> On Aug 4, 2022, at 6:12 AM, Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx> wrote:
>
> Added framework to register and unregister the
> host and expander phys with SCSI Transport Layer (STL).
>
> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
> ---
> drivers/scsi/mpi3mr/Makefile | 1 +
> drivers/scsi/mpi3mr/mpi3mr.h | 93 ++++++
> drivers/scsi/mpi3mr/mpi3mr_transport.c | 430 +++++++++++++++++++++++++
> 3 files changed, 524 insertions(+)
> create mode 100644 drivers/scsi/mpi3mr/mpi3mr_transport.c
>
> diff --git a/drivers/scsi/mpi3mr/Makefile b/drivers/scsi/mpi3mr/Makefile
> index f5cdbe4..ef86ca4 100644
> --- a/drivers/scsi/mpi3mr/Makefile
> +++ b/drivers/scsi/mpi3mr/Makefile
> @@ -3,3 +3,4 @@ obj-m += mpi3mr.o
> mpi3mr-y += mpi3mr_os.o \
> mpi3mr_fw.o \
> mpi3mr_app.o \
> + mpi3mr_transport.o
> diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
> index 542b462..006bc5d 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr.h
> +++ b/drivers/scsi/mpi3mr/mpi3mr.h
> @@ -39,6 +39,7 @@
> #include <scsi/scsi_host.h>
> #include <scsi/scsi_tcq.h>
> #include <uapi/scsi/scsi_bsg_mpi3mr.h>
> +#include <scsi/scsi_transport_sas.h>
>
> #include "mpi/mpi30_transport.h"
> #include "mpi/mpi30_cnfg.h"
> @@ -461,6 +462,98 @@ struct mpi3mr_throttle_group_info {
> atomic_t pend_large_data_sz;
> };
>
> +/* HBA port flags */
> +#define MPI3MR_HBA_PORT_FLAG_DIRTY 0x01
> +
> +/**
> + * struct mpi3mr_hba_port - HBA's port information
> + * @port_id: Port number
> + * @flags: HBA port flags
> + */
> +struct mpi3mr_hba_port {
> + struct list_head list;
> + u8 port_id;
> + u8 flags;
> +};
> +
> +/**
> + * struct mpi3mr_sas_port - Internal SAS port information
> + * @port_list: List of ports belonging to a SAS node
> + * @num_phys: Number of phys associated with port
> + * @hba_port: HBA port entry
> + * @remote_identify: Attached device identification
> + * @rphy: SAS transport layer rphy object
> + * @port: SAS transport layer port object
> + * @phy_list: mpi3mr_sas_phy objects belonging to this port
> + */
> +struct mpi3mr_sas_port {
> + struct list_head port_list;
> + u8 num_phys;
> + struct mpi3mr_hba_port *hba_port;
> + struct sas_identify remote_identify;
> + struct sas_rphy *rphy;
> + struct sas_port *port;
> + struct list_head phy_list;
> +};
> +
> +/**
> + * struct mpi3mr_sas_phy - Internal SAS Phy information
> + * @port_siblings: List of phys belonging to a port
> + * @identify: Phy identification
> + * @remote_identify: Attached device identification
> + * @phy: SAS transport layer Phy object
> + * @phy_id: Unique phy id within a port
> + * @handle: Firmware device handle for this phy
> + * @attached_handle: Firmware device handle for attached device
> + * @phy_belongs_to_port: Flag to indicate phy belongs to port
> + @hba_port: HBA port entry
> + */
> +struct mpi3mr_sas_phy {
> + struct list_head port_siblings;
> + struct sas_identify identify;
> + struct sas_identify remote_identify;
> + struct sas_phy *phy;
> + u8 phy_id;
> + u16 handle;
> + u16 attached_handle;
> + u8 phy_belongs_to_port;
> + struct mpi3mr_hba_port *hba_port;
> +};
> +
> +/**
> + * struct mpi3mr_sas_node - SAS host/expander information
> + * @list: List of sas nodes in a controller
> + * @parent_dev: Parent device class
> + * @num_phys: Number phys belonging to sas_node
> + * @sas_address: SAS address of sas_node
> + * @handle: Firmware device handle for this sas_host/expander
> + * @sas_address_parent: SAS address of parent expander or host
> + * @enclosure_handle: Firmware handle of enclosure of this node
> + * @device_info: Capabilities of this sas_host/expander
> + * @non_responding: used to refresh the expander devices during reset
> + * @host_node: Flag to indicate this is a host_node
> + * @hba_port: HBA port entry
> + * @phy: A list of phys that make up this sas_host/expander
> + * @sas_port_list: List of internal ports of this node
> + * @rphy: sas_rphy object of this expander node
> + */
> +struct mpi3mr_sas_node {
> + struct list_head list;
> + struct device *parent_dev;
> + u8 num_phys;
> + u64 sas_address;
> + u16 handle;
> + u64 sas_address_parent;
> + u16 enclosure_handle;
> + u64 enclosure_logical_id;
> + u8 non_responding;
> + u8 host_node;
> + struct mpi3mr_hba_port *hba_port;
> + struct mpi3mr_sas_phy *phy;
> + struct list_head sas_port_list;
> + struct sas_rphy *rphy;
> +};
> +
> /**
> * struct mpi3mr_enclosure_node - enclosure information
> * @list: List of enclosures
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
> new file mode 100644
> index 0000000..8c76bf5
> --- /dev/null
> +++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
> @@ -0,0 +1,430 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Driver for Broadcom MPI3 Storage Controllers
> + *
> + * Copyright (C) 2017-2022 Broadcom Inc.
> + * (mailto: mpi3mr-linuxdrv.pdl@xxxxxxxxxxxx)
> + *
> + */
> +
> +#include "mpi3mr.h"
> +
> +/**
> + * mpi3mr_convert_phy_link_rate -
> + * @link_rate: link rate as defined in the MPI header
> + *
> + * Convert link_rate from mpi format into sas_transport layer
> + * form.
> + *
> + * Return: A valid SAS transport layer defined link rate
> + */
> +static enum sas_linkrate mpi3mr_convert_phy_link_rate(u8 link_rate)
> +{
> + enum sas_linkrate rc;
> +
> + switch (link_rate) {
> + case MPI3_SAS_NEG_LINK_RATE_1_5:
> + rc = SAS_LINK_RATE_1_5_GBPS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_3_0:
> + rc = SAS_LINK_RATE_3_0_GBPS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_6_0:
> + rc = SAS_LINK_RATE_6_0_GBPS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_12_0:
> + rc = SAS_LINK_RATE_12_0_GBPS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_22_5:
> + rc = SAS_LINK_RATE_22_5_GBPS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED:
> + rc = SAS_PHY_DISABLED;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
> + rc = SAS_LINK_RATE_FAILED;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR:
> + rc = SAS_SATA_PORT_SELECTOR;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
> + rc = SAS_PHY_RESET_IN_PROGRESS;
> + break;
> + case MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
> + case MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
> + default:
> + rc = SAS_LINK_RATE_UNKNOWN;
> + break;
> + }
> + return rc;
> +}
> +
> +/**
> + * mpi3mr_delete_sas_phy - Remove a single phy from port
> + * @mrioc: Adapter instance reference
> + * @mr_sas_port: Internal Port object
> + * @mr_sas_phy: Internal Phy object
> + *
> + * Return: None.
> + */
> +static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_port *mr_sas_port,
> + struct mpi3mr_sas_phy *mr_sas_phy)
> +{
> + u64 sas_address = mr_sas_port->remote_identify.sas_address;
> +
> + dev_info(&mr_sas_phy->phy->dev,
> + "remove: sas_address(0x%016llx), phy(%d)\n",
> + (unsigned long long) sas_address, mr_sas_phy->phy_id);
> +
> + list_del(&mr_sas_phy->port_siblings);
> + mr_sas_port->num_phys--;
> + sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy);
> + mr_sas_phy->phy_belongs_to_port = 0;
> +}
> +
> +/**
> + * mpi3mr_add_sas_phy - Adding a single phy to a port
> + * @mrioc: Adapter instance reference
> + * @mr_sas_port: Internal Port object
> + * @mr_sas_phy: Internal Phy object
> + *
> + * Return: None.
> + */
> +static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_port *mr_sas_port,
> + struct mpi3mr_sas_phy *mr_sas_phy)
> +{
> + u64 sas_address = mr_sas_port->remote_identify.sas_address;
> +
> + dev_info(&mr_sas_phy->phy->dev,
> + "add: sas_address(0x%016llx), phy(%d)\n", (unsigned long long)
> + sas_address, mr_sas_phy->phy_id);
> +
> + list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list);
> + mr_sas_port->num_phys++;
> + sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy);
> + mr_sas_phy->phy_belongs_to_port = 1;
> +}
> +
> +/**
> + * mpi3mr_add_phy_to_an_existing_port - add phy to existing port
> + * @mrioc: Adapter instance reference
> + * @mr_sas_node: Internal sas node object (expander or host)
> + * @mr_sas_phy: Internal Phy object *
> + * @sas_address: SAS address of device/expander were phy needs
> + * to be added to
> + * @hba_port: HBA port entry
> + *
> + * Return: None.
> + */
> +static void mpi3mr_add_phy_to_an_existing_port(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy,
> + u64 sas_address, struct mpi3mr_hba_port *hba_port)
> +{
> + struct mpi3mr_sas_port *mr_sas_port;
> + struct mpi3mr_sas_phy *srch_phy;
> +
> + if (mr_sas_phy->phy_belongs_to_port == 1)
> + return;
> +
> + if (!hba_port)
> + return;
> +
> + list_for_each_entry(mr_sas_port, &mr_sas_node->sas_port_list,
> + port_list) {
> + if (mr_sas_port->remote_identify.sas_address !=
> + sas_address)
> + continue;
> + if (mr_sas_port->hba_port != hba_port)
> + continue;
> + list_for_each_entry(srch_phy, &mr_sas_port->phy_list,
> + port_siblings) {
> + if (srch_phy == mr_sas_phy)
> + return;
> + }
> + mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy);
> + return;
> + }
> +}
> +
> +/**
> + * mpi3mr_del_phy_from_an_existing_port - del phy from a port
> + * @mrioc: Adapter instance reference
> + * @mr_sas_node: Internal sas node object (expander or host)
> + * @mr_sas_phy: Internal Phy object
> + *
> + * Return: None.
> + */
> +static void mpi3mr_del_phy_from_an_existing_port(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy)
> +{
> + struct mpi3mr_sas_port *mr_sas_port, *next;
> + struct mpi3mr_sas_phy *srch_phy;
> +
> + if (mr_sas_phy->phy_belongs_to_port == 0)
> + return;
> +
> + list_for_each_entry_safe(mr_sas_port, next, &mr_sas_node->sas_port_list,
> + port_list) {
> + list_for_each_entry(srch_phy, &mr_sas_port->phy_list,
> + port_siblings) {
> + if (srch_phy != mr_sas_phy)
> + continue;
> + mpi3mr_delete_sas_phy(mrioc, mr_sas_port,
> + mr_sas_phy);
> + return;
> + }
> + }
> +}
> +
> +/**
> + * mpi3mr_sas_port_sanity_check - sanity check while adding port
> + * @mrioc: Adapter instance reference
> + * @mr_sas_node: Internal sas node object (expander or host)
> + * @sas_address: SAS address of device/expander
> + * @hba_port: HBA port entry
> + *
> + * Verifies whether the Phys attached to a device with the given
> + * SAS address already belongs to an existing sas port if so
> + * will remove those phys from the sas port
> + *
> + * Return: None.
> + */
> +static void mpi3mr_sas_port_sanity_check(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_node *mr_sas_node, u64 sas_address,
> + struct mpi3mr_hba_port *hba_port)
> +{
> + int i;
> +
> + for (i = 0; i < mr_sas_node->num_phys; i++) {
> + if ((mr_sas_node->phy[i].remote_identify.sas_address !=
> + sas_address) || (mr_sas_node->phy[i].hba_port != hba_port))
> + continue;
> + if (mr_sas_node->phy[i].phy_belongs_to_port == 1)
> + mpi3mr_del_phy_from_an_existing_port(mrioc,
> + mr_sas_node, &mr_sas_node->phy[i]);
> + }
> +}
> +
> +/**
> + * mpi3mr_set_identify - set identify for phys and end devices
> + * @mrioc: Adapter instance reference
> + * @handle: Firmware device handle
> + * @identify: SAS transport layer's identify info
> + *
> + * Populates sas identify info for a specific device.
> + *
> + * Return: 0 for success, non-zero for failure.
> + */
> +static int mpi3mr_set_identify(struct mpi3mr_ioc *mrioc, u16 handle,
> + struct sas_identify *identify)
> +{
> +
> + struct mpi3_device_page0 device_pg0;
> + struct mpi3_device0_sas_sata_format *sasinf;
> + u16 device_info;
> + u16 ioc_status;
> +
> + if (mrioc->reset_in_progress) {
> + ioc_err(mrioc, "%s: host reset in progress!\n", __func__);
> + return -EFAULT;
> + }
> +
> + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &device_pg0,
> + sizeof(device_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, handle))) {
> + ioc_err(mrioc, "%s: device page0 read failed\n", __func__);
> + return -ENXIO;
> + }
> +
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "device page read failed for handle(0x%04x), with ioc_status(0x%04x) failure at %s:%d/%s()!\n",
> + handle, ioc_status, __FILE__, __LINE__, __func__);
> + return -EIO;
> + }
> +
> + memset(identify, 0, sizeof(struct sas_identify));
> + sasinf = &device_pg0.device_specific.sas_sata_format;
> + device_info = le16_to_cpu(sasinf->device_info);
> +
> + /* sas_address */
> + identify->sas_address = le64_to_cpu(sasinf->sas_address);
> +
> + /* phy number of the parent device this device is linked to */
> + identify->phy_identifier = sasinf->phy_num;
> +
> + /* device_type */
> + switch (device_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) {
> + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE:
> + identify->device_type = SAS_PHY_UNUSED;
> + break;
> + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE:
> + identify->device_type = SAS_END_DEVICE;
> + break;
> + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER:
> + identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
> + break;
> + }
> +
> + /* initiator_port_protocols */
> + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_INITIATOR)
> + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
> + /* MPI3.0 doesn't have define for SATA INIT so setting both here*/
> + if (device_info & MPI3_SAS_DEVICE_INFO_STP_INITIATOR)
> + identify->initiator_port_protocols |= (SAS_PROTOCOL_STP |
> + SAS_PROTOCOL_SATA);
> + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_INITIATOR)
> + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
> +
> + /* target_port_protocols */
> + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_TARGET)
> + identify->target_port_protocols |= SAS_PROTOCOL_SSP;
> + /* MPI3.0 doesn't have define for STP Target so setting both here*/
> + if (device_info & MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET)
> + identify->target_port_protocols |= (SAS_PROTOCOL_STP |
> + SAS_PROTOCOL_SATA);
> + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_TARGET)
> + identify->target_port_protocols |= SAS_PROTOCOL_SMP;
> + return 0;
> +}
> +
> +/**
> + * mpi3mr_add_host_phy - report sas_host phy to SAS transport
> + * @mrioc: Adapter instance reference
> + * @mr_sas_phy: Internal Phy object
> + * @phy_pg0: SAS phy page 0
> + * @parent_dev: Prent device class object
> + *
> + * Return: 0 for success, non-zero for failure.
> + */
> +static int mpi3mr_add_host_phy(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_phy *mr_sas_phy, struct mpi3_sas_phy_page0 phy_pg0,
> + struct device *parent_dev)
> +{
> + struct sas_phy *phy;
> + int phy_index = mr_sas_phy->phy_id;
> +
> +
> + INIT_LIST_HEAD(&mr_sas_phy->port_siblings);
> + phy = sas_phy_alloc(parent_dev, phy_index);
> + if (!phy) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + return -1;
> + }
> + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle,
> + &mr_sas_phy->identify))) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + sas_phy_free(phy);
> + return -1;
> + }
> + phy->identify = mr_sas_phy->identify;
> + mr_sas_phy->attached_handle = le16_to_cpu(phy_pg0.attached_dev_handle);
> + if (mr_sas_phy->attached_handle)
> + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle,
> + &mr_sas_phy->remote_identify);
> + phy->identify.phy_identifier = mr_sas_phy->phy_id;
> + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate(
> + (phy_pg0.negotiated_link_rate &
> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >>
> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT);
> + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> + phy_pg0.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK);
> + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> + phy_pg0.hw_link_rate >> 4);
> + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate(
> + phy_pg0.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK);
> + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate(
> + phy_pg0.programmed_link_rate >> 4);
> + phy->hostdata = mr_sas_phy->hba_port;
> +
> + if ((sas_phy_add(phy))) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + sas_phy_free(phy);
> + return -1;
> + }
> + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
> + dev_info(&phy->dev,
> + "add: handle(0x%04x), sas_address(0x%016llx)\n"
> + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n",
> + mr_sas_phy->handle, (unsigned long long)
> + mr_sas_phy->identify.sas_address,
> + mr_sas_phy->attached_handle,
> + (unsigned long long)
> + mr_sas_phy->remote_identify.sas_address);
> + mr_sas_phy->phy = phy;
> + return 0;
> +}
> +
> +/**
> + * mpi3mr_add_expander_phy - report expander phy to transport
> + * @mrioc: Adapter instance reference
> + * @mr_sas_phy: Internal Phy object
> + * @expander_pg1: SAS Expander page 1
> + * @parent_dev: Parent device class object
> + *
> + * Return: 0 for success, non-zero for failure.
> + */
> +static int mpi3mr_add_expander_phy(struct mpi3mr_ioc *mrioc,
> + struct mpi3mr_sas_phy *mr_sas_phy,
> + struct mpi3_sas_expander_page1 expander_pg1,
> + struct device *parent_dev)
> +{
> + struct sas_phy *phy;
> + int phy_index = mr_sas_phy->phy_id;
> +
> + INIT_LIST_HEAD(&mr_sas_phy->port_siblings);
> + phy = sas_phy_alloc(parent_dev, phy_index);
> + if (!phy) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + return -1;
> + }
> + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle,
> + &mr_sas_phy->identify))) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + sas_phy_free(phy);
> + return -1;
> + }
> + phy->identify = mr_sas_phy->identify;
> + mr_sas_phy->attached_handle =
> + le16_to_cpu(expander_pg1.attached_dev_handle);
> + if (mr_sas_phy->attached_handle)
> + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle,
> + &mr_sas_phy->remote_identify);
> + phy->identify.phy_identifier = mr_sas_phy->phy_id;
> + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate(
> + (expander_pg1.negotiated_link_rate &
> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >>
> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT);
> + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> + expander_pg1.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK);
> + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> + expander_pg1.hw_link_rate >> 4);
> + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate(
> + expander_pg1.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK);
> + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate(
> + expander_pg1.programmed_link_rate >> 4);
> + phy->hostdata = mr_sas_phy->hba_port;
> +
> + if ((sas_phy_add(phy))) {
> + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> + __FILE__, __LINE__, __func__);
> + sas_phy_free(phy);
> + return -1;
> + }
> + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
> + dev_info(&phy->dev,
> + "add: handle(0x%04x), sas_address(0x%016llx)\n"
> + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n",
> + mr_sas_phy->handle, (unsigned long long)
> + mr_sas_phy->identify.sas_address,
> + mr_sas_phy->attached_handle,
> + (unsigned long long)
> + mr_sas_phy->remote_identify.sas_address);
> + mr_sas_phy->phy = phy;
> + return 0;
> +}
> --
> 2.27.0
>
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
—
Himanshu Madhani Oracle Linux Engineering
