> On Jul 29, 2022, at 6:16 AM, Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx> wrote:
>
> Added helper functions to retrieve below controller's
> config pages,
> - SAS IOUnit Page0
> - SAS IOUnit Page1
> - Driver Page1
> - Device Page0
> - SAS Phy Page0
> - SAS Phy Page1
> - SAS Expander Page0
> - SAS Expander Page1
> - Enclosure Page0
>
> Also added the helper function to set the SAS IOUnit Page1.
>
> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
> ---
> drivers/scsi/mpi3mr/mpi3mr.h | 26 ++
> drivers/scsi/mpi3mr/mpi3mr_fw.c | 595 ++++++++++++++++++++++++++++++++
> 2 files changed, 621 insertions(+)
>
> diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
> index e15ad0e..8af94d3 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr.h
> +++ b/drivers/scsi/mpi3mr/mpi3mr.h
> @@ -1179,4 +1179,30 @@ void mpi3mr_app_save_logdata(struct mpi3mr_ioc *mrioc, char *event_data,
> u16 event_data_size);
> extern const struct attribute_group *mpi3mr_host_groups[];
> extern const struct attribute_group *mpi3mr_dev_groups[];
> +
> +int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec);
> +int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form,
> + u32 form_spec);
> +int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form,
> + u32 form_spec);
> +int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form,
> + u32 form_spec);
> +int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form,
> + u32 form_spec);
> +int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form,
> + u32 form_spec);
> +int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz);
> +int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
> +int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
> +int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_driver_page1 *driver_pg1, u16 pg_sz);
> #endif /*MPI3MR_H_INCLUDED*/
> diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> index da6eceb..50e88d4 100644
> --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
> +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
> @@ -5042,3 +5042,598 @@ out:
> mpi3mr_free_config_dma_memory(mrioc, &mem_desc);
> return retval;
> }
> +
> +/**
> + * mpi3mr_cfg_get_dev_pg0 - Read current device page0
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @dev_pg0: Pointer to return device page 0
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like device handle
> + *
> + * This is handler for config page read for a specific device
> + * page0. The ioc_status has the controller returned ioc_status.
> + * This routine doesn't check ioc_status to decide whether the
> + * page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(dev_pg0, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DEVICE;
> + cfg_req.page_number = 0;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "device page0 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "device page0 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_DEVICE_PGAD_FORM_MASK) |
> + (form_spec & MPI3_DEVICE_PGAD_HANDLE_MASK));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, dev_pg0, pg_sz)) {
> + ioc_err(mrioc, "device page0 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +
> +/**
> + * mpi3mr_cfg_get_sas_phy_pg0 - Read current SAS Phy page0
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @phy_pg0: Pointer to return SAS Phy page 0
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like phy number
> + *
> + * This is handler for config page read for a specific SAS Phy
> + * page0. The ioc_status has the controller returned ioc_status.
> + * This routine doesn't check ioc_status to decide whether the
> + * page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form,
> + u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(phy_pg0, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY;
> + cfg_req.page_number = 0;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "sas phy page0 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas phy page0 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) |
> + (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg0, pg_sz)) {
> + ioc_err(mrioc, "sas phy page0 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_get_sas_phy_pg1 - Read current SAS Phy page1
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @phy_pg1: Pointer to return SAS Phy page 1
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like phy number
> + *
> + * This is handler for config page read for a specific SAS Phy
> + * page1. The ioc_status has the controller returned ioc_status.
> + * This routine doesn't check ioc_status to decide whether the
> + * page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form,
> + u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(phy_pg1, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY;
> + cfg_req.page_number = 1;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "sas phy page1 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas phy page1 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) |
> + (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg1, pg_sz)) {
> + ioc_err(mrioc, "sas phy page1 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +
> +/**
> + * mpi3mr_cfg_get_sas_exp_pg0 - Read current SAS Expander page0
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @exp_pg0: Pointer to return SAS Expander page 0
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like device handle
> + *
> + * This is handler for config page read for a specific SAS
> + * Expander page0. The ioc_status has the controller returned
> + * ioc_status. This routine doesn't check ioc_status to decide
> + * whether the page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form,
> + u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(exp_pg0, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER;
> + cfg_req.page_number = 0;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "expander page0 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "expander page0 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) |
> + (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK |
> + MPI3_SAS_EXPAND_PGAD_HANDLE_MASK)));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg0, pg_sz)) {
> + ioc_err(mrioc, "expander page0 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_get_sas_exp_pg1 - Read current SAS Expander page1
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @exp_pg1: Pointer to return SAS Expander page 1
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like phy number
> + *
> + * This is handler for config page read for a specific SAS
> + * Expander page1. The ioc_status has the controller returned
> + * ioc_status. This routine doesn't check ioc_status to decide
> + * whether the page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form,
> + u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(exp_pg1, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER;
> + cfg_req.page_number = 1;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "expander page1 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "expander page1 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) |
> + (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK |
> + MPI3_SAS_EXPAND_PGAD_HANDLE_MASK)));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg1, pg_sz)) {
> + ioc_err(mrioc, "expander page1 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_get_enclosure_pg0 - Read current Enclosure page0
> + * @mrioc: Adapter instance reference
> + * @ioc_status: Pointer to return ioc status
> + * @encl_pg0: Pointer to return Enclosure page 0
> + * @pg_sz: Size of the memory allocated to the page pointer
> + * @form: The form to be used for addressing the page
> + * @form_spec: Form specific information like device handle
> + *
> + * This is handler for config page read for a specific Enclosure
> + * page0. The ioc_status has the controller returned ioc_status.
> + * This routine doesn't check ioc_status to decide whether the
> + * page read is success or not and it is the callers
> + * responsibility.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status,
> + struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form,
> + u32 form_spec)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u32 page_address;
> +
> + memset(encl_pg0, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_ENCLOSURE;
> + cfg_req.page_number = 0;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "enclosure page0 header read failed\n");
> + goto out_failed;
> + }
> + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "enclosure page0 header read failed with ioc_status(0x%04x)\n",
> + *ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> + page_address = ((form & MPI3_ENCLOS_PGAD_FORM_MASK) |
> + (form_spec & MPI3_ENCLOS_PGAD_HANDLE_MASK));
> + cfg_req.page_address = cpu_to_le32(page_address);
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, encl_pg0, pg_sz)) {
> + ioc_err(mrioc, "enclosure page0 read failed\n");
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +
> +/**
> + * mpi3mr_cfg_get_sas_io_unit_pg0 - Read current SASIOUnit page0
> + * @mrioc: Adapter instance reference
> + * @sas_io_unit_pg0: Pointer to return SAS IO Unit page 0
> + * @pg_sz: Size of the memory allocated to the page pointer
> + *
> + * This is handler for config page read for the SAS IO Unit
> + * page0. This routine checks ioc_status to decide whether the
> + * page read is success or not.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u16 ioc_status = 0;
> +
> + memset(sas_io_unit_pg0, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT;
> + cfg_req.page_number = 0;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "sas io unit page0 header read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page0 header read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg0, pg_sz)) {
> + ioc_err(mrioc, "sas io unit page0 read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page0 read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_get_sas_io_unit_pg1 - Read current SASIOUnit page1
> + * @mrioc: Adapter instance reference
> + * @sas_io_unit_pg1: Pointer to return SAS IO Unit page 1
> + * @pg_sz: Size of the memory allocated to the page pointer
> + *
> + * This is handler for config page read for the SAS IO Unit
> + * page1. This routine checks ioc_status to decide whether the
> + * page read is success or not.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u16 ioc_status = 0;
> +
> + memset(sas_io_unit_pg1, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT;
> + cfg_req.page_number = 1;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "sas io unit page1 header read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) {
> + ioc_err(mrioc, "sas io unit page1 read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page1 read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_set_sas_io_unit_pg1 - Write SASIOUnit page1
> + * @mrioc: Adapter instance reference
> + * @sas_io_unit_pg1: Pointer to the SAS IO Unit page 1 to write
> + * @pg_sz: Size of the memory allocated to the page pointer
> + *
> + * This is handler for config page write for the SAS IO Unit
> + * page1. This routine checks ioc_status to decide whether the
> + * page read is success or not. This will modify both current
> + * and persistent page.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u16 ioc_status = 0;
> +
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT;
> + cfg_req.page_number = 1;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "sas io unit page1 header read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_WRITE_CURRENT;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) {
> + ioc_err(mrioc, "sas io unit page1 write current failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page1 write current failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> +
> + cfg_req.action = MPI3_CONFIG_ACTION_WRITE_PERSISTENT;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) {
> + ioc_err(mrioc, "sas io unit page1 write persistent failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "sas io unit page1 write persistent failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> +
> +/**
> + * mpi3mr_cfg_get_driver_pg1 - Read current Driver page1
> + * @mrioc: Adapter instance reference
> + * @driver_pg1: Pointer to return Driver page 1
> + * @pg_sz: Size of the memory allocated to the page pointer
> + *
> + * This is handler for config page read for the Driver page1.
> + * This routine checks ioc_status to decide whether the page
> + * read is success or not.
> + *
> + * Return: 0 on success, non-zero on failure.
> + */
> +int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
> + struct mpi3_driver_page1 *driver_pg1, u16 pg_sz)
> +{
> + struct mpi3_config_page_header cfg_hdr;
> + struct mpi3_config_request cfg_req;
> + u16 ioc_status = 0;
> +
> + memset(driver_pg1, 0, pg_sz);
> + memset(&cfg_hdr, 0, sizeof(cfg_hdr));
> + memset(&cfg_req, 0, sizeof(cfg_req));
> +
> + cfg_req.function = MPI3_FUNCTION_CONFIG;
> + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER;
> + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER;
> + cfg_req.page_number = 1;
> + cfg_req.page_address = 0;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) {
> + ioc_err(mrioc, "driver page1 header read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "driver page1 header read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT;
> +
> + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr,
> + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg1, pg_sz)) {
> + ioc_err(mrioc, "driver page1 read failed\n");
> + goto out_failed;
> + }
> + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) {
> + ioc_err(mrioc, "driver page1 read failed with ioc_status(0x%04x)\n",
> + ioc_status);
> + goto out_failed;
> + }
> + return 0;
> +out_failed:
> + return -1;
> +}
> --
> 2.27.0
>
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
--
Himanshu Madhani Oracle Linux Engineering
