[PATCH AUTOSEL 6.2 21/30] scsi: mpi3mr: Bad drive in topology results kernel crash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>

[ Upstream commit 8e45183978d64699df639e795235433a60f35047 ]

When the SAS Transport Layer support is enabled and a device exposed to
the OS by the driver fails INQUIRY commands, the driver frees up the memory
allocated for an internal HBA port data structure. However, in some places,
the reference to the freed memory is not cleared. When the firmware sends
the Device Info change event for the same device again, the freed memory is
accessed and that leads to memory corruption and OS crash.

Signed-off-by: Ranjan Kumar <ranjan.kumar@xxxxxxxxxxxx>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@xxxxxxxxxxxx
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index b795a325534d3..be25f242fa794 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -2358,15 +2358,16 @@ int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc,
 	tgtdev->host_exposed = 1;
 	if (!mpi3mr_sas_port_add(mrioc, tgtdev->dev_handle,
 	    sas_address_parent, hba_port)) {
-		tgtdev->host_exposed = 0;
 		retval = -1;
-	} else if ((!tgtdev->starget)) {
-		if (!mrioc->is_driver_loading)
+		} else if ((!tgtdev->starget) && (!mrioc->is_driver_loading)) {
 			mpi3mr_sas_port_remove(mrioc, sas_address,
 			    sas_address_parent, hba_port);
-		tgtdev->host_exposed = 0;
 		retval = -1;
 	}
+	if (retval) {
+		tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
+		tgtdev->host_exposed = 0;
+	}
 	return retval;
 }
 
@@ -2395,6 +2396,7 @@ void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc,
 	mpi3mr_sas_port_remove(mrioc, sas_address, sas_address_parent,
 	    hba_port);
 	tgtdev->host_exposed = 0;
+	tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
 }
 
 /**
@@ -2451,7 +2453,7 @@ static u8 mpi3mr_get_port_id_by_rphy(struct mpi3mr_ioc *mrioc, struct sas_rphy *
 
 		tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc,
 			    rphy->identify.sas_address, rphy);
-		if (tgtdev) {
+		if (tgtdev && tgtdev->dev_spec.sas_sata_inf.hba_port) {
 			port_id =
 				tgtdev->dev_spec.sas_sata_inf.hba_port->port_id;
 			mpi3mr_tgtdev_put(tgtdev);
-- 
2.39.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux