[PATCH v7 19/22] scsi: ses: Have scsi-ml retry scsi_exec_req errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This has ses have scsi-ml retry scsi_exec_req errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
 drivers/scsi/ses.c | 60 ++++++++++++++++++++++++++++++----------------
 1 file changed, 40 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 869ca9c7f23f..c9090ce66781 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -87,19 +87,29 @@ static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 		0
 	};
 	unsigned char recv_page_code;
-	unsigned int retries = SES_RETRIES;
-	struct scsi_sense_hdr sshdr;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 	const struct scsi_exec_args exec_args = {
-		.sshdr = &sshdr,
+		.failures = failures,
 	};
 
-	do {
-		ret = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buf, bufflen,
-				       SES_TIMEOUT, 1, &exec_args);
-	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
-		 (sshdr.sense_key == NOT_READY ||
-		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
-
+	ret = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buf, bufflen,
+			       SES_TIMEOUT, 1, &exec_args);
 	if (unlikely(ret))
 		return ret;
 
@@ -131,19 +141,29 @@ static int ses_send_diag(struct scsi_device *sdev, int page_code,
 		bufflen & 0xff,
 		0
 	};
-	struct scsi_sense_hdr sshdr;
-	unsigned int retries = SES_RETRIES;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = SES_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 	const struct scsi_exec_args exec_args = {
-		.sshdr = &sshdr,
+		.failures = failures,
 	};
 
-	do {
-		result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, buf,
-					  bufflen, SES_TIMEOUT, 1, &exec_args);
-	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
-		 (sshdr.sense_key == NOT_READY ||
-		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
-
+	result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, buf, bufflen,
+				  SES_TIMEOUT, 1, &exec_args);
 	if (result)
 		sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
 			    result);
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux