[PATCH v3 21/35] scsi: retry INQUIRY after timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Description from: Martin Wilck <mwilck@xxxxxxxx>:

The SCSI mid layer doesn't retry commands after DID_TIME_OUT (see
scsi_noretry_cmd()). Packet loss in the fabric can cause spurious timeouts
during SCSI device probing, causing device probing to fail. This has been
observed in FCoE uplink failover tests, for example.

This patch fixes the issue by retrying the INQUIRY up to 3 times (in
practice, we never observed more than a single retry),

Signed-off-by: Mike Christie <michael.christie@xxxxxxxxxx>
---
 drivers/scsi/scsi_scan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 83f33b215e4c..c45646da6c71 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -674,6 +674,10 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
 			.allowed = 3,
 			.result = SAM_STAT_CHECK_CONDITION,
 		},
+		{
+			.allowed = 1,
+			.result = DID_TIME_OUT << 16,
+		},
 		{},
 	};
 
-- 
2.25.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux