[v2,PATCH 0/3] Make target send correct io limits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently iblock always reports MAXIMUM TRANSFER LENGTH in 512b units
regardless of the LU block size.

Target block size:
  target:~ # fdisk -l /dev/nullb0
  Disk /dev/nullb0: 250 GiB, 268435456000 bytes, 65536000 sectors
  Units: sectors of 1 * 4096 = 4096 bytes
  Sector size (logical/physical): 4096 bytes / 4096 bytes
  I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Initiator block size:
  initiator:~ # fdisk -l /dev/sdc
  Disk /dev/sdc: 250 GiB, 268435456000 bytes, 65536000 sectors
  Disk model: nullb0
  Units: sectors of 1 * 4096 = 4096 bytes
  Sector size (logical/physical): 4096 bytes / 4096 bytes
  I/O size (minimum/optimal): 4096 bytes / 131072 bytes

target max transfer length limit:
  target:~ # cat /sys/block/nullb0/queue/max_hw_sectors_kb
  128

So the maximum transfer length should be 128 * 1024 / 4096 = 32 blocks
But the target sends MTL in 512b units, so the initiators see 256 blocks
instead.

  initiator:~ # sg_inq -p 0xb0 /dev/sdc
  VPD INQUIRY: Block limits page (SBC)
    Maximum compare and write length: 1 blocks
    Optimal transfer length granularity: 1 blocks
    Maximum transfer length: 256 blocks
    Optimal transfer length: 32 blocks
    Maximum prefetch transfer length: 0 blocks [ignored]

This happens because MAXIMUM TRANSFER LENGTH field in VPD Block Limits
page is derived from dev->dev_attrib.hw_max_sectors which happens to be
in 512b units for iblock. This patch series fixes this issue and removes
some special-casing for other backstores.

The last time this patch set was sent, a kernel bot found some issues
with building a kernel for i586 and m68k using a cross-compiler. I tried
to reproduce this issues locally but didn't succeed. Even with given
configs all things are built correctly without errors. For m68k I used
m68k-linux-gnu-gcc version 11.2.0, for i586 I used
i586-unknown-linux-gnu-gcc version 8.3.0. It would be great if you could
share the kernel bot’s cross-compilers.

Anastasia Kovaleva (3):
  target: core: Send mtl in blocks
  target: core: make hw_max_sectors store the sectors amount in blocks
  target: core: Change the way target_xcopy_do_work sets restiction on
    max io

 drivers/target/target_core_configfs.c |  2 -
 drivers/target/target_core_file.c     |  1 -
 drivers/target/target_core_iblock.c   |  4 +-
 drivers/target/target_core_spc.c      |  6 +-
 drivers/target/target_core_xcopy.c    | 96 ++++++++++++++-------------
 drivers/target/target_core_xcopy.h    |  2 +-
 include/target/target_core_base.h     |  1 -
 7 files changed, 59 insertions(+), 53 deletions(-)

-- 
2.30.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux