pranavpp@xxxxxxxxxx>]

From: Changyuan Lyu <changyuanl@xxxxxxxxxx>

Added a wait timeout to prevent the kernel from waiting for the 
GET_NVMD response forever during probe. Added a check for the
controller state before issuing GET_NVMD request.

Signed-off-by: Changyuan Lyu <changyuanl@xxxxxxxxxx>
Signed-off-by: Pranav Prasad <pranavpp@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_init.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 7e589fe3e010..5ca20ccdce34 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -666,7 +666,7 @@ static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
  * Currently we just set the fixed SAS address to our HBA, for manufacture,
  * it should read from the EEPROM
  */
-static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 {
 	u8 i, j;
 	u8 sas_add[8];
@@ -679,6 +679,12 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 	struct pm8001_ioctl_payload payload;
 	u16 deviceid;
 	int rc;
+	unsigned long time_remaining;
+
+	if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
+		pm8001_dbg(pm8001_ha, FAIL, "controller is in fatal error state\n");
+		return -EIO;
+	}
 
 	pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
 	pm8001_ha->nvmd_completion = &completion;
@@ -703,16 +709,23 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 	payload.offset = 0;
 	payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
 	if (!payload.func_specific) {
-		pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n");
-		return;
+		pm8001_dbg(pm8001_ha, FAIL, "mem alloc fail\n");
+		return -ENOMEM;
 	}
 	rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 	if (rc) {
 		kfree(payload.func_specific);
-		pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
-		return;
+		pm8001_dbg(pm8001_ha, FAIL, "nvmd failed\n");
+		return -EIO;
+	}
+	time_remaining = wait_for_completion_timeout(&completion,
+				msecs_to_jiffies(60*1000)); // 1 min
+	if (!time_remaining) {
+		kfree(payload.func_specific);
+		pm8001_dbg(pm8001_ha, FAIL, "get_nvmd_req timeout\n");
+		return -EIO;
 	}
-	wait_for_completion(&completion);
+
 
 	for (i = 0, j = 0; i <= 7; i++, j++) {
 		if (pm8001_ha->chip_id == chip_8001) {
@@ -751,6 +764,7 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 	memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
 		SAS_ADDR_SIZE);
 #endif
+	return 0;
 }
 
 /*
@@ -1166,7 +1180,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 		pm80xx_set_thermal_config(pm8001_ha);
 	}
 
-	pm8001_init_sas_add(pm8001_ha);
+	if (pm8001_init_sas_add(pm8001_ha))
+		goto err_out_shost;
 	/* phy setting support for motherboard controller */
 	rc = pm8001_configure_phy_settings(pm8001_ha);
 	if (rc)
-- 
2.40.0.634.g4ca3ef3211-goog