On Tue, 17 Jul 2007, Matthew Wilcox wrote:
On Mon, Jul 16, 2007 at 02:28:15PM -0600, Matthew Wilcox wrote:
I have to run, but here's what I've benn working on today if anyone
wants to test:
http://git.kernel.org/pub/scm/linux/kernel/git/willy/advansys-2.6.git
I was in so much of a hurry that I got the URL wrong. It is:
http://git.kernel.org/?p=linux/kernel/git/willy/advansys.git;a=summary
I've posted the four patches that this git contains.
I don't have an advansys card of my own, so I'm looking for testers.
It compiles cleanly, but that's about the best I can say about it.
I'm looking to do some more work on it today, including fixing the
dreadful job somebody did of removing the check_region calls. It'd be
helpful to know that this much works (and if it doesn't, at which point
in the patch series it stops working).
I don't use git, but I extracted the 4 patches out from the website. 3 of
the 4 had failed hunks against my gentoo kernel so I tried stock 2.6.22
and still had the same hunks fail.
Instead, I pulled the raw advansys.c from the tree provided and dropped
that in place.
here's the build:
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
CC drivers/scsi/advansys.o
drivers/scsi/advansys.c:795:2: warning: #warning this driver is still not
properly converted to the DMA API
LD drivers/scsi/built-in.o
LD drivers/built-in.o
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
MODPOST vmlinux
WARNING: drivers/built-in.o(.text+0x99045): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x9910b): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x994bd): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x99ced): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x99d69): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x99ded): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x99e11): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
WARNING: drivers/built-in.o(.text+0x99e21): Section mismatch: reference to
.init.text: (between 'advansys_board_found' and 'advansys_pci_probe')
AS arch/i386/boot/setup.o
LD arch/i386/boot/setup
OBJCOPY arch/i386/boot/compressed/vmlinux.bin
GZIP arch/i386/boot/compressed/vmlinux.bin.gz
LD arch/i386/boot/compressed/piggy.o
LD arch/i386/boot/compressed/vmlinux
OBJCOPY arch/i386/boot/vmlinux.bin
BUILD arch/i386/boot/bzImage
Root device is (22, 8)
Boot sector 512 bytes.
Setup is 6784 bytes.
System is 2412 kB
Kernel: arch/i386/boot/bzImage is ready (#2)
Building modules, stage 2.
MODPOST 96 modules
I've attached my regular dmesg as well as my dmesg with the failure of the
updated advansys driver.
I'd be glad to attempt the patches again. It would be easier for me if you
sent me the raw patches, if possible.[ 0.000000] Linux version 2.6.22-gentoo-r1 (root@death) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP PREEMPT Fri Jul 13 17:10:52 EDT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7510
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F74B0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FFFD51D, 002C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FFFFB2E, 0074 (r1 TYAN GUINNESS 6040000 PTEC F4240)
[ 0.000000] ACPI: DSDT 1FFFD549, 25E5 (r1 AMD AMDACPI 6040000 MSFT 100000B)
[ 0.000000] ACPI: FACS 1FFFFFC0, 0040
[ 0.000000] ACPI: APIC 1FFFFBA2, 005E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line: BOOT_IMAGE=gentoo ro root=1608
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1533.426 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 514060k/524224k available (3381k kernel code, 9696k reserved, 1148k data, 272k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc0574000 - 0xc05b8000 ( 272 kB)
[ 0.000000] .data : 0xc044d671 - 0xc056c7dc (1148 kB)
[ 0.000000] .text : 0xc0100000 - 0xc044d671 (3381 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.084000] Calibrating delay using timer specific routine.. 3069.21 BogoMIPS (lpj=6138423)
[ 0.084000] Mount-cache hash table entries: 512
[ 0.084000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[ 0.084000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.084000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[ 0.084000] Intel machine check architecture supported.
[ 0.084000] Intel machine check reporting enabled on CPU#0.
[ 0.084000] Compat vDSO mapped to ffffe000.
[ 0.084000] Checking 'hlt' instruction... OK.
[ 0.100000] Freeing SMP alternatives: 13k freed
[ 0.100000] ACPI: Core revision 20070126
[ 0.100000] CPU0: AMD Athlon(tm) MP 1800+ stepping 02
[ 0.100000] Booting processor 1/0 eip 2000
[ 0.112000] Initializing CPU#1
[ 0.192000] Calibrating delay using timer specific routine.. 3067.08 BogoMIPS (lpj=6134179)
[ 0.192000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[ 0.192000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.192000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.192000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[ 0.192000] Intel machine check architecture supported.
[ 0.192000] Intel machine check reporting enabled on CPU#1.
[ 0.192000] CPU1: AMD Athlon(tm) Processor stepping 02
[ 0.192000] Total of 2 processors activated (6136.30 BogoMIPS).
[ 0.192000] ENABLING IO-APIC IRQs
[ 0.192000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.232000] Brought up 2 CPUs
[ 0.284000] migration_cost=4000
[ 0.284000] NET: Registered protocol family 16
[ 0.284000] ACPI: bus type pci registered
[ 0.288000] PCI: PCI BIOS revision 2.10 entry at 0xfd7e0, last bus=1
[ 0.288000] PCI: Using configuration type 1
[ 0.288000] Setting up standard PCI resources
[ 0.292000] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.292000] mtrr: probably your BIOS does not setup all CPUs.
[ 0.292000] mtrr: corrected configuration.
[ 0.296000] ACPI: Interpreter enabled
[ 0.296000] ACPI: Using IOAPIC for interrupt routing
[ 0.300000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.300000] PCI: Probing PCI hardware (bus 00)
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.304000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *0, disabled.
[ 0.304000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
[ 0.304000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11)
[ 0.304000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
[ 0.304000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.304000] pnp: PnP ACPI init
[ 0.304000] ACPI: bus type pnp registered
[ 0.308000] pnp: PnP ACPI: found 13 devices
[ 0.308000] ACPI: ACPI bus type pnp unregistered
[ 0.308000] SCSI subsystem initialized
[ 0.308000] libata version 2.21 loaded.
[ 0.308000] usbcore: registered new interface driver usbfs
[ 0.308000] usbcore: registered new interface driver hub
[ 0.308000] usbcore: registered new device driver usb
[ 0.308000] PCI: Using ACPI for IRQ routing
[ 0.308000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.312000] pnp: 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.312000] pnp: 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.312000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.312000] pnp: 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.312000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.340000] PCI: Bridge: 0000:00:01.0
[ 0.340000] IO window: disabled.
[ 0.340000] MEM window: f1000000-f1ffffff
[ 0.340000] PREFETCH window: f8000000-fc0fffff
[ 0.340000] NET: Registered protocol family 2
[ 0.344000] Time: acpi_pm clocksource has been installed.
[ 0.376000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.376000] TCP established hash table entries: 16384 (order: 6, 458752 bytes)
[ 0.376000] TCP bind hash table entries: 16384 (order: 6, 393216 bytes)
[ 0.376000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.376000] TCP reno registered
[ 0.388000] Machine check exception polling timer started.
[ 0.388000] VFS: Disk quotas dquot_6.5.1
[ 0.388000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.388000] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.388000] io scheduler noop registered
[ 0.388000] io scheduler anticipatory registered (default)
[ 0.388000] io scheduler deadline registered
[ 0.388000] io scheduler cfq registered
[ 0.388000] BIOS failed to enable PCI standards compliance, fixing this error.
[ 0.388000] I/O APIC: AMD Erratum #22 may be present. In the event of instability try
[ 0.388000] : booting with the "noapic" option.
[ 0.408000] Boot video device is 0000:01:05.0
[ 0.472000] lp: driver loaded but no devices found
[ 0.472000] Real Time Clock Driver v1.12ac
[ 0.472000] Linux agpgart interface v0.102 (c) Dave Jones
[ 0.472000] input: Power Button (FF) as /class/input/input0
[ 0.472000] ACPI: Power Button (FF) [PWRF]
[ 0.472000] input: Sleep Button (FF) as /class/input/input1
[ 0.472000] ACPI: Sleep Button (FF) [SLPF]
[ 0.472000] input: Power Button (CM) as /class/input/input2
[ 0.472000] ACPI: Power Button (CM) [PWRB]
[ 0.472000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 0.472000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.476000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.476000] parport_pc 00:09: reported by Plug and Play ACPI
[ 0.476000] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 0.572000] lp0: using parport0 (interrupt-driven).
[ 0.572000] lp0: console ready
[ 0.572000] Floppy drive(s): fd0 is 1.44M
[ 0.588000] FDC 0 is a post-1991 82077
[ 0.592000] loop: module loaded
[ 0.592000] 8139too Fast Ethernet driver 0.9.28
[ 0.592000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 0.592000] eth0: RealTek RTL8139 at 0x1400, 00:50:ba:ae:3d:8a, IRQ 16
[ 0.592000] eth0: Identified 8139 chip type 'RTL-8139C'
[ 0.592000] netconsole: not configured, aborting
[ 0.592000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.592000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.592000] AMD7411: IDE controller at PCI slot 0000:00:07.1
[ 0.592000] AMD7411: chipset revision 1
[ 0.592000] AMD7411: not 100% native mode: will probe irqs later
[ 0.592000] AMD7411: 0000:00:07.1 (rev 01) UDMA100 controller
[ 0.592000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[ 0.592000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 0.592000] Probing IDE interface ide0...
[ 1.332000] hda: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
[ 2.004000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.004000] Probing IDE interface ide1...
[ 2.292000] hdc: ST3160023A, ATA DISK drive
[ 2.572000] hdd: ST3200822A, ATA DISK drive
[ 2.628000] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.628000] hdc: max request size: 512KiB
[ 2.628000] hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 2.628000] hdc: cache flushes supported
[ 2.628000] hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 >
[ 2.708000] hdd: max request size: 512KiB
[ 2.708000] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[ 2.708000] hdd: cache flushes supported
[ 2.708000] hdd: hdd1 hdd2 hdd4 < hdd5 hdd6 hdd7 hdd8 >
[ 2.768000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 2.768000] Uniform CD-ROM driver Revision: 3.20
[ 2.772000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 6.036000] scsi0 : AdvanSys SCSI 3.3K: PCI Ultra: IO 0x1800-0x180F, IRQ 0x10
[ 6.040000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 7.092000] scsi 0:0:5:0: Direct-Access SEAGATE SX410800N 7117 PQ: 0 ANSI: 2
[ 11.252000] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 11.252000] <Adaptec 2940 Ultra2 SCSI adapter>
[ 11.252000] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 11.252000]
[ 11.252000] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 11.256000] sd 0:0:5:0: [sda] 17096357 512-byte hardware sectors (8753 MB)
[ 11.260000] sd 0:0:5:0: [sda] Write Protect is off
[ 11.260000] scsi 1:0:0:0: Direct-Access IBM DNES-309170 SAH0 PQ: 0 ANSI: 3
[ 11.260000] scsi1:A:0:0: Tagged Queuing enabled. Depth 32
[ 11.260000] target1:0:0: Beginning Domain Validation
[ 11.260000] sd 0:0:5:0: [sda] Mode Sense: b9 00 10 08
[ 11.264000] sd 0:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 11.268000] sd 0:0:5:0: [sda] 17096357 512-byte hardware sectors (8753 MB)
[ 11.272000] sd 0:0:5:0: [sda] Write Protect is off
[ 11.272000] sd 0:0:5:0: [sda] Mode Sense: b9 00 10 08
[ 11.276000] sd 0:0:5:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 11.276000] sda:(scsi1:A:0:0): refuses WIDE negotiation. Using 8bit transfers
[ 11.296000] sda1 sda4 <<6> target1:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 31)
[ 11.316000] sda5 >
[ 11.316000] sd 0:0:5:0: [sda] Attached SCSI disk
[ 11.316000] sd 0:0:5:0: Attached scsi generic sg0 type 0
[ 11.316000] usbmon: debugfs is not available
[ 11.316000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.316000] ACPI: PCI Interrupt 0000:00:07.4[D] -> GSI 19 (level, low) -> IRQ 18
[ 11.316000] ohci_hcd 0000:00:07.4: OHCI Host Controller
[ 11.316000] ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
[ 11.316000] ohci_hcd 0000:00:07.4: irq 18, io mem 0x000dc000
[ 11.320000] target1:0:0: Domain Validation skipping write tests
[ 11.320000] target1:0:0: Ending Domain Validation
[ 11.372000] usb usb1: configuration #1 chosen from 1 choice
[ 11.372000] hub 1-0:1.0: USB hub found
[ 11.372000] hub 1-0:1.0: 4 ports detected
[ 11.612000] scsi 1:0:2:0: CD-ROM TEAC CD-W512SB 1.0C PQ: 0 ANSI: 2
[ 11.612000] target1:0:2: Beginning Domain Validation
[ 11.620000] target1:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 8)
[ 11.624000] target1:0:2: Domain Validation skipping write tests
[ 11.624000] target1:0:2: Ending Domain Validation
[ 11.732000] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 11.888000] usb 1-1: configuration #1 chosen from 1 choice
[ 11.888000] hub 1-1:1.0: USB hub found
[ 11.892000] hub 1-1:1.0: 4 ports detected
[ 12.272000] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 12.432000] usb 1-2: configuration #1 chosen from 1 choice
[ 12.440000] hub 1-2:1.0: USB hub found
[ 12.440000] hub 1-2:1.0: 4 ports detected
[ 12.776000] usb 1-1.1: new full speed USB device using ohci_hcd and address 4
[ 12.892000] usb 1-1.1: configuration #1 chosen from 1 choice
[ 13.108000] usb 1-1.3: new full speed USB device using ohci_hcd and address 5
[ 13.220000] usb 1-1.3: configuration #1 chosen from 1 choice
[ 13.432000] usb 1-1.4: new low speed USB device using ohci_hcd and address 6
[ 13.544000] usb 1-1.4: configuration #1 chosen from 1 choice
[ 13.764000] usb 1-2.3: new full speed USB device using ohci_hcd and address 7
[ 13.876000] usb 1-2.3: configuration #1 chosen from 1 choice
[ 13.888000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
[ 13.888000] usbcore: registered new interface driver usblp
[ 13.888000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 13.888000] Initializing USB Mass Storage driver...
[ 13.888000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 13.888000] usb-storage: device found at 4
[ 13.888000] usb-storage: waiting for device to settle before scanning
[ 13.888000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 13.888000] usb-storage: device found at 5
[ 13.888000] usb-storage: waiting for device to settle before scanning
[ 13.888000] usbcore: registered new interface driver usb-storage
[ 13.888000] USB Mass Storage support registered.
[ 13.888000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.892000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.892000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.892000] mice: PS/2 mouse device common for all mice
[ 13.916000] input: AT Translated Set 2 keyboard as /class/input/input3
[ 13.920000] input: PC Speaker as /class/input/input4
[ 14.664000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
[ 14.668000] EDAC MC: Ver: 2.0.1 Jul 13 2007
[ 14.668000] EDAC MC0: Giving out device to amd76x_edac AMD762: DEV 0000:00:00.0
[ 14.668000] usbcore: registered new interface driver hiddev
[ 14.680000] input: Logitech WingMan Action Pad as /class/input/input6
[ 14.680000] input: USB HID v1.10 Joystick [Logitech WingMan Action Pad] on usb-0000:00:07.4-1.4
[ 14.680000] usbcore: registered new interface driver usbhid
[ 14.680000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 14.680000] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 14.680000] no UART detected at 0x1
[ 14.684000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 14.704000] sd 1:0:0:0: [sdb] 17916240 512-byte hardware sectors (9173 MB)
[ 14.712000] ALSA device list:
[ 14.712000] #0: SB Live 5.1 (rev.10, serial:0x80641102) at 0x1840, irq 18
[ 14.712000] Netfilter messages via NETLINK v0.30.
[ 14.712000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.712000] TCP cubic registered
[ 14.712000] NET: Registered protocol family 1
[ 14.712000] NET: Registered protocol family 17
[ 14.712000] Starting balanced_irq
[ 14.712000] Using IPI Shortcut mode
[ 14.712000] scsi: waiting for bus probes to complete ...
[ 14.752000] sd 1:0:0:0: [sdb] Write Protect is off
[ 14.752000] sd 1:0:0:0: [sdb] Mode Sense: c3 00 00 08
[ 14.784000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.812000] sd 1:0:0:0: [sdb] 17916240 512-byte hardware sectors (9173 MB)
[ 14.860000] sd 1:0:0:0: [sdb] Write Protect is off
[ 14.860000] sd 1:0:0:0: [sdb] Mode Sense: c3 00 00 08
[ 14.892000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 14.892000] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 >
[ 14.928000] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 14.928000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 14.968000] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 14.968000] sr 1:0:2:0: Attached scsi CD-ROM sr0
[ 14.968000] sr 1:0:2:0: Attached scsi generic sg2 type 5
[ 14.984000] kjournald starting. Commit interval 5 seconds
[ 14.984000] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.984000] VFS: Mounted root (ext3 filesystem) readonly.
[ 14.984000] Freeing unused kernel memory: 272k freed
[ 17.720000] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0x1878, speed 59659kHz
[ 18.152000] nvidia: module license 'NVIDIA' taints kernel.
[ 18.156000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 18.156000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[ 18.408000] NVRM: PAT index 1 already configured for Write-Combining!
[ 18.408000] NVRM: Aborting, due to PAT already being configured
[ 18.892000] usb-storage: device scan complete
[ 18.892000] usb-storage: device scan complete
[ 18.900000] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 2.00 PQ: 0 ANSI: 0
[ 18.900000] scsi 2:0:0:0: Direct-Access SanDisk ImageMate II 1.30 PQ: 0 ANSI: 2
[ 18.912000] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 18.912000] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 18.940000] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 18.940000] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 19.420000] EXT3 FS on hdc8, internal journal
[ 141.828000] kjournald starting. Commit interval 5 seconds
[ 141.828000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 141.832000] EXT3 FS on sdb1, internal journal
[ 141.832000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.844000] kjournald starting. Commit interval 5 seconds
[ 141.844000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 141.844000] EXT3 FS on hdc6, internal journal
[ 141.844000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.856000] kjournald starting. Commit interval 5 seconds
[ 141.884000] EXT3 FS on sda1, internal journal
[ 141.884000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.904000] kjournald starting. Commit interval 5 seconds
[ 141.904000] EXT3 FS on hdc1, internal journal
[ 141.904000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.920000] kjournald starting. Commit interval 5 seconds
[ 141.920000] EXT3 FS on hdc5, internal journal
[ 141.920000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.948000] kjournald starting. Commit interval 5 seconds
[ 141.948000] EXT3 FS on hdd6, internal journal
[ 141.948000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.964000] kjournald starting. Commit interval 5 seconds
[ 141.964000] EXT3 FS on hdd5, internal journal
[ 141.964000] EXT3-fs: mounted filesystem with ordered data mode.
[ 141.992000] kjournald starting. Commit interval 5 seconds
[ 141.992000] EXT3 FS on hdd8, internal journal
[ 141.992000] EXT3-fs: mounted filesystem with ordered data mode.
[ 142.136000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 142.276000] Adding 2008084k swap on /dev/hdc9. Priority:-1 extents:1 across:2008084k
[ 0.000000] Linux version 2.6.22-gentoo-r1 (root@death) (gcc version 4.1.2 (Gentoo 4.1.2)) #2 SMP PREEMPT Tue Jul 17 11:03:47 EDT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffffc00 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7510
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F74B0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FFFD51D, 002C (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FFFFB2E, 0074 (r1 TYAN GUINNESS 6040000 PTEC F4240)
[ 0.000000] ACPI: DSDT 1FFFD549, 25E5 (r1 AMD AMDACPI 6040000 MSFT 100000B)
[ 0.000000] ACPI: FACS 1FFFFFC0, 0040
[ 0.000000] ACPI: APIC 1FFFFBA2, 005E (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Built 1 zonelists. Total pages: 130033
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=1608
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1533.426 MHz processor.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 514068k/524224k available (3386k kernel code, 9688k reserved, 1147k data, 264k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc0574000 - 0xc05b6000 ( 264 kB)
[ 0.000000] .data : 0xc044ea41 - 0xc056d7dc (1147 kB)
[ 0.000000] .text : 0xc0100000 - 0xc044ea41 (3386 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.084000] Calibrating delay using timer specific routine.. 3069.20 BogoMIPS (lpj=6138404)
[ 0.084000] Mount-cache hash table entries: 512
[ 0.084000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[ 0.084000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.084000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[ 0.084000] Intel machine check architecture supported.
[ 0.084000] Intel machine check reporting enabled on CPU#0.
[ 0.084000] Compat vDSO mapped to ffffe000.
[ 0.084000] Checking 'hlt' instruction... OK.
[ 0.100000] Freeing SMP alternatives: 13k freed
[ 0.100000] ACPI: Core revision 20070126
[ 0.100000] CPU0: AMD Athlon(tm) MP 1800+ stepping 02
[ 0.100000] Booting processor 1/0 eip 2000
[ 0.112000] Initializing CPU#1
[ 0.192000] Calibrating delay using timer specific routine.. 3067.08 BogoMIPS (lpj=6134178)
[ 0.192000] CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
[ 0.192000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.192000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.192000] CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
[ 0.192000] Intel machine check architecture supported.
[ 0.192000] Intel machine check reporting enabled on CPU#1.
[ 0.192000] CPU1: AMD Athlon(tm) Processor stepping 02
[ 0.192000] Total of 2 processors activated (6136.29 BogoMIPS).
[ 0.192000] ENABLING IO-APIC IRQs
[ 0.192000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.232000] Brought up 2 CPUs
[ 0.276000] migration_cost=4000
[ 0.276000] NET: Registered protocol family 16
[ 0.276000] ACPI: bus type pci registered
[ 0.276000] PCI: PCI BIOS revision 2.10 entry at 0xfd7e0, last bus=1
[ 0.276000] PCI: Using configuration type 1
[ 0.276000] Setting up standard PCI resources
[ 0.280000] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.284000] mtrr: probably your BIOS does not setup all CPUs.
[ 0.284000] mtrr: corrected configuration.
[ 0.288000] ACPI: Interpreter enabled
[ 0.288000] ACPI: Using IOAPIC for interrupt routing
[ 0.292000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.292000] PCI: Probing PCI hardware (bus 00)
[ 0.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.292000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.292000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 11) *0, disabled.
[ 0.292000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
[ 0.292000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11)
[ 0.296000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
[ 0.296000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.296000] pnp: PnP ACPI init
[ 0.296000] ACPI: bus type pnp registered
[ 0.300000] pnp: PnP ACPI: found 13 devices
[ 0.300000] ACPI: ACPI bus type pnp unregistered
[ 0.300000] SCSI subsystem initialized
[ 0.300000] libata version 2.21 loaded.
[ 0.300000] usbcore: registered new interface driver usbfs
[ 0.300000] usbcore: registered new interface driver hub
[ 0.300000] usbcore: registered new device driver usb
[ 0.300000] PCI: Using ACPI for IRQ routing
[ 0.300000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.300000] pnp: 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.300000] pnp: 00:00: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.300000] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.300000] pnp: 00:00: iomem range 0x100000-0x1fffffff could not be reserved
[ 0.300000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.332000] PCI: Bridge: 0000:00:01.0
[ 0.332000] IO window: disabled.
[ 0.332000] MEM window: f1000000-f1ffffff
[ 0.332000] PREFETCH window: f8000000-fc0fffff
[ 0.332000] NET: Registered protocol family 2
[ 0.336000] Time: acpi_pm clocksource has been installed.
[ 0.368000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.368000] TCP established hash table entries: 16384 (order: 6, 458752 bytes)
[ 0.368000] TCP bind hash table entries: 16384 (order: 6, 393216 bytes)
[ 0.368000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.368000] TCP reno registered
[ 0.380000] Machine check exception polling timer started.
[ 0.380000] VFS: Disk quotas dquot_6.5.1
[ 0.380000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.380000] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 0.380000] io scheduler noop registered
[ 0.380000] io scheduler anticipatory registered (default)
[ 0.380000] io scheduler deadline registered
[ 0.380000] io scheduler cfq registered
[ 0.380000] BIOS failed to enable PCI standards compliance, fixing this error.
[ 0.380000] I/O APIC: AMD Erratum #22 may be present. In the event of instability try
[ 0.380000] : booting with the "noapic" option.
[ 0.400000] Boot video device is 0000:01:05.0
[ 0.464000] lp: driver loaded but no devices found
[ 0.464000] Real Time Clock Driver v1.12ac
[ 0.464000] Linux agpgart interface v0.102 (c) Dave Jones
[ 0.464000] input: Power Button (FF) as /class/input/input0
[ 0.464000] ACPI: Power Button (FF) [PWRF]
[ 0.464000] input: Sleep Button (FF) as /class/input/input1
[ 0.464000] ACPI: Sleep Button (FF) [SLPF]
[ 0.464000] input: Power Button (CM) as /class/input/input2
[ 0.464000] ACPI: Power Button (CM) [PWRB]
[ 0.464000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 0.468000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.468000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.468000] parport_pc 00:09: reported by Plug and Play ACPI
[ 0.468000] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 0.564000] lp0: using parport0 (interrupt-driven).
[ 0.564000] lp0: console ready
[ 0.564000] Floppy drive(s): fd0 is 1.44M
[ 0.580000] FDC 0 is a post-1991 82077
[ 0.584000] loop: module loaded
[ 0.584000] 8139too Fast Ethernet driver 0.9.28
[ 0.584000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 0.584000] eth0: RealTek RTL8139 at 0x1400, 00:50:ba:ae:3d:8a, IRQ 16
[ 0.584000] eth0: Identified 8139 chip type 'RTL-8139C'
[ 0.584000] netconsole: not configured, aborting
[ 0.584000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.584000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.584000] AMD7411: IDE controller at PCI slot 0000:00:07.1
[ 0.584000] AMD7411: chipset revision 1
[ 0.584000] AMD7411: not 100% native mode: will probe irqs later
[ 0.584000] AMD7411: 0000:00:07.1 (rev 01) UDMA100 controller
[ 0.584000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[ 0.584000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
[ 0.584000] Probing IDE interface ide0...
[ 1.320000] hda: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
[ 1.992000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.992000] Probing IDE interface ide1...
[ 2.280000] hdc: ST3160023A, ATA DISK drive
[ 2.560000] hdd: ST3200822A, ATA DISK drive
[ 2.616000] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.616000] hdc: max request size: 512KiB
[ 2.616000] hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 2.616000] hdc: cache flushes supported
[ 2.616000] hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 >
[ 2.708000] hdd: max request size: 512KiB
[ 2.708000] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
[ 2.708000] hdd: cache flushes supported
[ 2.708000] hdd: hdd1 hdd2 hdd4 < hdd5 hdd6 hdd7 hdd8 >
[ 2.764000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 2.764000] Uniform CD-ROM driver Revision: 3.20
[ 6.032000] scsi0 : AdvanSys SCSI 3.3K: PCI Ultra: IO 0x1800-0x180F, IRQ 0x5
[ 6.032000] advansys: advansys_detect: unknown bus type: 4
[ 6.032000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 11.248000] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 11.248000] <Adaptec 2940 Ultra2 SCSI adapter>
[ 11.248000] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 11.248000]
[ 11.248000] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[ 11.248000] usbmon: debugfs is not available
[ 11.248000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.248000] ACPI: PCI Interrupt 0000:00:07.4[D] -> GSI 19 (level, low) -> IRQ 18
[ 11.248000] ohci_hcd 0000:00:07.4: OHCI Host Controller
[ 11.248000] ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
[ 11.248000] ohci_hcd 0000:00:07.4: irq 18, io mem 0x000dc000
[ 11.256000] scsi 1:0:0:0: Direct-Access IBM DNES-309170 SAH0 PQ: 0 ANSI: 3
[ 11.256000] scsi1:A:0:0: Tagged Queuing enabled. Depth 32
[ 11.256000] target1:0:0: Beginning Domain Validation
[ 11.292000] (scsi1:A:0:0): refuses WIDE negotiation. Using 8bit transfers
[ 11.292000] target1:0:0: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 31)
[ 11.304000] usb usb1: configuration #1 chosen from 1 choice
[ 11.304000] hub 1-0:1.0: USB hub found
[ 11.304000] hub 1-0:1.0: 4 ports detected
[ 11.316000] target1:0:0: Domain Validation skipping write tests
[ 11.316000] target1:0:0: Ending Domain Validation
[ 11.532000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 11.608000] scsi 1:0:2:0: CD-ROM TEAC CD-W512SB 1.0C PQ: 0 ANSI: 2
[ 11.608000] target1:0:2: Beginning Domain Validation
[ 11.616000] target1:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 8)
[ 11.620000] target1:0:2: Domain Validation skipping write tests
[ 11.620000] target1:0:2: Ending Domain Validation
[ 11.668000] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 11.824000] usb 1-1: configuration #1 chosen from 1 choice
[ 11.824000] hub 1-1:1.0: USB hub found
[ 11.828000] hub 1-1:1.0: 4 ports detected
[ 12.208000] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 12.368000] usb 1-2: configuration #1 chosen from 1 choice
[ 12.376000] hub 1-2:1.0: USB hub found
[ 12.376000] hub 1-2:1.0: 4 ports detected
[ 12.712000] usb 1-1.1: new full speed USB device using ohci_hcd and address 4
[ 12.828000] usb 1-1.1: configuration #1 chosen from 1 choice
[ 13.044000] usb 1-1.3: new full speed USB device using ohci_hcd and address 5
[ 13.156000] usb 1-1.3: configuration #1 chosen from 1 choice
[ 13.368000] usb 1-1.4: new low speed USB device using ohci_hcd and address 6
[ 13.480000] usb 1-1.4: configuration #1 chosen from 1 choice
[ 13.700000] usb 1-2.3: new full speed USB device using ohci_hcd and address 7
[ 13.812000] usb 1-2.3: configuration #1 chosen from 1 choice
[ 13.824000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
[ 13.824000] usbcore: registered new interface driver usblp
[ 13.824000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 13.824000] Initializing USB Mass Storage driver...
[ 13.824000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 13.824000] usb-storage: device found at 4
[ 13.824000] usb-storage: waiting for device to settle before scanning
[ 13.824000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 13.824000] usb-storage: device found at 5
[ 13.824000] usb-storage: waiting for device to settle before scanning
[ 13.824000] usbcore: registered new interface driver usb-storage
[ 13.824000] USB Mass Storage support registered.
[ 13.824000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.828000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.828000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.828000] mice: PS/2 mouse device common for all mice
[ 13.828000] input: PC Speaker as /class/input/input3
[ 13.828000] EDAC MC: Ver: 2.0.1 Jul 13 2007
[ 13.828000] EDAC MC0: Giving out device to amd76x_edac AMD762: DEV 0000:00:00.0
[ 13.828000] usbcore: registered new interface driver hiddev
[ 13.840000] input: Logitech WingMan Action Pad as /class/input/input4
[ 13.840000] input: USB HID v1.10 Joystick [Logitech WingMan Action Pad] on usb-0000:00:07.4-1.4
[ 13.840000] usbcore: registered new interface driver usbhid
[ 13.840000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 13.840000] Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
[ 13.840000] no UART detected at 0x1
[ 13.844000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 13.852000] input: AT Translated Set 2 keyboard as /class/input/input5
[ 13.872000] ALSA device list:
[ 13.872000] #0: SB Live 5.1 (rev.10, serial:0x80641102) at 0x1840, irq 18
[ 13.872000] Netfilter messages via NETLINK v0.30.
[ 13.872000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.872000] TCP cubic registered
[ 13.872000] NET: Registered protocol family 1
[ 13.872000] NET: Registered protocol family 17
[ 13.872000] Starting balanced_irq
[ 13.872000] Using IPI Shortcut mode
[ 13.872000] scsi: waiting for bus probes to complete ...
[ 14.604000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input6
[ 14.708000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 18.828000] usb-storage: device scan complete
[ 18.828000] usb-storage: device scan complete
[ 18.836000] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 2.00 PQ: 0 ANSI: 0
[ 18.836000] scsi 2:0:0:0: Direct-Access SanDisk ImageMate II 1.30 PQ: 0 ANSI: 2
[ 34.712000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 37.888000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 47.892000] scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery
[ 53.392000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 56.568000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 76.572000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 79.748000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 89.752000] scsi 0:0:1:0: scsi: Device offlined - not ready after error recovery
[ 95.252000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 98.428000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 118.432000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 121.608000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 131.612000] scsi 0:0:2:0: scsi: Device offlined - not ready after error recovery
[ 137.112000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 140.288000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 160.292000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 163.468000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 173.472000] scsi 0:0:3:0: scsi: Device offlined - not ready after error recovery
[ 178.972000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 182.148000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 202.152000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 205.328000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 215.332000] scsi 0:0:4:0: scsi: Device offlined - not ready after error recovery
[ 220.832000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 224.008000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 244.012000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 247.188000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 257.192000] scsi 0:0:5:0: scsi: Device offlined - not ready after error recovery
[ 262.692000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 265.868000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 285.872000] advansys: advansys_reset: board 0: SCSI bus reset started...
[ 289.048000] advansys: advansys_reset: board 0: SCSI bus reset successful.
[ 299.052000] scsi 0:0:6:0: scsi: Device offlined - not ready after error recovery
[ 299.052000] sd 1:0:0:0: [sda] 17916240 512-byte hardware sectors (9173 MB)
[ 299.092000] sd 1:0:0:0: [sda] Write Protect is off
[ 299.092000] sd 1:0:0:0: [sda] Mode Sense: c3 00 00 08
[ 299.128000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 299.152000] sd 1:0:0:0: [sda] 17916240 512-byte hardware sectors (9173 MB)
[ 299.200000] sd 1:0:0:0: [sda] Write Protect is off
[ 299.200000] sd 1:0:0:0: [sda] Mode Sense: c3 00 00 08
[ 299.232000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 299.232000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 299.268000] sd 1:0:0:0: [sda] Attached SCSI disk
[ 299.268000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 299.308000] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 299.308000] sr 1:0:2:0: Attached scsi CD-ROM sr0
[ 299.308000] sr 1:0:2:0: Attached scsi generic sg1 type 5
[ 299.320000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 299.320000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 299.332000] kjournald starting. Commit interval 5 seconds
[ 299.332000] EXT3-fs: mounted filesystem with ordered data mode.
[ 299.332000] VFS: Mounted root (ext3 filesystem) readonly.
[ 299.332000] Freeing unused kernel memory: 264k freed
[ 299.428000] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 299.428000] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 302.080000] gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0x1878, speed 59659kHz
[ 302.332000] nvidia: module license 'NVIDIA' taints kernel.
[ 302.352000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 302.352000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
[ 303.564000] EXT3 FS on hdc8, internal journal
[ 390.740000] kjournald starting. Commit interval 5 seconds
[ 390.740000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 390.740000] EXT3 FS on hdc6, internal journal
[ 390.740000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.772000] kjournald starting. Commit interval 5 seconds
[ 390.772000] EXT3 FS on hdc1, internal journal
[ 390.772000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.792000] kjournald starting. Commit interval 5 seconds
[ 390.792000] EXT3 FS on hdc5, internal journal
[ 390.792000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.816000] kjournald starting. Commit interval 5 seconds
[ 390.816000] EXT3 FS on hdd6, internal journal
[ 390.816000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.832000] kjournald starting. Commit interval 5 seconds
[ 390.832000] EXT3 FS on hdd5, internal journal
[ 390.832000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.860000] kjournald starting. Commit interval 5 seconds
[ 390.860000] EXT3 FS on hdd8, internal journal
[ 390.860000] EXT3-fs: mounted filesystem with ordered data mode.
[ 390.940000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 391.024000] Adding 2008084k swap on /dev/hdc9. Priority:-1 extents:1 across:2008084k
