libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC
response.
This patch adds support of dynamic usage bits for each opcode.
Set support of DPO & FUA bits in usage_bits of RSOC response depending
on support DPOFUA in the backstore device.
Reviewed-by: Roman Bolshakov <r.bolshakov@xxxxxxxxx>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@xxxxxxxxx>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@xxxxxxxxx>
---
drivers/target/target_core_spc.c | 34 +++++++++++++++++++++++++++++--
include/target/target_core_base.h | 2 ++
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 828251163cf0..a97a2f43a061 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -1308,6 +1308,22 @@ spc_emulate_testunitready(struct se_cmd *cmd)
return 0;
}
+static void set_dpofua_usage_bits(u8 *usage_bits, struct se_device *dev)
+{
+ if (!target_check_fua(dev))
+ usage_bits[1] &= ~0x18;
+ else
+ usage_bits[1] |= 0x18;
+}
+
+static void set_dpofua_usage_bits32(u8 *usage_bits, struct se_device *dev)
+{
+ if (!target_check_fua(dev))
+ usage_bits[10] &= ~0x18;
+ else
+ usage_bits[10] |= 0x18;
+}
+
static struct target_opcode_descriptor tcm_opcode_read6 = {
.support = SCSI_SUPPORT_FULL,
.opcode = READ_6,
@@ -1323,6 +1339,7 @@ static struct target_opcode_descriptor tcm_opcode_read10 = {
.usage_bits = {READ_10, 0xf8, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff,
0xff, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_read12 = {
@@ -1332,6 +1349,7 @@ static struct target_opcode_descriptor tcm_opcode_read12 = {
.usage_bits = {READ_12, 0xf8, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_read16 = {
@@ -1342,6 +1360,7 @@ static struct target_opcode_descriptor tcm_opcode_read16 = {
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_write6 = {
@@ -1359,6 +1378,7 @@ static struct target_opcode_descriptor tcm_opcode_write10 = {
.usage_bits = {WRITE_10, 0xf8, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff,
0xff, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_write_verify10 = {
@@ -1368,6 +1388,7 @@ static struct target_opcode_descriptor tcm_opcode_write_verify10 = {
.usage_bits = {WRITE_VERIFY, 0xf0, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, 0xff,
0xff, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_write12 = {
@@ -1377,6 +1398,7 @@ static struct target_opcode_descriptor tcm_opcode_write12 = {
.usage_bits = {WRITE_12, 0xf8, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_write16 = {
@@ -1387,6 +1409,7 @@ static struct target_opcode_descriptor tcm_opcode_write16 = {
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_write_verify16 = {
@@ -1397,6 +1420,7 @@ static struct target_opcode_descriptor tcm_opcode_write_verify16 = {
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff,
0xff, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
+ .update_usage_bits = set_dpofua_usage_bits,
};
static bool tcm_is_ws_enabled(struct se_cmd *cmd)
@@ -1423,6 +1447,7 @@ static struct target_opcode_descriptor tcm_opcode_write_same32 = {
0x00, 0x00, 0x00, 0x00,
0xff, 0xff, 0xff, 0xff},
.enabled = tcm_is_ws_enabled,
+ .update_usage_bits = set_dpofua_usage_bits32,
};
static bool tcm_is_caw_enabled(struct se_cmd *cmd)
@@ -1441,6 +1466,7 @@ static struct target_opcode_descriptor tcm_opcode_compare_write = {
0xff, 0xff, 0x00, 0x00,
0x00, 0xff, SCSI_GROUP_NUMBER_MASK, SCSI_CONTROL_MASK},
.enabled = tcm_is_caw_enabled,
+ .update_usage_bits = set_dpofua_usage_bits,
};
static struct target_opcode_descriptor tcm_opcode_read_capacity = {
@@ -2027,7 +2053,8 @@ spc_rsoc_encode_command_descriptor(unsigned char *buf, u8 ctdp,
static int
spc_rsoc_encode_one_command_descriptor(unsigned char *buf, u8 ctdp,
- struct target_opcode_descriptor *descr)
+ struct target_opcode_descriptor *descr,
+ struct se_device *dev)
{
int td_size = 0;
@@ -2039,6 +2066,8 @@ spc_rsoc_encode_one_command_descriptor(unsigned char *buf, u8 ctdp,
buf[1] = (ctdp << 7) | SCSI_SUPPORT_FULL;
put_unaligned_be16(descr->cdb_size, &buf[2]);
memcpy(&buf[4], descr->usage_bits, descr->cdb_size);
+ if (descr->update_usage_bits)
+ descr->update_usage_bits(&buf[4], dev);
td_size = spc_rsoc_encode_command_timeouts_descriptor(
&buf[4 + descr->cdb_size], ctdp, descr);
@@ -2181,7 +2210,8 @@ spc_emulate_report_supp_op_codes(struct se_cmd *cmd)
put_unaligned_be32(response_length - 3, buf);
} else {
response_length = spc_rsoc_encode_one_command_descriptor(
- &buf[response_length], rctd, descr);
+ &buf[response_length], rctd, descr,
+ cmd->se_dev);
}
memcpy(rbuf, buf, min_t(u32, response_length, cmd->data_length));
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 062ee8b6c433..0c1e43980985 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -880,6 +880,8 @@ struct target_opcode_descriptor {
u16 nominal_timeout;
u16 recommended_timeout;
bool (*enabled)(struct se_cmd *cmd);
+ void (*update_usage_bits)(u8 *usage_bits,
+ struct se_device *dev);
u8 usage_bits[];
};
--
2.25.1
