[PATCH v3 0/7] scsi: libsas: Use request tag in more drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently hisi_sas is the only libsas driver which uses the request tag
for per-HW IO tag.

All other libsas drivers manage the tags internally. Tag management in
pm8001 and mvsas is currently using a simple bitmap, so use the request
tag when available there. With this change we still need to manage tags
for libsas "internal" commands, like SMP commands, and any other
private commands so reserve some tags for this:
- For pm8001 I went with pre-existing and unused PM8001_RESERVE_SLOT size.
  The value is 8, which should be enough. It is greater than mvsas, below,
  but this driver sends a lot of other private commands to HW.
- For mvsas I went with 4, which still should be enough.

isci and aic9xx have elaborate tag alloc schemes, so I'm not going to
bother changing them, especially since I have no HW to test with.

Helper sas_task_find_rq() is added to get the request and associated tag
per sas_task when it is available.

This series looks not to conflict with
https://lore.kernel.org/linux-scsi/20220928070130.3657183-1-yanaijie@xxxxxxxxxx/T/#mefdcb7b63b4e6ebc8b77a689b3923571ab3d33ab

Based on https://lore.kernel.org/linux-scsi/1664262298-239952-1-git-send-email-john.garry@xxxxxxxxxx/T/#t

Differences to v2:
- Put private tags at bottom of tagset for each driver (Hannes)
- Add RB tags from Jason, Jack, and Hannes (thanks!)

Differences to v1:
- Rework sas_task_find_rq()
- Rename tags->rsvd and remove tag size struct arg for both mvsas and
  pm8001
- Decrement can_queue for mvsas
- Use sas_task_find_rq() in pm80xx_chip_get_q_index()
- Add Damien's tags (thanks)

Igor Pylypiv (1):
  scsi: pm8001: Remove pm8001_tag_init()

John Garry (6):
  scsi: libsas: Add sas_task_find_rq()
  scsi: hisi_sas: Use sas_task_find_rq()
  scsi: hisi_sas: Put reserved tags in lower region of tagset
  scsi: pm8001: Use sas_task_find_rq() for tagging
  scsi: mvsas: Delete mvs_tag_init()
  scsi: mvsas: Use sas_task_find_rq() for tagging

 drivers/scsi/hisi_sas/hisi_sas_main.c | 38 +++++++++---------------
 drivers/scsi/mvsas/mv_defs.h          |  1 +
 drivers/scsi/mvsas/mv_init.c          | 11 ++++---
 drivers/scsi/mvsas/mv_sas.c           | 42 ++++++++++++++-------------
 drivers/scsi/mvsas/mv_sas.h           |  8 +----
 drivers/scsi/pm8001/pm8001_init.c     | 14 +++------
 drivers/scsi/pm8001/pm8001_sas.c      | 20 ++++++-------
 drivers/scsi/pm8001/pm8001_sas.h      | 12 +++++---
 drivers/scsi/pm8001/pm80xx_hwi.c      | 17 ++---------
 include/scsi/libsas.h                 | 18 ++++++++++++
 10 files changed, 85 insertions(+), 96 deletions(-)

-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux