Re: [PATCH RFC v3 2/7] ata: libata-scsi: Add ata_internal_queuecommand()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/2/22 20:12, Hannes Reinecke wrote:
> On 11/2/22 11:07, Damien Le Moal wrote:
>> On 11/2/22 18:52, John Garry wrote:
>>> Hi Damien,
>>>
> [ .. ]
>>>>> Or re-use 1 from 32 (and still also have 1 separate internal command)?
>>>>
>>>> I am not yet 100% sure if we can treat that internal NCQ read log like
>>>> any other read/write request... If we can, then the 1-out-of-32
>>>> reservation would not be needed. Need to revisit all the cases we need
>>>> to take care of (because in the middle of this CDL completion handling,
>>>> regular NCQ errors can happen, resulting in a drive reset that could
>>>> wreck everything as we lose the sense data for the completed requests).
>>>>
>>>> In any case, I think that we can deal with that extra reserved command
>>>> on top of you current series. No need to worry about it for now I think.
>>>>
>>>
>>> So are you saying that you are basing current CDL support on libata
>>> internally managing this extra reserved tag (and so do not need this
>>> SCSI midlayer reserved tag support yet)?
>>
>> Not really. For now, it is using libata EH, that is, when we need the
>> internal command for the read log, we know the device is idle and no
>> command is on-going. So we send a non-NCQ command which does not have a tag.
>>
>> Ideally, all of this should use a real reserved tag to allow for an NCQ
>> read log outside of EH, avoiding the drive queue drain.
>>
> But with the current design you'll only get that if you reserve one 
> precious tag.

yes, which is annoying. Back to the days where ATA max qd was 31...

> OTOH, we might not need that tag at all, as _if_ we get an error for a 
> specific command the tag associated with it is necessarily free after 
> completion, right?

Well, it is not really free. It is unused as far as the device is
concerned since the command that needs to be checked completed. But not
free yet since we need to do the read log first before being able to
scsi-complete the command (which will free the tag). So if we use the
regular submission path to issue the read log, we must be guaranteed that
we can get a tag, otherwise we will deadlock. Hence the need to reserve
one tag.


> So we only need to find a way of 're-using' that tag, then we won't have 
> to set aside a reserved tag and everything would be dandy...

I tried that. It is very ugly... Problem is that integration with EH in
case a real NCQ error happens when all that read-log-complete dance is
happening is hard. And don't get me started with the need to save/restore
the scsi command context of the command we are reusing the tag from.

And given that the code is changing to use regular submission path for
internal commands, right now, we need a reserved tag. Or a way to "borrow"
the tag from a request that we need to check. Which means we need some
additional api to not always try to allocate a tag.

> 
> Maybe we can stop processing when we receive an error (should be doing 
> that anyway as otherwise the log might be overwritten), then we should 
> be having a pretty good chance of getting that tag.

Hmmm.... that would be no better than using EH which does stop processing
until the internal house keeping is done.

> Or, precisely, getting _any_ tag as at least one tag is free at that point.
> Hmm?

See above. Not free, but usable as far as the device is concerned since we
have at least on command we need to check completed at the device level
(but not yet completed from scsi/block layer point of view).

> 
> Cheers,
> 
> Hannes

-- 
Damien Le Moal
Western Digital Research




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux