Switched to the new generic PCI PM (Power Management)
framework. Also, removed unnecessary calls to the
PCI Helper functions (such as pci_set_power_state(),
pci_enable_wake(), pci_save_state(), pci_restore_state()
etc).
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 22f1a06..f1a6448 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5094,22 +5094,21 @@ static void mpi3mr_shutdown(struct pci_dev *pdev)
mpi3mr_cleanup_resources(mrioc);
}
-#ifdef CONFIG_PM
/**
* mpi3mr_suspend - PCI power management suspend callback
- * @pdev: PCI device instance
- * @state: New power state
+ * @dev: Device struct
*
* Change the power state to the given value and cleanup the IOC
* by issuing MUR and shutdown notification
*
* Return: 0 always.
*/
-static int mpi3mr_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused
+mpi3mr_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct mpi3mr_ioc *mrioc;
- pci_power_t device_state;
if (!shost)
return 0;
@@ -5123,27 +5122,26 @@ static int mpi3mr_suspend(struct pci_dev *pdev, pm_message_t state)
mpi3mr_stop_watchdog(mrioc);
mpi3mr_cleanup_ioc(mrioc);
- device_state = pci_choose_state(pdev, state);
- ioc_info(mrioc, "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
- pdev, pci_name(pdev), device_state);
- pci_save_state(pdev);
+ ioc_info(mrioc, "pdev=0x%p, slot=%s, entering operating state\n",
+ pdev, pci_name(pdev));
mpi3mr_cleanup_resources(mrioc);
- pci_set_power_state(pdev, device_state);
return 0;
}
/**
* mpi3mr_resume - PCI power management resume callback
- * @pdev: PCI device instance
+ * @dev: Device struct
*
* Restore the power state to D0 and reinitialize the controller
* and resume I/O operations to the target devices
*
* Return: 0 on success, non-zero on failure
*/
-static int mpi3mr_resume(struct pci_dev *pdev)
+static int __maybe_unused
+mpi3mr_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct mpi3mr_ioc *mrioc;
pci_power_t device_state = pdev->current_state;
@@ -5156,9 +5154,6 @@ static int mpi3mr_resume(struct pci_dev *pdev)
ioc_info(mrioc, "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
pdev, pci_name(pdev), device_state);
- pci_set_power_state(pdev, PCI_D0);
- pci_enable_wake(pdev, PCI_D0, 0);
- pci_restore_state(pdev);
mrioc->pdev = pdev;
mrioc->cpu_count = num_online_cpus();
r = mpi3mr_setup_resources(mrioc);
@@ -5180,7 +5175,6 @@ static int mpi3mr_resume(struct pci_dev *pdev)
return 0;
}
-#endif
static const struct pci_device_id mpi3mr_pci_id_table[] = {
{
@@ -5191,16 +5185,15 @@ static const struct pci_device_id mpi3mr_pci_id_table[] = {
};
MODULE_DEVICE_TABLE(pci, mpi3mr_pci_id_table);
+static SIMPLE_DEV_PM_OPS(mpi3mr_pm_ops, mpi3mr_suspend, mpi3mr_resume);
+
static struct pci_driver mpi3mr_pci_driver = {
.name = MPI3MR_DRIVER_NAME,
.id_table = mpi3mr_pci_id_table,
.probe = mpi3mr_probe,
.remove = mpi3mr_remove,
.shutdown = mpi3mr_shutdown,
-#ifdef CONFIG_PM
- .suspend = mpi3mr_suspend,
- .resume = mpi3mr_resume,
-#endif
+ .driver.pm = &mpi3mr_pm_ops,
};
static ssize_t event_counter_show(struct device_driver *dd, char *buf)
--
2.27.0
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
