Some platforms like Qcom, requires the UFS device to be reinitialized
after switching to maximum gear speed. So add support for that in UFS
core by introducing a new quirk (UFSHCD_CAP_REINIT_AFTER_MAX_GEAR_SWITCH)
and doing the reinitialization, if the quirk is enabled by the controller
driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
drivers/ufs/core/ufshcd.c | 63 +++++++++++++++++++++++++++++----------
include/ufs/ufshcd.h | 6 ++++
2 files changed, 53 insertions(+), 16 deletions(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 7256e6c43ca6..c44ffb63d48f 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -8161,27 +8161,18 @@ static int ufshcd_add_lus(struct ufs_hba *hba)
return ret;
}
-/**
- * ufshcd_probe_hba - probe hba to detect device and initialize it
- * @hba: per-adapter instance
- * @init_dev_params: whether or not to call ufshcd_device_params_init().
- *
- * Execute link-startup and verify device initialization
- */
-static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
+static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
{
int ret;
- unsigned long flags;
- ktime_t start = ktime_get();
hba->ufshcd_state = UFSHCD_STATE_RESET;
ret = ufshcd_link_startup(hba);
if (ret)
- goto out;
+ return ret;
if (hba->quirks & UFSHCD_QUIRK_SKIP_PH_CONFIGURATION)
- goto out;
+ return ret;
/* Debug counters initialization */
ufshcd_clear_dbg_ufs_stats(hba);
@@ -8192,12 +8183,12 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
/* Verify device initialization by sending NOP OUT UPIU */
ret = ufshcd_verify_dev_init(hba);
if (ret)
- goto out;
+ return ret;
/* Initiate UFS initialization, and waiting until completion */
ret = ufshcd_complete_dev_init(hba);
if (ret)
- goto out;
+ return ret;
/*
* Initialize UFS device parameters used by driver, these
@@ -8206,7 +8197,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
if (init_dev_params) {
ret = ufshcd_device_params_init(hba);
if (ret)
- goto out;
+ return ret;
}
ufshcd_tune_unipro_params(hba);
@@ -8227,11 +8218,51 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
if (ret) {
dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n",
__func__, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_probe_hba - probe hba to detect device and initialize it
+ * @hba: per-adapter instance
+ * @init_dev_params: whether or not to call ufshcd_device_params_init().
+ *
+ * Execute link-startup and verify device initialization
+ */
+static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)
+{
+ ktime_t start = ktime_get();
+ unsigned long flags;
+ int ret;
+
+ ret = ufshcd_device_init(hba, init_dev_params);
+ if (ret)
+ goto out;
+
+ if (hba->quirks & UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH) {
+ /* Reset the device and controller before doing reinit */
+ ufshcd_device_reset(hba);
+ ufshcd_hba_stop(hba);
+ ufshcd_vops_reinit_notify(hba);
+ ret = ufshcd_hba_enable(hba);
+ if (ret) {
+ dev_err(hba->dev, "Host controller enable failed\n");
+ ufshcd_print_evt_hist(hba);
+ ufshcd_print_host_state(hba);
goto out;
}
- ufshcd_print_pwr_info(hba);
+
+ /* Reinit the device */
+ ret = ufshcd_device_init(hba, init_dev_params);
+ if (ret)
+ goto out;
}
+ ufshcd_print_pwr_info(hba);
+
/*
* bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec)
* and for removable UFS card as well, hence always set the parameter.
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 09927a011a84..d3e8aa7a4207 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -595,6 +595,12 @@ enum ufshcd_quirks {
* auto-hibernate capability but it's FASTAUTO only.
*/
UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18,
+
+ /*
+ * This quirk needs to be enabled if the host controller needs
+ * to reinit the device after switching to maximum gear.
+ */
+ UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19,
};
enum ufshcd_caps {
--
2.25.1
