On Thu, 2007-07-26 at 16:46 -0400, James Bottomley wrote:
> On Thu, 2007-07-26 at 16:00 -0400, Freels, James D. wrote:
> > 9) the output from the commands you asked for are shown below for the
> > 2.6.22.1 kernel. They indicate parity errors on the changer at scsi
> > id=3. Also, when booting up under 2.6.18.8, the linux media changer
> > scsi device works and initializes; when booting up under 2.6.22.1, it
> > does not; probably because of the same parity errors ?
> >
> > target0:0:3: Beginning Domain Validation
> > target0:0:3: asynchronous
> > target0:0:3: FAST-20 WIDE SCSI 40.0
> ^^^^
> This is the problem.
>
> Something in the transport class is causing WIDE to be set regardless of
> the max_width setting ... this looks to be a bug in the aic7xxx
> transport class implementation
>
> > MB/s ST (50 ns, offset 32)
> > (scsi0:A:3:0): parity error detected in Data-in phase. SEQADDR(0x1a6)
> > SCSIRATE(0x95)
>
> Once it goes wide on a narrow device, you get immediate parity errors
> half the time, because you're missing the upper 8 bits for the parity
> calculation.
>
> I'll see if I can trace this inside the driver ... naturally, I have no
> aic7xxx setup where I only have a narrow device.
OK, could you try the attached as the fix ... I've verified a similar
problem on the aic79xx which this fixes ... I just don't have access to
an aic7xxx currently to try it out with, but I think it should work.
James
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 286ab83..641dc4e 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2284,9 +2284,12 @@ static void ahd_linux_set_period(struct scsi_target *starget, int period)
if (period < 8)
period = 8;
if (period < 10) {
- ppr_options |= MSG_EXT_PPR_DT_REQ;
- if (period == 8)
- ppr_options |= MSG_EXT_PPR_IU_REQ;
+ if (spi_max_width(starget)) {
+ ppr_options |= MSG_EXT_PPR_DT_REQ;
+ if (period == 8)
+ ppr_options |= MSG_EXT_PPR_IU_REQ;
+ } else
+ period = 10;
}
dt = ppr_options & MSG_EXT_PPR_DT_REQ;
@@ -2365,7 +2368,7 @@ static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
printf("%s: %s DT\n", ahd_name(ahd),
dt ? "enabling" : "disabling");
#endif
- if (dt) {
+ if (dt && spi_max_width(starget)) {
ppr_options |= MSG_EXT_PPR_DT_REQ;
if (!width)
ahd_linux_set_width(starget, 1);
@@ -2447,7 +2450,7 @@ static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
iu ? "enabling" : "disabling");
#endif
- if (iu) {
+ if (iu && spi_max_width(starget)) {
ppr_options |= MSG_EXT_PPR_IU_REQ;
ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
}
@@ -2487,7 +2490,7 @@ static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
rdstrm ? "enabling" : "disabling");
#endif
- if (rdstrm)
+ if (rdstrm && spi_max_width(starget))
ppr_options |= MSG_EXT_PPR_RD_STRM;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
@@ -2523,7 +2526,7 @@ static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
wrflow ? "enabling" : "disabling");
#endif
- if (wrflow)
+ if (wrflow && spi_max_width(starget))
ppr_options |= MSG_EXT_PPR_WR_FLOW;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
@@ -2567,7 +2570,7 @@ static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
rti ? "enabling" : "disabling");
#endif
- if (rti)
+ if (rti && spi_max_width(starget))
ppr_options |= MSG_EXT_PPR_RTI;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
@@ -2603,7 +2606,7 @@ static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
pcomp ? "Enable" : "Disable");
#endif
- if (pcomp) {
+ if (pcomp && spi_max_width(starget)) {
uint8_t precomp;
if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
@@ -2647,7 +2650,7 @@ static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
unsigned long flags;
- if (hold)
+ if (hold && spi_max_width(starget))
ppr_options |= MSG_EXT_PPR_HOLD_MCS;
ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 1803ab6..2e9c38f 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -2317,8 +2317,13 @@ static void ahc_linux_set_period(struct scsi_target *starget, int period)
if (period < 9)
period = 9; /* 12.5ns is our minimum */
- if (period == 9)
- ppr_options |= MSG_EXT_PPR_DT_REQ;
+ if (period == 9) {
+ if (spi_max_width(starget))
+ ppr_options |= MSG_EXT_PPR_DT_REQ;
+ else
+ /* need wide for DT and need DT for 12.5 ns */
+ period = 10;
+ }
ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
starget->channel + 'A', ROLE_INITIATOR);
@@ -2381,7 +2386,7 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt)
unsigned long flags;
struct ahc_syncrate *syncrate;
- if (dt) {
+ if (dt && spi_max_width(starget)) {
ppr_options |= MSG_EXT_PPR_DT_REQ;
if (!width)
ahc_linux_set_width(starget, 1);
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
