aacraid 2.6.21+ partition table disappear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I had been last 2 Day in China trying update a Linux (Debian Sarge)
running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1

The boot stuck in a VFS Kernel Panic no root filesystem found.

1) aacraid compiled into kernel - failed
2) as module + initrd                  - failed

the initrd show that the sda with 200GB was found - driver sd
but no partition was found.

Sorry I could not get a serial cable to cover the boot log - and it's impossible
to get one if you can't speak Mandarin.

Do you have any hint what I could do?

Thank you
Chris

Controller is
0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
       Subsystem: Adaptec 2120S (Crusader)


kerneloutput   """  2.6.14.3  """

Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59)
AAC0: kernel 4.2-0[8205]
AAC0: monitor 4.2-0[8205]
AAC0: bios 4.2-0[8205]
AAC0: serial c49a76
AAC0: Non-DASD support enabled.
scsi0 : aacraid
 Vendor: ADAPTEC   Model: XITArray1         Rev: V1.0
 Type:   Direct-Access                      ANSI SCSI revision: 02
 Vendor: SEAGATE   Model: ST373207LC        Rev: D701
 Type:   Direct-Access                      ANSI SCSI revision: 03
 Vendor: SEAGATE   Model: ST373207LC        Rev: D701
 Type:   Direct-Access                      ANSI SCSI revision: 03
 Vendor: SEAGATE   Model: ST373207LC        Rev: D701
 Type:   Direct-Access                      ANSI SCSI revision: 03
 Vendor: SEAGATE   Model: ST373207LC        Rev: D701
 Type:   Direct-Access                      ANSI SCSI revision: 03
 Vendor: SEAGATE   Model: ST373207LC        Rev: D701
 Type:   Direct-Access                      ANSI SCSI revision: 03
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >


--
X-IT Management Ltd.
Office A, 14/F, Wing Sing Commercial Bldg.
12 Wing Lok Street, Sheung Wan
Hong Kong

3596 7575  PHONE
3585 5118  FAX

-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux