From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> Add QMP PHY config for sa8775p and add support for the new compatible. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx> --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 994ddd5d4a81..126bd47c3fa0 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -823,6 +823,41 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .no_pcs_sw_reset = true, }; + +static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { + .lanes = 2, + + .offsets = &qmp_ufs_offsets, + + .tbls = { + .serdes = sm8350_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes), + .tx = sm8350_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx), + .rx = sm8350_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx), + .pcs = sm8350_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8350_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8350_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), + .rx = sm8350_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), + .pcs = sm8350_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + }, + .clk_list = sm8450_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v5_regs_layout, +}; + static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, @@ -1542,6 +1577,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { }, { .compatible = "qcom,msm8998-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, + }, { + .compatible = "qcom,sa8775p-qmp-ufs-phy", + .data = &sa8775p_ufsphy_cfg, }, { .compatible = "qcom,sc8180x-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, -- 2.37.2