From: Arnd Bergmann <arnd@xxxxxxxx>
The suspend/resume functions in this driver seem to have multiple
problems, the latest one just got introduced by a bugfix:
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw':
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count'
5142 | if (atomic_read(&device->power.usage_count)) {
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw':
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count'
5142 | if (atomic_read(&device->power.usage_count)) {
As far as I can tell, the 'usage_count' is not meant to be accessed
by device drivers at all, though I don't know what the driver is
supposed to do instead.
Another problem is the use of the deprecated UNIVERSAL_DEV_PM_OPS(),
and marking functions as __maybe_unused to avoid warnings about
unused functions. This should probably be changed to using
DEFINE_RUNTIME_DEV_PM_OPS().
Both changes require actually understanding what the driver needs to
do, and being able to test this, so instead here is the simplest
patch to make it pass the randconfig builds instead.
Fixes: e368d38cb952 ("scsi: hisi_sas: Exit suspend state when usage count is greater than 0")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
Maintainers: If possible, please revisit this to do a proper fix.
If that takes too much time, this patch can be applied as a
workaround in the meantime, and might also help in case the
e368d38cb952 patch gets backported to stable kernels.
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index d160b9b7479b..12d588454f5d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -5139,11 +5139,13 @@ static int _suspend_v3_hw(struct device *device)
flush_workqueue(hisi_hba->wq);
interrupt_disable_v3_hw(hisi_hba);
+#ifdef CONFIG_PM
if (atomic_read(&device->power.usage_count)) {
dev_err(dev, "PM suspend: host status cannot be suspended\n");
rc = -EBUSY;
goto err_out;
}
+#endif
rc = disable_host_v3_hw(hisi_hba);
if (rc) {
@@ -5162,7 +5164,9 @@ static int _suspend_v3_hw(struct device *device)
err_out_recover_host:
enable_host_v3_hw(hisi_hba);
+#ifdef CONFIG_PM
err_out:
+#endif
interrupt_enable_v3_hw(hisi_hba);
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
clear_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags);
--
2.39.2
