- Update the Host's sas ports if there is change in port id
or phys. If the port id is changed then the driver updates
the same. If some phys are enabled/disabled during reset then
driver updates the same in STL.
- Check for the responding expander devices and update the
device handle if it got changed. Register the expander with
STL if it got added during reset and unregister the
expander device if it got removed during reset.
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
---
drivers/scsi/mpi3mr/mpi3mr.h | 11 +
drivers/scsi/mpi3mr/mpi3mr_fw.c | 10 +-
drivers/scsi/mpi3mr/mpi3mr_os.c | 50 ++++
drivers/scsi/mpi3mr/mpi3mr_transport.c | 350 +++++++++++++++++++++++++
4 files changed, 420 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index d203167..0f47b45 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -482,6 +482,9 @@ struct mpi3mr_hba_port {
* struct mpi3mr_sas_port - Internal SAS port information
* @port_list: List of ports belonging to a SAS node
* @num_phys: Number of phys associated with port
+ * @marked_responding: used while refresing the sas ports
+ * @lowest_phy: lowest phy ID of current sas port
+ * @phy_mask: phy_mask of current sas port
* @hba_port: HBA port entry
* @remote_identify: Attached device identification
* @rphy: SAS transport layer rphy object
@@ -491,6 +494,9 @@ struct mpi3mr_hba_port {
struct mpi3mr_sas_port {
struct list_head port_list;
u8 num_phys;
+ u8 marked_responding;
+ int lowest_phy;
+ u32 phy_mask;
struct mpi3mr_hba_port *hba_port;
struct sas_identify remote_identify;
struct sas_rphy *rphy;
@@ -939,6 +945,7 @@ struct scmd_priv {
* @scan_started: Async scan started
* @scan_failed: Asycn scan failed
* @stop_drv_processing: Stop all command processing
+ * @device_refresh_on: Don't process the events until devices are refreshed
* @max_host_ios: Maximum host I/O count
* @chain_buf_count: Chain buffer count
* @chain_buf_pool: Chain buffer pool
@@ -1107,6 +1114,7 @@ struct mpi3mr_ioc {
u8 scan_started;
u16 scan_failed;
u8 stop_drv_processing;
+ u8 device_refresh_on;
u16 max_host_ios;
spinlock_t tgtdev_lock;
@@ -1378,4 +1386,7 @@ struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr_and_rphy(
struct mpi3mr_ioc *mrioc, u64 sas_address, struct sas_rphy *rphy);
void mpi3mr_print_device_event_notice(struct mpi3mr_ioc *mrioc,
bool device_add);
+void mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc);
+void mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc);
+void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc);
#endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 866ad22..cc700e2 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3974,6 +3974,11 @@ retry_init:
goto out_failed;
}
+ if (!is_resume) {
+ mrioc->device_refresh_on = 1;
+ mpi3mr_add_event_wait_for_device_refresh(mrioc);
+ }
+
ioc_info(mrioc, "sending port enable\n");
retval = mpi3mr_issue_port_enable(mrioc, 0);
if (retval) {
@@ -4730,6 +4735,7 @@ int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc,
ioc_info(mrioc, "controller reset is triggered by %s\n",
mpi3mr_reset_rc_name(reset_reason));
+ mrioc->device_refresh_on = 0;
mrioc->reset_in_progress = 1;
mrioc->stop_bsgs = 1;
mrioc->prev_reset_result = -1;
@@ -4811,7 +4817,8 @@ out:
mpi3mr_pel_wait_post(mrioc, &mrioc->pel_cmds);
}
- mpi3mr_rfresh_tgtdevs(mrioc);
+ mrioc->device_refresh_on = 0;
+
mrioc->ts_update_counter = 0;
spin_lock_irqsave(&mrioc->watchdog_lock, flags);
if (mrioc->watchdog_work_q)
@@ -4825,6 +4832,7 @@ out:
} else {
mpi3mr_issue_reset(mrioc,
MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason);
+ mrioc->device_refresh_on = 0;
mrioc->unrecoverable = 1;
mrioc->reset_in_progress = 0;
retval = -1;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 71f1cef..4c8ef9f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -40,6 +40,8 @@ static void mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event,
#define MPI3MR_DRIVER_EVENT_TG_QD_REDUCTION (0xFFFF)
+#define MPI3_EVENT_WAIT_FOR_DEVICES_TO_REFRESH (0xFFFE)
+
/**
* mpi3mr_host_tag_for_scmd - Get host tag for a scmd
* @mrioc: Adapter instance reference
@@ -1114,6 +1116,9 @@ static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc,
MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL)) ||
(tgtdev->parent_handle == 0xFFFF))
tgtdev->non_stl = 1;
+ if (tgtdev->dev_spec.sas_sata_inf.hba_port)
+ tgtdev->dev_spec.sas_sata_inf.hba_port->port_id =
+ dev_pg0->io_unit_port;
break;
}
case MPI3_DEVICE_DEVFORM_PCIE:
@@ -1887,6 +1892,22 @@ static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc,
}
break;
}
+ case MPI3_EVENT_WAIT_FOR_DEVICES_TO_REFRESH:
+ {
+ while (mrioc->device_refresh_on)
+ msleep(500);
+
+ dprint_event_bh(mrioc,
+ "scan for non responding and newly added devices after soft reset started\n");
+ if (mrioc->sas_transport_enabled) {
+ mpi3mr_refresh_sas_ports(mrioc);
+ mpi3mr_refresh_expanders(mrioc);
+ }
+ mpi3mr_rfresh_tgtdevs(mrioc);
+ ioc_info(mrioc,
+ "scan for non responding and newly added devices after soft reset completed\n");
+ break;
+ }
default:
break;
}
@@ -2656,6 +2677,35 @@ static void mpi3mr_cablemgmt_evt_th(struct mpi3mr_ioc *mrioc,
}
}
+/**
+ * mpi3mr_add_event_wait_for_device_refresh - Add Wait for Device Refresh Event
+ * @mrioc: Adapter instance reference
+ *
+ * Add driver specific event to make sure that the driver won't process the
+ * events until all the devices are refreshed during soft reset.
+ *
+ * Return: Nothing
+ */
+void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_fwevt *fwevt = NULL;
+
+ fwevt = mpi3mr_alloc_fwevt(0);
+ if (!fwevt) {
+ dprint_event_th(mrioc,
+ "failed to schedule bottom half handler for event(0x%02x)\n",
+ MPI3_EVENT_WAIT_FOR_DEVICES_TO_REFRESH);
+ return;
+ }
+ fwevt->mrioc = mrioc;
+ fwevt->event_id = MPI3_EVENT_WAIT_FOR_DEVICES_TO_REFRESH;
+ fwevt->send_ack = 0;
+ fwevt->process_evt = 1;
+ fwevt->evt_ctx = 0;
+ fwevt->event_data_size = 0;
+ mpi3mr_fwevt_add_to_list(mrioc, fwevt);
+}
+
/**
* mpi3mr_os_handle_events - Firmware event handler
* @mrioc: Adapter instance reference
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index b7fcfb3..c27e441 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -9,6 +9,9 @@
#include "mpi3mr.h"
+static void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc,
+ struct mpi3mr_sas_node *sas_expander);
+
/**
* mpi3mr_post_transport_req - Issue transport requests and wait
* @mrioc: Adapter instance reference
@@ -596,6 +599,9 @@ static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
list_del(&mr_sas_phy->port_siblings);
mr_sas_port->num_phys--;
+ mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id);
+ if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id)
+ mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy);
mr_sas_phy->phy_belongs_to_port = 0;
}
@@ -620,6 +626,9 @@ static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list);
mr_sas_port->num_phys++;
+ mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id);
+ if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy)
+ mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy);
mr_sas_phy->phy_belongs_to_port = 1;
}
@@ -1351,6 +1360,7 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
list_add_tail(&mr_sas_node->phy[i].port_siblings,
&mr_sas_port->phy_list);
mr_sas_port->num_phys++;
+ mr_sas_port->phy_mask |= (1 << i);
}
if (!mr_sas_port->num_phys) {
@@ -1359,6 +1369,8 @@ static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc,
goto out_fail;
}
+ mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1;
+
if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) {
tgtdev = mpi3mr_get_tgtdev_by_addr(mrioc,
mr_sas_port->remote_identify.sas_address,
@@ -1560,6 +1572,344 @@ static void mpi3mr_sas_port_remove(struct mpi3mr_ioc *mrioc, u64 sas_address,
kfree(mr_sas_port);
}
+/**
+ * struct host_port - host port details
+ * @sas_address: SAS Address of the attached device
+ * @phy_mask: phy mask of host port
+ * @handle: Device Handle of attached device
+ * @iounit_port_id: port ID
+ * @used: host port is already matched with sas port from sas_port_list
+ * @lowest_phy: lowest phy ID of host port
+ */
+struct host_port {
+ u64 sas_address;
+ u32 phy_mask;
+ u16 handle;
+ u8 iounit_port_id;
+ u8 used;
+ u8 lowest_phy;
+};
+
+/**
+ * mpi3mr_update_mr_sas_port - update sas port objects during reset
+ * @mrioc: Adapter instance reference
+ * @h_port: host_port object
+ * @mr_sas_port: sas_port objects which needs to be updated
+ *
+ * Update the port ID of sas port object. Also add the phys if new phys got
+ * added to current sas port and remove the phys if some phys are moved
+ * out of the current sas port.
+ *
+ * Return: Nothing.
+ */
+static void
+mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
+ struct mpi3mr_sas_port *mr_sas_port)
+{
+ struct mpi3mr_sas_phy *mr_sas_phy;
+ u32 phy_mask_xor, phys_to_be_added, phys_to_be_removed;
+ int i;
+
+ h_port->used = 1;
+ mr_sas_port->marked_responding = 1;
+
+ dev_info(&mr_sas_port->port->dev,
+ "sas_address(0x%016llx), old: port_id %d phy_mask 0x%x, new: port_id %d phy_mask:0x%x\n",
+ mr_sas_port->remote_identify.sas_address,
+ mr_sas_port->hba_port->port_id, mr_sas_port->phy_mask,
+ h_port->iounit_port_id, h_port->phy_mask);
+
+ mr_sas_port->hba_port->port_id = h_port->iounit_port_id;
+ mr_sas_port->hba_port->flags &= ~MPI3MR_HBA_PORT_FLAG_DIRTY;
+
+ /* Get the newly added phys bit map & removed phys bit map */
+ phy_mask_xor = mr_sas_port->phy_mask ^ h_port->phy_mask;
+ phys_to_be_added = h_port->phy_mask & phy_mask_xor;
+ phys_to_be_removed = mr_sas_port->phy_mask & phy_mask_xor;
+
+ /*
+ * Register these new phys to current mr_sas_port's port.
+ * if these phys are previously registered with another port
+ * then delete these phys from that port first.
+ */
+ for_each_set_bit(i, (ulong *) &phys_to_be_added, BITS_PER_TYPE(u32)) {
+ mr_sas_phy = &mrioc->sas_hba.phy[i];
+ if (mr_sas_phy->phy_belongs_to_port)
+ mpi3mr_del_phy_from_an_existing_port(mrioc,
+ &mrioc->sas_hba, mr_sas_phy);
+ mpi3mr_add_phy_to_an_existing_port(mrioc,
+ &mrioc->sas_hba, mr_sas_phy,
+ mr_sas_port->remote_identify.sas_address,
+ mr_sas_port->hba_port);
+ }
+
+ /* Delete the phys which are not part of current mr_sas_port's port. */
+ for_each_set_bit(i, (ulong *) &phys_to_be_removed, BITS_PER_TYPE(u32)) {
+ mr_sas_phy = &mrioc->sas_hba.phy[i];
+ if (mr_sas_phy->phy_belongs_to_port)
+ mpi3mr_del_phy_from_an_existing_port(mrioc,
+ &mrioc->sas_hba, mr_sas_phy);
+ }
+}
+
+/**
+ * mpi3mr_refresh_sas_ports - update host's sas ports during reset
+ * @mrioc: Adapter instance reference
+ *
+ * Update the host's sas ports during reset by checking whether
+ * sas ports are still intact or not. Add/remove phys if any hba
+ * phys are (moved in)/(moved out) of sas port. Also update
+ * io_unit_port if it got changed during reset.
+ *
+ * Return: Nothing.
+ */
+void
+mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc)
+{
+ struct host_port h_port[32];
+ int i, j, found, host_port_count = 0, port_idx;
+ u16 sz, attached_handle, ioc_status;
+ struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL;
+ struct mpi3_device_page0 dev_pg0;
+ struct mpi3_device0_sas_sata_format *sasinf;
+ struct mpi3mr_sas_port *mr_sas_port;
+
+ sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) +
+ (mrioc->sas_hba.num_phys *
+ sizeof(struct mpi3_sas_io_unit0_phy_data));
+ sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_io_unit_pg0)
+ return;
+ if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) {
+ ioc_err(mrioc, "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ /* Create a new expander port table */
+ for (i = 0; i < mrioc->sas_hba.num_phys; i++) {
+ attached_handle = le16_to_cpu(
+ sas_io_unit_pg0->phy_data[i].attached_dev_handle);
+ if (!attached_handle)
+ continue;
+ found = 0;
+ for (j = 0; j < host_port_count; j++) {
+ if (h_port[j].handle == attached_handle) {
+ h_port[j].phy_mask |= (1 << i);
+ found = 1;
+ break;
+ }
+ }
+ if (found)
+ continue;
+ if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &dev_pg0,
+ sizeof(dev_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE,
+ attached_handle))) {
+ dprint_reset(mrioc,
+ "failed to read dev_pg0 for handle(0x%04x) at %s:%d/%s()!\n",
+ attached_handle, __FILE__, __LINE__, __func__);
+ continue;
+ }
+ if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ dprint_reset(mrioc,
+ "ioc_status(0x%x) while reading dev_pg0 for handle(0x%04x) at %s:%d/%s()!\n",
+ ioc_status, attached_handle,
+ __FILE__, __LINE__, __func__);
+ continue;
+ }
+ sasinf = &dev_pg0.device_specific.sas_sata_format;
+
+ port_idx = host_port_count;
+ h_port[port_idx].sas_address = le64_to_cpu(sasinf->sas_address);
+ h_port[port_idx].handle = attached_handle;
+ h_port[port_idx].phy_mask = (1 << i);
+ h_port[port_idx].iounit_port_id = sas_io_unit_pg0->phy_data[i].io_unit_port;
+ h_port[port_idx].lowest_phy = sasinf->phy_num;
+ h_port[port_idx].used = 0;
+ host_port_count++;
+ }
+
+ if (!host_port_count)
+ goto out;
+
+ if (mrioc->logging_level & MPI3_DEBUG_RESET) {
+ ioc_info(mrioc, "Host port details before reset\n");
+ list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
+ port_list) {
+ ioc_info(mrioc,
+ "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n",
+ mr_sas_port->hba_port->port_id,
+ mr_sas_port->remote_identify.sas_address,
+ mr_sas_port->phy_mask, mr_sas_port->lowest_phy);
+ }
+ mr_sas_port = NULL;
+ ioc_info(mrioc, "Host port details after reset\n");
+ for (i = 0; i < host_port_count; i++) {
+ ioc_info(mrioc,
+ "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n",
+ h_port[i].iounit_port_id, h_port[i].sas_address,
+ h_port[i].phy_mask, h_port[i].lowest_phy);
+ }
+ }
+
+ /* mark all host sas port entries as dirty */
+ list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
+ port_list) {
+ mr_sas_port->marked_responding = 0;
+ mr_sas_port->hba_port->flags |= MPI3MR_HBA_PORT_FLAG_DIRTY;
+ }
+
+ /* First check for matching lowest phy */
+ for (i = 0; i < host_port_count; i++) {
+ mr_sas_port = NULL;
+ list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
+ port_list) {
+ if (mr_sas_port->marked_responding)
+ continue;
+ if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address)
+ continue;
+ if (h_port[i].lowest_phy == mr_sas_port->lowest_phy) {
+ mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port);
+ break;
+ }
+ }
+ }
+
+ /* In case if lowest phy is got enabled or disabled during reset */
+ for (i = 0; i < host_port_count; i++) {
+ if (h_port[i].used)
+ continue;
+ mr_sas_port = NULL;
+ list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
+ port_list) {
+ if (mr_sas_port->marked_responding)
+ continue;
+ if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address)
+ continue;
+ if (h_port[i].phy_mask & mr_sas_port->phy_mask) {
+ mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port);
+ break;
+ }
+ }
+ }
+
+ /* In case if expander cable is removed & connected to another HBA port during reset */
+ for (i = 0; i < host_port_count; i++) {
+ if (h_port[i].used)
+ continue;
+ mr_sas_port = NULL;
+ list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
+ port_list) {
+ if (mr_sas_port->marked_responding)
+ continue;
+ if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address)
+ continue;
+ mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port);
+ break;
+ }
+ }
+out:
+ kfree(sas_io_unit_pg0);
+}
+
+/**
+ * mpi3mr_refresh_expanders - Refresh expander device exposure
+ * @mrioc: Adapter instance reference
+ *
+ * This is executed post controller reset to identify any
+ * missing expander devices during reset and remove from the upper layers
+ * or expose any newly detected expander device to the upper layers.
+ *
+ * Return: Nothing.
+ */
+void
+mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc)
+{
+ struct mpi3mr_sas_node *sas_expander, *sas_expander_next;
+ struct mpi3_sas_expander_page0 expander_pg0;
+ u16 ioc_status, handle;
+ u64 sas_address;
+ int i;
+ unsigned long flags;
+ struct mpi3mr_hba_port *hba_port;
+
+ spin_lock_irqsave(&mrioc->sas_node_lock, flags);
+ list_for_each_entry(sas_expander, &mrioc->sas_expander_list, list) {
+ sas_expander->non_responding = 1;
+ }
+ spin_unlock_irqrestore(&mrioc->sas_node_lock, flags);
+
+ sas_expander = NULL;
+
+ handle = 0xffff;
+
+ /* Search for responding expander devices and add them if they are newly got added */
+ while (true) {
+ if ((mpi3mr_cfg_get_sas_exp_pg0(mrioc, &ioc_status, &expander_pg0,
+ sizeof(struct mpi3_sas_expander_page0),
+ MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ dprint_reset(mrioc,
+ "failed to read exp pg0 for handle(0x%04x) at %s:%d/%s()!\n",
+ handle, __FILE__, __LINE__, __func__);
+ break;
+ }
+
+ if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
+ dprint_reset(mrioc,
+ "ioc_status(0x%x) while reading exp pg0 for handle:(0x%04x), %s:%d/%s()!\n",
+ ioc_status, handle, __FILE__, __LINE__, __func__);
+ break;
+ }
+
+ handle = le16_to_cpu(expander_pg0.dev_handle);
+ sas_address = le64_to_cpu(expander_pg0.sas_address);
+ hba_port = mpi3mr_get_hba_port_by_id(mrioc, expander_pg0.io_unit_port);
+
+ if (!hba_port) {
+ mpi3mr_sas_host_refresh(mrioc);
+ mpi3mr_expander_add(mrioc, handle);
+ continue;
+ }
+
+ spin_lock_irqsave(&mrioc->sas_node_lock, flags);
+ sas_expander =
+ mpi3mr_expander_find_by_sas_address(mrioc,
+ sas_address, hba_port);
+ spin_unlock_irqrestore(&mrioc->sas_node_lock, flags);
+
+ if (!sas_expander) {
+ mpi3mr_sas_host_refresh(mrioc);
+ mpi3mr_expander_add(mrioc, handle);
+ continue;
+ }
+
+ sas_expander->non_responding = 0;
+ if (sas_expander->handle == handle)
+ continue;
+
+ sas_expander->handle = handle;
+ for (i = 0 ; i < sas_expander->num_phys ; i++)
+ sas_expander->phy[i].handle = handle;
+ }
+
+ /*
+ * Delete non responding expander devices and the corresponding
+ * hba_port if the non responding expander device's parent device
+ * is a host node.
+ */
+ sas_expander = NULL;
+ spin_lock_irqsave(&mrioc->sas_node_lock, flags);
+ list_for_each_entry_safe_reverse(sas_expander, sas_expander_next,
+ &mrioc->sas_expander_list, list) {
+ if (sas_expander->non_responding) {
+ spin_unlock_irqrestore(&mrioc->sas_node_lock, flags);
+ mpi3mr_expander_node_remove(mrioc, sas_expander);
+ spin_lock_irqsave(&mrioc->sas_node_lock, flags);
+ }
+ }
+ spin_unlock_irqrestore(&mrioc->sas_node_lock, flags);
+}
+
/**
* mpi3mr_expander_node_add - insert an expander to the list.
* @mrioc: Adapter instance reference
--
2.27.0
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
