[PATCH v7 11/22] scsi: spi: Have scsi-ml retry spi_execute errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This has spi_execute have scsi-ml retry errors instead of driving them.

There is one behavior change where we no longer retry when
scsi_execute_cmd returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there
are no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern we use GFP_NOIO, so retrying
will probably not help.

Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
 drivers/scsi/scsi_transport_spi.c | 35 ++++++++++++++++---------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 2442d4d2e3f3..b269144dca3e 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -108,29 +108,30 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 		       enum req_op op, void *buffer, unsigned int bufflen,
 		       struct scsi_sense_hdr *sshdr)
 {
-	int i, result;
-	struct scsi_sense_hdr sshdr_tmp;
 	blk_opf_t opf = op | REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
 			REQ_FAILFAST_DRIVER;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = SCMD_FAILURE_ASC_ANY,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = DV_RETRIES,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 	const struct scsi_exec_args exec_args = {
 		.req_flags = BLK_MQ_REQ_PM,
-		.sshdr = sshdr ? : &sshdr_tmp,
+		.sshdr = sshdr,
+		.failures = failures,
 	};
 
-	sshdr = exec_args.sshdr;
-
-	for(i = 0; i < DV_RETRIES; i++) {
-		/*
-		 * The purpose of the RQF_PM flag below is to bypass the
-		 * SDEV_QUIESCE state.
-		 */
-		result = scsi_execute_cmd(sdev, cmd, opf, buffer, bufflen,
-					  DV_TIMEOUT, 1, &exec_args);
-		if (result < 0 || !scsi_sense_valid(sshdr) ||
-		    sshdr->sense_key != UNIT_ATTENTION)
-			break;
-	}
-	return result;
+	/*
+	 * The purpose of the RQF_PM flag below is to bypass the
+	 * SDEV_QUIESCE state.
+	 */
+	return scsi_execute_cmd(sdev, cmd, opf, buffer, bufflen, DV_TIMEOUT, 1,
+				&exec_args);
 }
 
 static struct {
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux