On Fri, Sep 02, 2022 at 02:16:33AM +0800, Zhuo Chen wrote:
> When state is pci_channel_io_frozen in pcie_do_recovery(),
> the severity is fatal and fatal status should be cleared.
> So we add pci_aer_clear_fatal_status().
Seems sensible to me. Did you find this by code inspection or by
debugging a problem? If the latter, it would be nice to mention the
symptoms of the problem in the commit log.
> Since pcie_aer_is_native() in pci_aer_clear_fatal_status()
> and pci_aer_clear_nonfatal_status() contains the function of
> 'if (host->native_aer || pcie_ports_native)', so we move them
> out of it.
Wrap commit log to fill 75 columns.
> Signed-off-by: Zhuo Chen <chenzhuo.1@xxxxxxxxxxxxx>
> ---
> drivers/pci/pcie/err.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 0c5a143025af..e0a8ade4c3fe 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -243,10 +243,14 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> * it is responsible for clearing this status. In that case, the
> * signaling device may not even be visible to the OS.
> */
> - if (host->native_aer || pcie_ports_native) {
> + if (host->native_aer || pcie_ports_native)
> pcie_clear_device_status(dev);
pcie_clear_device_status() doesn't check for pcie_aer_is_native()
internally, but after 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status
errors only if OS owns AER") and aa344bc8b727 ("PCI/ERR: Clear AER
status only when we control AER"), both callers check before calling
it.
I think we should move the check inside pcie_clear_device_status().
That could be a separate preliminary patch.
There are a couple other places (aer_root_reset() and
get_port_device_capability()) that do the same check and could be
changed to use pcie_aer_is_native() instead. That could be another
preliminary patch.
> + if (state == pci_channel_io_frozen)
> + pci_aer_clear_fatal_status(dev);
> + else
> pci_aer_clear_nonfatal_status(dev);
> - }
> +
> pci_info(bridge, "device recovery successful\n");
> return status;
>
> --
> 2.30.1 (Apple Git-130)
>
