On Sat, Jul 30, 2022 at 1:12 AM Himanshu Madhani
<himanshu.madhani@xxxxxxxxxx> wrote:
>
>
>
> > On Jul 29, 2022, at 6:16 AM, Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx> wrote:
> >
> > Added framework to register and unregister the
> > host and expander phys with SCSI Transport Layer (STL).
> >
> > Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
> > ---
> > drivers/scsi/mpi3mr/Makefile | 1 +
> > drivers/scsi/mpi3mr/mpi3mr.h | 93 ++++++
> > drivers/scsi/mpi3mr/mpi3mr_transport.c | 430 +++++++++++++++++++++++++
> > 3 files changed, 524 insertions(+)
> > create mode 100644 drivers/scsi/mpi3mr/mpi3mr_transport.c
> >
> > diff --git a/drivers/scsi/mpi3mr/Makefile b/drivers/scsi/mpi3mr/Makefile
> > index f5cdbe4..ef86ca4 100644
> > --- a/drivers/scsi/mpi3mr/Makefile
> > +++ b/drivers/scsi/mpi3mr/Makefile
> > @@ -3,3 +3,4 @@ obj-m += mpi3mr.o
> > mpi3mr-y += mpi3mr_os.o \
> > mpi3mr_fw.o \
> > mpi3mr_app.o \
> > + mpi3mr_transport.o
> > diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
> > index 542b462..006bc5d 100644
> > --- a/drivers/scsi/mpi3mr/mpi3mr.h
> > +++ b/drivers/scsi/mpi3mr/mpi3mr.h
> > @@ -39,6 +39,7 @@
> > #include <scsi/scsi_host.h>
> > #include <scsi/scsi_tcq.h>
> > #include <uapi/scsi/scsi_bsg_mpi3mr.h>
> > +#include <scsi/scsi_transport_sas.h>
> >
> > #include "mpi/mpi30_transport.h"
> > #include "mpi/mpi30_cnfg.h"
> > @@ -461,6 +462,98 @@ struct mpi3mr_throttle_group_info {
> > atomic_t pend_large_data_sz;
> > };
> >
> > +/* HBA port flags */
> > +#define MPI3MR_HBA_PORT_FLAG_DIRTY 0x01
> > +
> > +/**
> > + * struct mpi3mr_hba_port - HBA's port information
> > + * @port_id: Port number
> > + * @flags: HBA port flags
> > + */
> > +struct mpi3mr_hba_port {
> > + struct list_head list;
> > + u8 port_id;
> > + u8 flags;
> > +};
> > +
> > +/**
> > + * struct mpi3mr_sas_port - Internal SAS port information
> > + * @port_list: List of ports belonging to a SAS node
> > + * @num_phys: Number of phys associated with port
> > + * @hba_port: HBA port entry
> > + * @remote_identify: Attached device identification
> > + * @rphy: SAS transport layer rphy object
> > + * @port: SAS transport layer port object
> > + * @phy_list: mpi3mr_sas_phy objects belonging to this port
> > + */
> > +struct mpi3mr_sas_port {
> > + struct list_head port_list;
> > + u8 num_phys;
> > + struct mpi3mr_hba_port *hba_port;
> > + struct sas_identify remote_identify;
> > + struct sas_rphy *rphy;
> > + struct sas_port *port;
> > + struct list_head phy_list;
> > +};
> > +
> > +/**
> > + * struct mpi3mr_sas_phy - Internal SAS Phy information
> > + * @port_siblings: List of phys belonging to a port
> > + * @identify: Phy identification
> > + * @remote_identify: Attached device identification
> > + * @phy: SAS transport layer Phy object
> > + * @phy_id: Unique phy id within a port
> > + * @handle: Firmware device handle for this phy
> > + * @attached_handle: Firmware device handle for attached device
> > + * @phy_belongs_to_port: Flag to indicate phy belongs to port
> > + @hba_port: HBA port entry
> > + */
> > +struct mpi3mr_sas_phy {
> > + struct list_head port_siblings;
> > + struct sas_identify identify;
> > + struct sas_identify remote_identify;
> > + struct sas_phy *phy;
> > + u8 phy_id;
> > + u16 handle;
> > + u16 attached_handle;
> > + u8 phy_belongs_to_port;
> > + struct mpi3mr_hba_port *hba_port;
> > +};
> > +
> > +/**
> > + * struct mpi3mr_sas_node - SAS host/expander information
> > + * @list: List of sas nodes in a controller
> > + * @parent_dev: Parent device class
> > + * @num_phys: Number phys belonging to sas_node
> > + * @sas_address: SAS address of sas_node
> > + * @handle: Firmware device handle for this sas_host/expander
> > + * @sas_address_parent: SAS address of parent expander or host
> > + * @enclosure_handle: Firmware handle of enclosure of this node
> > + * @device_info: Capabilities of this sas_host/expander
> > + * @non_responding: used to refresh the expander devices during reset
> > + * @host_node: Flag to indicate this is a host_node
> > + * @hba_port: HBA port entry
> > + * @phy: A list of phys that make up this sas_host/expander
> > + * @sas_port_list: List of internal ports of this node
> > + * @rphy: sas_rphy object of this expander node
> > + */
> > +struct mpi3mr_sas_node {
> > + struct list_head list;
> > + struct device *parent_dev;
> > + u8 num_phys;
> > + u64 sas_address;
> > + u16 handle;
> > + u64 sas_address_parent;
> > + u16 enclosure_handle;
> > + u64 enclosure_logical_id;
> > + u8 non_responding;
> > + u8 host_node;
> > + struct mpi3mr_hba_port *hba_port;
> > + struct mpi3mr_sas_phy *phy;
> > + struct list_head sas_port_list;
> > + struct sas_rphy *rphy;
> > +};
> > +
> > /**
> > * struct mpi3mr_enclosure_node - enclosure information
> > * @list: List of enclosures
> > diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
> > new file mode 100644
> > index 0000000..989bf63
> > --- /dev/null
> > +++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
> > @@ -0,0 +1,430 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Driver for Broadcom MPI3 Storage Controllers
> > + *
> > + * Copyright (C) 2017-2022 Broadcom Inc.
> > + * (mailto: mpi3mr-linuxdrv.pdl@xxxxxxxxxxxx)
> > + *
> > + */
> > +
> > +#include "mpi3mr.h"
> > +
> > +/**
> > + * mpi3mr_convert_phy_link_rate -
> > + * @link_rate: link rate as defined in the MPI header
> > + *
> > + * Convert link_rate from mpi format into sas_transport layer
> > + * form.
> > + *
> > + * Return: A valid SAS transport layer defined link rate
> > + */
> > +static enum sas_linkrate mpi3mr_convert_phy_link_rate(u8 link_rate)
> > +{
> > + enum sas_linkrate rc;
> > +
> > + switch (link_rate) {
> > + case MPI3_SAS_NEG_LINK_RATE_1_5:
> > + rc = SAS_LINK_RATE_1_5_GBPS;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_3_0:
> > + rc = SAS_LINK_RATE_3_0_GBPS;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_6_0:
> > + rc = SAS_LINK_RATE_6_0_GBPS;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_12_0:
> > + rc = SAS_LINK_RATE_12_0_GBPS;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_22_5:
> > + rc = SAS_LINK_RATE_12_0_GBPS;
>
> This should be SAS_LINK_RATE_22_5_GBPS
Agree. Will update in next version patch set.
>
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED:
> > + rc = SAS_PHY_DISABLED;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED:
> > + rc = SAS_LINK_RATE_FAILED;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR:
> > + rc = SAS_SATA_PORT_SELECTOR;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS:
> > + rc = SAS_PHY_RESET_IN_PROGRESS;
> > + break;
> > + case MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE:
> > + case MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE:
> > + default:
> > + rc = SAS_LINK_RATE_UNKNOWN;
> > + break;
> > + }
> > + return rc;
> > +}
> > +
> > +/**
> > + * mpi3mr_delete_sas_phy - Remove a single phy from port
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_port: Internal Port object
> > + * @mr_sas_phy: Internal Phy object
> > + *
> > + * Return: None.
> > + */
> > +static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_port *mr_sas_port,
> > + struct mpi3mr_sas_phy *mr_sas_phy)
> > +{
> > + u64 sas_address = mr_sas_port->remote_identify.sas_address;
> > +
> > + dev_info(&mr_sas_phy->phy->dev,
> > + "remove: sas_address(0x%016llx), phy(%d)\n",
> > + (unsigned long long) sas_address, mr_sas_phy->phy_id);
> > +
> > + list_del(&mr_sas_phy->port_siblings);
> > + mr_sas_port->num_phys--;
> > + sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy);
> > + mr_sas_phy->phy_belongs_to_port = 0;
> > +}
> > +
> > +/**
> > + * mpi3mr_add_sas_phy - Adding a single phy to a port
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_port: Internal Port object
> > + * @mr_sas_phy: Internal Phy object
> > + *
> > + * Return: None.
> > + */
> > +static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_port *mr_sas_port,
> > + struct mpi3mr_sas_phy *mr_sas_phy)
> > +{
> > + u64 sas_address = mr_sas_port->remote_identify.sas_address;
> > +
> > + dev_info(&mr_sas_phy->phy->dev,
> > + "add: sas_address(0x%016llx), phy(%d)\n", (unsigned long long)
> > + sas_address, mr_sas_phy->phy_id);
> > +
> > + list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list);
> > + mr_sas_port->num_phys++;
> > + sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy);
> > + mr_sas_phy->phy_belongs_to_port = 1;
> > +}
> > +
> > +/**
> > + * mpi3mr_add_phy_to_an_existing_port - add phy to existing port
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_node: Internal sas node object (expander or host)
> > + * @mr_sas_phy: Internal Phy object *
> > + * @sas_address: SAS address of device/expander were phy needs
> > + * to be added to
> > + * @hba_port: HBA port entry
> > + *
> > + * Return: None.
> > + */
> > +static void mpi3mr_add_phy_to_an_existing_port(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy,
> > + u64 sas_address, struct mpi3mr_hba_port *hba_port)
> > +{
> > + struct mpi3mr_sas_port *mr_sas_port;
> > + struct mpi3mr_sas_phy *srch_phy;
> > +
> > + if (mr_sas_phy->phy_belongs_to_port == 1)
> > + return;
> > +
> > + if (!hba_port)
> > + return;
> > +
> > + list_for_each_entry(mr_sas_port, &mr_sas_node->sas_port_list,
> > + port_list) {
> > + if (mr_sas_port->remote_identify.sas_address !=
> > + sas_address)
> > + continue;
> > + if (mr_sas_port->hba_port != hba_port)
> > + continue;
> > + list_for_each_entry(srch_phy, &mr_sas_port->phy_list,
> > + port_siblings) {
> > + if (srch_phy == mr_sas_phy)
> > + return;
> > + }
> > + mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy);
> > + return;
> > + }
> > +}
> > +
> > +/**
> > + * mpi3mr_del_phy_from_an_existing_port - del phy from a port
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_node: Internal sas node object (expander or host)
> > + * @mr_sas_phy: Internal Phy object
> > + *
> > + * Return: None.
> > + */
> > +static void mpi3mr_del_phy_from_an_existing_port(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy)
> > +{
> > + struct mpi3mr_sas_port *mr_sas_port, *next;
> > + struct mpi3mr_sas_phy *srch_phy;
> > +
> > + if (mr_sas_phy->phy_belongs_to_port == 0)
> > + return;
> > +
> > + list_for_each_entry_safe(mr_sas_port, next, &mr_sas_node->sas_port_list,
> > + port_list) {
> > + list_for_each_entry(srch_phy, &mr_sas_port->phy_list,
> > + port_siblings) {
> > + if (srch_phy != mr_sas_phy)
> > + continue;
> > + mpi3mr_delete_sas_phy(mrioc, mr_sas_port,
> > + mr_sas_phy);
> > + return;
> > + }
> > + }
> > +}
> > +
> > +/**
> > + * mpi3mr_sas_port_sanity_check - sanity check while adding port
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_node: Internal sas node object (expander or host)
> > + * @sas_address: SAS address of device/expander
> > + * @hba_port: HBA port entry
> > + *
> > + * Verifies whether the Phys attached to a device with the given
> > + * SAS address already belongs to an existing sas port if so
> > + * will remove those phys from the sas port
> > + *
> > + * Return: None.
> > + */
> > +static void mpi3mr_sas_port_sanity_check(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_node *mr_sas_node, u64 sas_address,
> > + struct mpi3mr_hba_port *hba_port)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < mr_sas_node->num_phys; i++) {
> > + if ((mr_sas_node->phy[i].remote_identify.sas_address !=
> > + sas_address) || (mr_sas_node->phy[i].hba_port != hba_port))
> > + continue;
> > + if (mr_sas_node->phy[i].phy_belongs_to_port == 1)
> > + mpi3mr_del_phy_from_an_existing_port(mrioc,
> > + mr_sas_node, &mr_sas_node->phy[i]);
> > + }
> > +}
> > +
> > +/**
> > + * mpi3mr_set_identify - set identify for phys and end devices
> > + * @mrioc: Adapter instance reference
> > + * @handle: Firmware device handle
> > + * @identify: SAS transport layer's identify info
> > + *
> > + * Populates sas identify info for a specific device.
> > + *
> > + * Return: 0 for success, non-zero for failure.
> > + */
> > +static int mpi3mr_set_identify(struct mpi3mr_ioc *mrioc, u16 handle,
> > + struct sas_identify *identify)
> > +{
> > +
> > + struct mpi3_device_page0 device_pg0;
> > + struct mpi3_device0_sas_sata_format *sasinf;
> > + u16 device_info;
> > + u16 ioc_status;
> > +
> > + if (mrioc->reset_in_progress) {
> > + ioc_err(mrioc, "%s: host reset in progress!\n", __func__);
> > + return -EFAULT;
> > + }
> > +
> > + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &device_pg0,
> > + sizeof(device_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, handle))) {
> > + ioc_err(mrioc, "%s: device page0 read failed\n", __func__);
> > + return -ENXIO;
> > + }
> > +
> > + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> > + ioc_err(mrioc, "device page read failed for handle(0x%04x), with ioc_status(0x%04x) failure at %s:%d/%s()!\n",
> > + handle, ioc_status, __FILE__, __LINE__, __func__);
> > + return -EIO;
> > + }
> > +
> > + memset(identify, 0, sizeof(struct sas_identify));
> > + sasinf = &device_pg0.device_specific.sas_sata_format;
> > + device_info = le16_to_cpu(sasinf->device_info);
> > +
> > + /* sas_address */
> > + identify->sas_address = le64_to_cpu(sasinf->sas_address);
> > +
> > + /* phy number of the parent device this device is linked to */
> > + identify->phy_identifier = sasinf->phy_num;
> > +
> > + /* device_type */
> > + switch (device_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) {
> > + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE:
> > + identify->device_type = SAS_PHY_UNUSED;
> > + break;
> > + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE:
> > + identify->device_type = SAS_END_DEVICE;
> > + break;
> > + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER:
> > + identify->device_type = SAS_EDGE_EXPANDER_DEVICE;
> > + break;
> > + }
> > +
> > + /* initiator_port_protocols */
> > + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_INITIATOR)
> > + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP;
> > + /* MPI3.0 doesn't have define for SATA INIT so setting both here*/
> > + if (device_info & MPI3_SAS_DEVICE_INFO_STP_INITIATOR)
> > + identify->initiator_port_protocols |= (SAS_PROTOCOL_STP |
> > + SAS_PROTOCOL_SATA);
> > + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_INITIATOR)
> > + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP;
> > +
> > + /* target_port_protocols */
> > + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_TARGET)
> > + identify->target_port_protocols |= SAS_PROTOCOL_SSP;
> > + /* MPI3.0 doesn't have define for STP Target so setting both here*/
> > + if (device_info & MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET)
> > + identify->target_port_protocols |= (SAS_PROTOCOL_STP |
> > + SAS_PROTOCOL_SATA);
> > + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_TARGET)
> > + identify->target_port_protocols |= SAS_PROTOCOL_SMP;
> > + return 0;
> > +}
> > +
> > +/**
> > + * mpi3mr_add_host_phy - report sas_host phy to SAS transport
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_phy: Internal Phy object
> > + * @phy_pg0: SAS phy page 0
> > + * @parent_dev: Prent device class object
> > + *
> > + * Return: 0 for success, non-zero for failure.
> > + */
> > +static int mpi3mr_add_host_phy(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_phy *mr_sas_phy, struct mpi3_sas_phy_page0 phy_pg0,
> > + struct device *parent_dev)
> > +{
> > + struct sas_phy *phy;
> > + int phy_index = mr_sas_phy->phy_id;
> > +
> > +
> > + INIT_LIST_HEAD(&mr_sas_phy->port_siblings);
> > + phy = sas_phy_alloc(parent_dev, phy_index);
> > + if (!phy) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + return -1;
> > + }
> > + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle,
> > + &mr_sas_phy->identify))) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + sas_phy_free(phy);
> > + return -1;
> > + }
> > + phy->identify = mr_sas_phy->identify;
> > + mr_sas_phy->attached_handle = le16_to_cpu(phy_pg0.attached_dev_handle);
> > + if (mr_sas_phy->attached_handle)
> > + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle,
> > + &mr_sas_phy->remote_identify);
> > + phy->identify.phy_identifier = mr_sas_phy->phy_id;
> > + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate(
> > + (phy_pg0.negotiated_link_rate &
> > + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >>
> > + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT);
> > + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> > + phy_pg0.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK);
> > + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> > + phy_pg0.hw_link_rate >> 4);
> > + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate(
> > + phy_pg0.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK);
> > + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate(
> > + phy_pg0.programmed_link_rate >> 4);
> > + phy->hostdata = mr_sas_phy->hba_port;
> > +
> > + if ((sas_phy_add(phy))) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + sas_phy_free(phy);
> > + return -1;
> > + }
> > + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
> > + dev_info(&phy->dev,
> > + "add: handle(0x%04x), sas_address(0x%016llx)\n"
> > + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n",
> > + mr_sas_phy->handle, (unsigned long long)
> > + mr_sas_phy->identify.sas_address,
> > + mr_sas_phy->attached_handle,
> > + (unsigned long long)
> > + mr_sas_phy->remote_identify.sas_address);
> > + mr_sas_phy->phy = phy;
> > + return 0;
> > +}
> > +
> > +/**
> > + * mpi3mr_add_expander_phy - report expander phy to transport
> > + * @mrioc: Adapter instance reference
> > + * @mr_sas_phy: Internal Phy object
> > + * @expander_pg1: SAS Expander page 1
> > + * @parent_dev: Parent device class object
> > + *
> > + * Return: 0 for success, non-zero for failure.
> > + */
> > +static int mpi3mr_add_expander_phy(struct mpi3mr_ioc *mrioc,
> > + struct mpi3mr_sas_phy *mr_sas_phy,
> > + struct mpi3_sas_expander_page1 expander_pg1,
> > + struct device *parent_dev)
> > +{
> > + struct sas_phy *phy;
> > + int phy_index = mr_sas_phy->phy_id;
> > +
> > + INIT_LIST_HEAD(&mr_sas_phy->port_siblings);
> > + phy = sas_phy_alloc(parent_dev, phy_index);
> > + if (!phy) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + return -1;
> > + }
> > + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle,
> > + &mr_sas_phy->identify))) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + sas_phy_free(phy);
> > + return -1;
> > + }
> > + phy->identify = mr_sas_phy->identify;
> > + mr_sas_phy->attached_handle =
> > + le16_to_cpu(expander_pg1.attached_dev_handle);
> > + if (mr_sas_phy->attached_handle)
> > + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle,
> > + &mr_sas_phy->remote_identify);
> > + phy->identify.phy_identifier = mr_sas_phy->phy_id;
> > + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate(
> > + (expander_pg1.negotiated_link_rate &
> > + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >>
> > + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT);
> > + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> > + expander_pg1.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK);
> > + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate(
> > + expander_pg1.hw_link_rate >> 4);
> > + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate(
> > + expander_pg1.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK);
> > + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate(
> > + expander_pg1.programmed_link_rate >> 4);
> > + phy->hostdata = mr_sas_phy->hba_port;
> > +
> > + if ((sas_phy_add(phy))) {
> > + ioc_err(mrioc, "failure at %s:%d/%s()!\n",
> > + __FILE__, __LINE__, __func__);
> > + sas_phy_free(phy);
> > + return -1;
> > + }
> > + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
> > + dev_info(&phy->dev,
> > + "add: handle(0x%04x), sas_address(0x%016llx)\n"
> > + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n",
> > + mr_sas_phy->handle, (unsigned long long)
> > + mr_sas_phy->identify.sas_address,
> > + mr_sas_phy->attached_handle,
> > + (unsigned long long)
> > + mr_sas_phy->remote_identify.sas_address);
> > + mr_sas_phy->phy = phy;
> > + return 0;
> > +}
> > --
> > 2.27.0
> >
>
> --
> Himanshu Madhani Oracle Linux Engineering
>
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
