[PATCH 07/15] scsi: spi: Convert to scsi_execute_cmd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



scsi_execute is going to be removed. Convert to the SPI class to
scsi_execute_cmd.

Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
 drivers/scsi/scsi_transport_spi.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index f569cf0095c2..ea71135ab3b1 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -105,13 +105,13 @@ static int sprint_frac(char *dest, int value, int denom)
 }
 
 static int spi_execute(struct scsi_device *sdev, const void *cmd,
-		       enum dma_data_direction dir,
-		       void *buffer, unsigned bufflen,
+		       enum req_op op, void *buffer, unsigned int bufflen,
 		       struct scsi_sense_hdr *sshdr)
 {
 	int i, result;
-	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
 	struct scsi_sense_hdr sshdr_tmp;
+	blk_opf_t opf = op | REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
+			REQ_FAILFAST_DRIVER;
 
 	if (!sshdr)
 		sshdr = &sshdr_tmp;
@@ -121,12 +121,12 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 		 * The purpose of the RQF_PM flag below is to bypass the
 		 * SDEV_QUIESCE state.
 		 */
-		result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
-				      sshdr, DV_TIMEOUT, /* retries */ 1,
-				      REQ_FAILFAST_DEV |
-				      REQ_FAILFAST_TRANSPORT |
-				      REQ_FAILFAST_DRIVER,
-				      RQF_PM, NULL);
+		result = scsi_execute_cmd(sdev, cmd, opf, buffer, bufflen,
+					  DV_TIMEOUT, 1,
+					  ((struct scsi_exec_args) {
+						.sshdr = sshdr,
+						.req_flags = BLK_MQ_REQ_PM,
+					  }));
 		if (result < 0 || !scsi_sense_valid(sshdr) ||
 		    sshdr->sense_key != UNIT_ATTENTION)
 			break;
@@ -675,7 +675,7 @@ spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
 	}
 
 	for (r = 0; r < retries; r++) {
-		result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
+		result = spi_execute(sdev, spi_write_buffer, REQ_OP_DRV_OUT,
 				     buffer, len, &sshdr);
 		if(result || !scsi_device_online(sdev)) {
 
@@ -697,7 +697,7 @@ spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
 		}
 
 		memset(ptr, 0, len);
-		spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
+		spi_execute(sdev, spi_read_buffer, REQ_OP_DRV_IN,
 			    ptr, len, NULL);
 		scsi_device_set_state(sdev, SDEV_QUIESCE);
 
@@ -722,7 +722,7 @@ spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
 	for (r = 0; r < retries; r++) {
 		memset(ptr, 0, len);
 
-		result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
+		result = spi_execute(sdev, spi_inquiry, REQ_OP_DRV_IN,
 				     ptr, len, NULL);
 		
 		if(result || !scsi_device_online(sdev)) {
@@ -828,7 +828,7 @@ spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
 	 * (reservation conflict, device not ready, etc) just
 	 * skip the write tests */
 	for (l = 0; ; l++) {
-		result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE, 
+		result = spi_execute(sdev, spi_test_unit_ready, REQ_OP_DRV_IN,
 				     NULL, 0, NULL);
 
 		if(result) {
@@ -841,7 +841,7 @@ spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
 	}
 
 	result = spi_execute(sdev, spi_read_buffer_descriptor, 
-			     DMA_FROM_DEVICE, buffer, 4, NULL);
+			     REQ_OP_DRV_IN, buffer, 4, NULL);
 
 	if (result)
 		/* Device has no echo buffer */
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux