On 7/27/07, Bjarne Thomsen <bjarne.b.thomsen@xxxxxxxxx> wrote: > I have a dual Opteron Tyan MB (S2885) with 4 PCI-X slots. > The 2 first slots can work up to 100 MHz, the last 2 up to 66 MHz. > > I have 2 PCI-X Adaptec SCSI controllers: 29160 and 39320A. > A SCSI disk is connected to port A on the 39320A. > > When I mount the 39320A in any of the 4 slots the system hangs > after a few seconds (with no error messages in syslog) when I > copy a directory with many files to the SCIS disk. > > However, when I mount both controllers in either slots 1 and 2 > or slots 3 and 4 I can copy 25GB of files without any hang-up. > > I need some help to figure this out. It is a mystery to me. > Could it be FW in 29160 is more new than that in 39320A? and when two cards installed, only one FW is executed... YH - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
