[PATCH v3 18/19] scsi: target: Don't support SCSI-2 RESERVE/RELEASE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The pr_ops don't support SCSI-2 RESERVE/RELEASE so fail them during
parsing.

Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
 drivers/target/target_core_spc.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 7cca3b15472b..fb5febc437a0 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -1320,12 +1320,25 @@ spc_parse_cdb(struct se_cmd *cmd, unsigned int *size)
 	struct se_device *dev = cmd->se_dev;
 	unsigned char *cdb = cmd->t_task_cdb;
 
-	if (!dev->dev_attrib.emulate_pr &&
-	    ((cdb[0] == PERSISTENT_RESERVE_IN) ||
-	     (cdb[0] == PERSISTENT_RESERVE_OUT) ||
-	     (cdb[0] == RELEASE || cdb[0] == RELEASE_10) ||
-	     (cdb[0] == RESERVE || cdb[0] == RESERVE_10))) {
-		return TCM_UNSUPPORTED_SCSI_OPCODE;
+	switch (cdb[0]) {
+	case RESERVE:
+	case RESERVE_10:
+	case RELEASE:
+	case RELEASE_10:
+		if (!dev->dev_attrib.emulate_pr)
+			return TCM_UNSUPPORTED_SCSI_OPCODE;
+		/*
+		 * The block layer pr_ops don't support the old RESERVE/RELEASE
+		 * commands.
+		 */
+		if (dev->transport_flags & TRANSPORT_FLAG_PASSTHROUGH_PGR)
+			return TCM_UNSUPPORTED_SCSI_OPCODE;
+		break;
+	case PERSISTENT_RESERVE_IN:
+	case PERSISTENT_RESERVE_OUT:
+		if (!dev->dev_attrib.emulate_pr)
+			return TCM_UNSUPPORTED_SCSI_OPCODE;
+		break;
 	}
 
 	switch (cdb[0]) {
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux