Re: [Bug] double ->queue_rq() because of timeout in ->queue_rq()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 20, 2022 at 05:10:13PM +0800, Ming Lei wrote:
> Hi,
> 
> David Jeffery found one double ->queue_rq() issue, so far it can
> be triggered in the following two cases:
> 
> 1) scsi driver in guest kernel
> 
> - the story could be long vmexit latency or long preempt latency of
> vCPU pthread, then IO req is timed out before queuing the request
> to hardware but after calling blk_mq_start_request() during ->queue_rq(),
> then timeout handler handles it by requeue, then double ->queue_rq() is
> caused, and kernel panic
> 
> 2) burst of kernel messages from irq handler 
> 
> For 1), I think it is one reasonable case, given latency from host side
> can come anytime in theory because vCPU is emulated by one normal host
> pthread which can be preempted anywhere. For 2), I guess kernel message is
> supposed to be rate limited.
> 
> Firstly, is this kind of so long(30sec) random latency when running kernel
> code something normal? Or do we need to take care of it? IMO, it looks
> reasonable in case of VM, but our VM experts may have better idea about this
> situation. Also the default 30sec timeout could be reduced via sysfs or
> drivers.

30 seconds is a long latency that does not occur during normal
operation, but unfortunately does happen on occasion.

I think there's an interest in understanding the root cause and solving
long latencies (if possible) in the QEMU/KVM communities. We can
investigate specific cases on kvm@xxxxxxxxxxxxxxx and/or
qemu-devel@xxxxxxxxxx.

The kernel should be robust in the face of long latencies even if they
are due to issues with hardware or the hypervisor. I'm not familiar
enough with the Linux block layer to say whether the patch below is
correct, but having a solution in place would be good.

> 
> Suppose it is one reasonable report to fix, what is the preferred solution?
> 
> So far, it is driver's responsibility to cover the race between timeout
> and completion, so it is supposed to be solved in driver in theory, given
> driver has enough knowledge.
> 
> But it is really one common problem, lots of driver could have similar
> issue, and could be hard to fix all affected drivers, so David suggests
> the following patch by draining in-progress ->queue_rq() for this issue.
> And the patch looks reasonable too.
> 
> Any comments for this issue and the solution?
> 
> 
> diff --git a/block/blk-mq.c b/block/blk-mq.c
> index 8070b6c10e8d..ca57c060bb65 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -1523,7 +1523,12 @@ static void blk_mq_rq_timed_out(struct request *req)
>  	blk_add_timer(req);
>  }
>  
> -static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
> +struct blk_expired_data {
> +	unsigned long next;
> +	unsigned long now;
> +};
> +
> +static bool blk_mq_req_expired(struct request *rq, struct blk_expired_data *expired)
>  {
>  	unsigned long deadline;
>  
> @@ -1533,13 +1538,13 @@ static bool blk_mq_req_expired(struct request *rq, unsigned long *next)
>  		return false;
>  
>  	deadline = READ_ONCE(rq->deadline);
> -	if (time_after_eq(jiffies, deadline))
> +	if (time_after_eq(expired->now, deadline))
>  		return true;
>  
> -	if (*next == 0)
> -		*next = deadline;
> -	else if (time_after(*next, deadline))
> -		*next = deadline;
> +	if (expired->next == 0)
> +		expired->next = deadline;
> +	else if (time_after(expired->next, deadline))
> +		expired->next = deadline;
>  	return false;
>  }
>  
> @@ -1555,7 +1560,7 @@ void blk_mq_put_rq_ref(struct request *rq)
>  
>  static bool blk_mq_check_expired(struct request *rq, void *priv)
>  {
> -	unsigned long *next = priv;
> +	struct blk_expired_data *expired = priv;
>  
>  	/*
>  	 * blk_mq_queue_tag_busy_iter() has locked the request, so it cannot
> @@ -1564,7 +1569,7 @@ static bool blk_mq_check_expired(struct request *rq, void *priv)
>  	 * it was completed and reallocated as a new request after returning
>  	 * from blk_mq_check_expired().
>  	 */
> -	if (blk_mq_req_expired(rq, next))
> +	if (blk_mq_req_expired(rq, expired))
>  		blk_mq_rq_timed_out(rq);
>  	return true;
>  }
> @@ -1573,7 +1578,7 @@ static void blk_mq_timeout_work(struct work_struct *work)
>  {
>  	struct request_queue *q =
>  		container_of(work, struct request_queue, timeout_work);
> -	unsigned long next = 0;
> +	struct blk_expired_data expired = {.next = 0, .now = jiffies};
>  	struct blk_mq_hw_ctx *hctx;
>  	unsigned long i;
>  
> @@ -1593,10 +1598,17 @@ static void blk_mq_timeout_work(struct work_struct *work)
>  	if (!percpu_ref_tryget(&q->q_usage_counter))
>  		return;
>  
> -	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &next);
> +	/* Before walking tags, we must ensure any submit started before the
> +	 * current time has finished. Since the submit uses srcu or rcu, wait
> +	 * for a synchronization point to ensure all running submits have
> +	 * finished
> +	 */
> +	blk_mq_wait_quiesce_done(q);
> +
> +	blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &expired);
>  
> -	if (next != 0) {
> -		mod_timer(&q->timeout, next);
> +	if (expired.next != 0) {
> +		mod_timer(&q->timeout, expired.next);
>  	} else {
>  		/*
>  		 * Request timeouts are handled as a forward rolling timer. If
> 
> 
> 
> Thanks, 
> Ming
> 

Attachment: signature.asc
Description: PGP signature


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux