Hi, I'm having trouble getting the pm80xx driver to discover SATA drives. Enclosure has both SAS and SATA drives and the controller is Adaptec Device 8074 (rev 06) on x86_64 machine. Without ATA support in libsas, SAS drives alone are working correctly on 5.18. After enabling ATA support the driver started crashing. With scsi_mod.scan=sync and high loglevel for pm80xx I was able to perform a couple of commands before the kernel crashed. Applying "libsas and drivers: NCQ error handling" (https://patchwork.kernel.org/project/linux-scsi/list/?series=662216) series of patches prevents the driver from crashing but all operations are timing out. Bellow dmesg from the crashes. Thanks, Michal 5.19.0-rc8 with async scanning scsi_mod.scan=async ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ pm80xx 0000:06:00.0: pm80xx: driver version 0.1.40 :: pm8001_pci_alloc 532: Setting link rate to default value scsi host6: pm80xx sas: phy-6:0 added to port-6:0, phy_mask:0x1 (500e004abbbbbb7f) sas: DOING DISCOVERY on port 0, pid:38 sas: ex 500e004abbbbbb7f phy00:U:A attached: 500e004abbbbbb00 (stp) sas: ex 500e004abbbbbb7f phy01:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy02:U:A attached: 500e004abbbbbb02 (stp) sas: ex 500e004abbbbbb7f phy03:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy04:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy05:U:A attached: 500e004abbbbbb05 (stp) sas: ex 500e004abbbbbb7f phy06:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy07:U:A attached: 500e004abbbbbb07 (stp) sas: ex 500e004abbbbbb7f phy08:U:A attached: 500e004abbbbbb08 (stp) sas: ex 500e004abbbbbb7f phy09:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy10:U:A attached: 500e004abbbbbb0a (stp) sas: ex 500e004abbbbbb7f phy11:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy12:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy13:U:A attached: 500e004abbbbbb0d (stp) sas: ex 500e004abbbbbb7f phy14:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy15:U:A attached: 500e004abbbbbb0f (stp) sas: ex 500e004abbbbbb7f phy16:U:A attached: 500e004abbbbbb10 (stp) sas: ex 500e004abbbbbb7f phy17:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy18:U:A attached: 500e004abbbbbb12 (stp) sas: ex 500e004abbbbbb7f phy19:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy20:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy21:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy22:U:B attached: ffffffffffffffff (host) sas: ex 500e004abbbbbb7f phy23:U:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy24:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy25:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy26:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy27:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy28:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy29:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy30:U:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy31:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy32:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy33:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy34:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy35:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy36:D:B attached: 500e004abbbbbb7e (host+target) sas: Enter sas_scsi_recover_host busy: 0 failed: 0 sas: ata7: end_device-6:0:0: dev error handler sas: ata8: end_device-6:0:2: dev error handler sas: ata9: end_device-6:0:5: dev error handler sas: ata10: end_device-6:0:7: dev error handler sas: ata11: end_device-6:0:8: dev error handler sas: ata12: end_device-6:0:10: dev error handler sas: ata13: end_device-6:0:13: dev error handler sas: ata14: end_device-6:0:15: dev error handler sas: ata15: end_device-6:0:16: dev error handler sas: ata16: end_device-6:0:18: dev error handler ata11.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata8.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata7.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata9.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata10.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata15.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata15.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata15.00: Features: NCQ-sndrcv NCQ-prio ata15.00: configured for UDMA/133 ata16.00: qc timeout (cmd 0xec) ata14.00: qc timeout (cmd 0x27) ata12.00: qc timeout (cmd 0xec) ata13.00: qc timeout (cmd 0xec) ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata13.00: failed to IDENTIFY (I/O error, err_mask=0x4) pm80xx0:: mpi_sata_completion 2399: task or dev null ata16.00: failed to IDENTIFY (I/O error, err_mask=0x4) pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16395 status 0x1 tag 7 pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16393 status 0x1 tag 8 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb0f pm80xx0:: mpi_sata_completion 2765: task 0x00000000feaea166 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata14.00: failed to read native max address (err_mask=0x4) ata14.00: HPA support seems broken, skipping HPA handling pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16392 status 0x1 tag 6 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb12 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb0d pm80xx0:: mpi_sata_completion 2765: task 0x0000000092c2ba1c done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! pm80xx0:: mpi_sata_completion 2765: task 0x000000000861b6cc done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata16.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata14.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata13.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata16.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata16.00: Features: NCQ-sndrcv NCQ-prio ata14.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata14.00: Features: NCQ-sndrcv NCQ-prio ata13.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata13.00: Features: NCQ-sndrcv NCQ-prio ata14.00: configured for UDMA/133 ata13.00: configured for UDMA/133 ata11.00: qc timeout (cmd 0x2f) ata8.00: qc timeout (cmd 0x2f) ata9.00: qc timeout (cmd 0x2f) ata7.00: qc timeout (cmd 0x2f) ata10.00: qc timeout (cmd 0x2f) ata11.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata11.00: NCQ Send/Recv Log not supported ata11.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata11.00: failed to set xfermode (err_mask=0x40) ata7.00: Read log 0x13 page 0x00 failed, Emask 0x4 ata8.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata9.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata8.00: NCQ Send/Recv Log not supported ata8.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata8.00: NCQ Send/Recv Log not supported ata8.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata8.00: failed to set xfermode (err_mask=0x40) ata10.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata10.00: NCQ Send/Recv Log not supported ata10.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata10.00: NCQ Send/Recv Log not supported ata10.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata10.00: failed to set xfermode (err_mask=0x40) ata7.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata7.00: NCQ Send/Recv Log not supported ata7.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata7.00: failed to set xfermode (err_mask=0x40) ata9.00: failed to set xfermode (err_mask=0x40) ata12.00: qc timeout (cmd 0xec) ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata11.00: qc timeout (cmd 0x2f) ata8.00: qc timeout (cmd 0x2f) ata9.00: qc timeout (cmd 0x2f) ata7.00: qc timeout (cmd 0x2f) ata10.00: qc timeout (cmd 0x2f) pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16390 status 0x1 tag 2 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb08 pm80xx0:: mpi_sata_completion 2765: task 0x0000000022cdc277 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16387 status 0x1 tag 3 pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16388 status 0x1 tag 4 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb05 pm80xx0:: mpi_sata_completion 2765: task 0x000000006b9bef9f done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16386 status 0x1 tag 5 ata11.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata11.00: NCQ Send/Recv Log not supported ata11.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata11.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata11.00: Features: NCQ-sndrcv pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16389 status 0x1 tag 1 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb07 pm80xx0:: mpi_sata_completion 2765: task 0x00000000a19c8b91 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata11.00: failed to set xfermode (err_mask=0x40) pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb02 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb00 pm80xx0:: mpi_sata_completion 2765: task 0x00000000bfb098ed done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! pm80xx0:: mpi_sata_completion 2765: task 0x00000000c5b5a866 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata7.00: Read log 0x13 page 0x00 failed, Emask 0x4 ata8.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata9.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata8.00: NCQ Send/Recv Log not supported ata8.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata8.00: NCQ Send/Recv Log not supported ata8.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata8.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata8.00: failed to set xfermode (err_mask=0x40) ata10.00: Read log 0x00 page 0x00 failed, Emask 0x4 ata10.00: NCQ Send/Recv Log not supported ata10.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata10.00: NCQ Send/Recv Log not supported ata10.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata10.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata10.00: failed to set xfermode (err_mask=0x40) ata7.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata7.00: NCQ Send/Recv Log not supported ata7.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata7.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata7.00: failed to set xfermode (err_mask=0x40) ata9.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata9.00: failed to set xfermode (err_mask=0x40) ata12.00: qc timeout (cmd 0xec) pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16391 status 0x1 tag 10 ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb0a pm80xx0:: mpi_sata_completion 2765: task 0x00000000b1e970f8 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata10.00: configured for UDMA/133 ata7.00: configured for UDMA/133 ata9.00: configured for UDMA/133 ata16.00: qc timeout (cmd 0xef) root@(none) ata16.00: failed to set xfermode (err_mask=0x4) ata16.00: limiting speed to UDMA/133:PIO3 ata12.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata12.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata12.00: Features: NCQ-sndrcv NCQ-prio ata12.00: configured for UDMA/133 ata16.00: qc timeout (cmd 0xef) pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16395 status 0x1 tag 7 pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb12 pm80xx0:: mpi_sata_completion 2765: task 0x000000008b36b8fe done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata16.00: failed to set xfermode (err_mask=0x4) ata16.00: limiting speed to UDMA/133:PIO3 ata8.00: qc timeout (cmd 0xec) ata11.00: qc timeout (cmd 0x27) ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata11.00: failed to read native max address (err_mask=0x4) ata11.00: HPA support seems broken, skipping HPA handling ata11.00: revalidation failed (errno=-5) ata8.00: revalidation failed (errno=-5) general protection fault, probably for non-canonical address 0xfec03cb3fec337d7: 0000 [#1] PREEMPT SMP CPU: 3 PID: 62 Comm: kworker/3:2 Not tainted 5.19.0-rc8 #1 Workqueue: events_power_efficient neigh_periodic_work RIP: 0010:queued_spin_lock_slowpath+0x24d/0x290 Code: 8b 0a 48 85 c9 74 f6 e9 ed fe ff ff c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 04 48 63 c9 48 05 80 fc 02 00 48 03 04 cd 80 d8 79 82 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 a RSP: 0018:ffffc90000174e50 EFLAGS: 00010086 RAX: fec03cb3fec337d7 RBX: ffff888436c74330 RCX: 0000000000000db0 RDX: ffff88843fdafc80 RSI: ffffffff826b1de1 RDI: ffffffff826bcf6d RBP: ffff88843fdafc80 R08: 0000000000000020 R09: 0000000436c79380 R10: 000000000000002c R11: ffffc90000174cf0 R12: 0000000000100000 R13: 0000000000100000 R14: 0000000000000000 R15: ffff888436063c00 FS: 0000000000000000(0000) GS:ffff88843fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000241000 CR3: 0000000102a1e001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x34/0x40 complete+0x18/0x50 process_oq+0x901/0x1fa0 [pm80xx] ? enqueue_task_fair+0x93/0x5d0 pm80xx_chip_isr+0x2d/0x90 [pm80xx] tasklet_action_common.isra.22+0x12d/0x130 __do_softirq+0xe2/0x2c3 do_softirq+0x79/0x90 </IRQ> <TASK> __local_bh_enable_ip+0x66/0x70 process_one_work+0x1ee/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x2a/0x3b0 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: pm80xx(+) libsas scsi_transport_sas loop tg3 virtio_rng virtio_net net_failover failover ---[ end trace 0000000000000000 ]--- RIP: 0010:queued_spin_lock_slowpath+0x24d/0x290 Code: 8b 0a 48 85 c9 74 f6 e9 ed fe ff ff c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 04 48 63 c9 48 05 80 fc 02 00 48 03 04 cd 80 d8 79 82 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 a RSP: 0018:ffffc90000174e50 EFLAGS: 00010086 RAX: fec03cb3fec337d7 RBX: ffff888436c74330 RCX: 0000000000000db0 RDX: ffff88843fdafc80 RSI: ffffffff826b1de1 RDI: ffffffff826bcf6d RBP: ffff88843fdafc80 R08: 0000000000000020 R09: 0000000436c79380 R10: 000000000000002c R11: ffffc90000174cf0 R12: 0000000000100000 R13: 0000000000100000 R14: 0000000000000000 R15: ffff888436063c00 FS: 0000000000000000(0000) GS:ffff88843fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000241000 CR3: 0000000102a1e001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 5.19.0-rc8 scsi_mod.scan=sync ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ pm80xx0:: mpi_sata_completion 2765: task 0x000000002e58d403 done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! ata14.00: failed to IDENTIFY (I/O error, err_mask=0x4) pm80xx0:: mpi_sata_completion 2408: IO failed device_id 16390 status 0x1 tag 2 ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4) pm80xx0:: mpi_sata_completion 2444: SAS Address of IO Failure Drive:ffffffff0000001e pm80xx0:: mpi_sata_completion 2449: SAS Address of IO Failure Drive:500e004abbbbbb08 pm80xx0:: mpi_sata_completion 2765: task 0x00000000ee89111a done with io_status 0x1 resp 0x0 stat 0x8c but aborted by upper layer! BUG: unable to handle page fault for address: ffffffff8107b530 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 43de0b067 P4D 43de0b067 PUD 43de0c063 PMD 43c0001e1 Oops: 0003 [#1] PREEMPT SMP CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.19.0-rc8 #1 RIP: 0010:queued_spin_lock_slowpath+0x24d/0x290 Code: 8b 0a 48 85 c9 74 f6 e9 ed fe ff ff c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 04 48 63 c9 48 05 80 fc 02 00 48 03 04 cd 80 d8 79 82 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 a RSP: 0018:ffffc90000174de8 EFLAGS: 00010086 RAX: ffffffff8107b530 RBX: ffff888102a62630 RCX: 00000000000000a8 RDX: ffff88843fdafc80 RSI: ffffffff826b1de1 RDI: ffffffff826bcf6d RBP: ffff88843fdafc80 R08: 0000000000000020 R09: 000000043792cac0 R10: 000000000000002c R11: 0000000000000000 R12: 0000000000100000 R13: 0000000000100000 R14: 0000000000000001 R15: ffff888436003c00 FS: 0000000000000000(0000) GS:ffff88843fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8107b530 CR3: 0000000436f2d005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x34/0x40 complete+0x18/0x50 mpi_sata_completion+0x12d/0x780 [pm80xx] process_oq+0x901/0x1fa0 [pm80xx] ? _raw_spin_unlock_irqrestore+0x1b/0x30 ? try_to_wake_up+0x93/0x590 pm80xx_chip_isr+0x2d/0x90 [pm80xx] tasklet_action_common.isra.22+0x12d/0x130 __do_softirq+0xe2/0x2c3 irq_exit_rcu+0x8d/0xc0 common_interrupt+0xb9/0xd0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:cpuidle_enter_state+0xc2/0x370 Code: 48 89 c5 0f 1f 44 00 00 31 ff e8 a9 5f 6e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 6a 02 00 00 31 ff e8 c2 9a 73 ff fb 45 85 f6 <0f> 88 1a 01 00 00 49 63 d6 48 2b 2c 24 48 6b ca 8 RSP: 0018:ffffc900000efe90 EFLAGS: 00000202 RAX: ffff88843fd80000 RBX: ffffe8ffffd81700 RCX: 000000000000001f RDX: 00000014a764207f RSI: ffffffff826b1de1 RDI: ffffffff826bcf6d RBP: 00000014a764207f R08: 0000000000000004 R09: 000000000002e840 R10: 0003fcb078c01faf R11: ffff88843fdadf84 R12: 0000000000000002 R13: ffffffff8361ee60 R14: 0000000000000002 R15: 0000000000000000 cpuidle_enter+0x29/0x40 do_idle+0x1cd/0x210 cpu_startup_entry+0x19/0x20 start_secondary+0xf5/0x120 secondary_startup_64_no_verify+0xd3/0xdb </TASK> Modules linked in: pm80xx(+) libsas scsi_transport_sas loop tg3 virtio_rng virtio_net net_failover failover CR2: ffffffff8107b530 ---[ end trace 0000000000000000 ]--- RIP: 0010:queued_spin_lock_slowpath+0x24d/0x290 Code: 8b 0a 48 85 c9 74 f6 e9 ed fe ff ff c1 e9 12 83 e0 03 83 e9 01 48 c1 e0 04 48 63 c9 48 05 80 fc 02 00 48 03 04 cd 80 d8 79 82 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 a RSP: 0018:ffffc90000174de8 EFLAGS: 00010086 RAX: ffffffff8107b530 RBX: ffff888102a62630 RCX: 00000000000000a8 RDX: ffff88843fdafc80 RSI: ffffffff826b1de1 RDI: ffffffff826bcf6d RBP: ffff88843fdafc80 R08: 0000000000000020 R09: 000000043792cac0 R10: 000000000000002c R11: 0000000000000000 R12: 0000000000100000 R13: 0000000000100000 R14: 0000000000000001 R15: ffff888436003c00 FS: 0000000000000000(0000) GS:ffff88843fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8107b530 CR3: 0000000436f2d005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception in interrupt 5.19 + libsas and drivers: NCQ error handling patchset ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ pm80xx 0000:06:00.0: pm80xx: driver version 0.1.40 :: pm8001_pci_alloc 532: Setting link rate to default value scsi host6: pm80xx sas: phy-6:0 added to port-6:0, phy_mask:0x1 (500e004abbbbbb7f) sas: DOING DISCOVERY on port 0, pid:39 sas: ex 500e004abbbbbb7f phy00:U:A attached: 500e004abbbbbb00 (stp) sas: ex 500e004abbbbbb7f phy01:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy02:U:A attached: 500e004abbbbbb02 (stp) sas: ex 500e004abbbbbb7f phy03:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy04:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy05:U:A attached: 500e004abbbbbb05 (stp) sas: ex 500e004abbbbbb7f phy06:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy07:U:A attached: 500e004abbbbbb07 (stp) sas: ex 500e004abbbbbb7f phy08:U:A attached: 500e004abbbbbb08 (stp) sas: ex 500e004abbbbbb7f phy09:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy10:U:A attached: 500e004abbbbbb0a (stp) sas: ex 500e004abbbbbb7f phy11:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy12:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy13:U:A attached: 500e004abbbbbb0d (stp) sas: ex 500e004abbbbbb7f phy14:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy15:U:A attached: 500e004abbbbbb0f (stp) sas: ex 500e004abbbbbb7f phy16:U:A attached: 500e004abbbbbb10 (stp) sas: ex 500e004abbbbbb7f phy17:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy18:U:A attached: 500e004abbbbbb12 (stp) sas: ex 500e004abbbbbb7f phy19:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy20:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy21:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy22:U:B attached: ffffffffffffffff (host) sas: ex 500e004abbbbbb7f phy23:U:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy24:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy25:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy26:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy27:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy28:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy29:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy30:U:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy31:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy32:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy33:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy34:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy35:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy36:D:B attached: 500e004abbbbbb7e (host+target) sas: Enter sas_scsi_recover_host busy: 0 failed: 0 sas: ata7: end_device-6:0:0: dev error handler sas: ata8: end_device-6:0:2: dev error handler sas: ata9: end_device-6:0:5: dev error handler sas: ata10: end_device-6:0:7: dev error handler sas: ata11: end_device-6:0:8: dev error handler sas: ata12: end_device-6:0:10: dev error handler sas: ata13: end_device-6:0:13: dev error handler sas: ata14: end_device-6:0:15: dev error handler sas: ata15: end_device-6:0:16: dev error handler sas: ata16: end_device-6:0:18: dev error handler ata11.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata13.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata9.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata11.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata11.00: Features: NCQ-sndrcv NCQ-prio ata9.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata9.00: Features: NCQ-sndrcv NCQ-prio ata9.00: configured for UDMA/133 ata7.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata7.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata7.00: Features: NCQ-sndrcv NCQ-prio ata15.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata15.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata15.00: Features: NCQ-sndrcv NCQ-prio ata7.00: configured for UDMA/133 ata15.00: configured for UDMA/133 ata13.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata13.00: Features: NCQ-sndrcv NCQ-prio ata11.00: configured for UDMA/133 ata13.00: configured for UDMA/133 ata8.00: qc timeout (cmd 0x27) ata12.00: qc timeout (cmd 0xec) ata14.00: qc timeout (cmd 0xec) ata16.00: qc timeout (cmd 0x27) ata10.00: qc timeout (cmd 0xec) pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 6 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 3 ata16.00: failed to read native max address (err_mask=0x4) pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 4 ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata14.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata8.00: failed to read native max address (err_mask=0x4) pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 7 ata8.00: HPA support seems broken, skipping HPA handling pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 2 ata16.00: HPA support seems broken, skipping HPA handling ata8.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata14.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata10.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata14.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata14.00: Features: NCQ-sndrcv NCQ-prio ata10.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata10.00: Features: NCQ-sndrcv NCQ-prio ata14.00: configured for UDMA/133 ata16.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata16.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata16.00: Features: NCQ-sndrcv NCQ-prio ata12.00: ATA-9: HUH721010ALN600, LHGNT290, max UDMA/133 ata12.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata12.00: Features: NCQ-sndrcv NCQ-prio ata16.00: configured for UDMA/133 ata8.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32) ata8.00: Features: NCQ-sndrcv NCQ-prio ata12.00: configured for UDMA/133 ata8.00: configured for UDMA/133 ata10.00: qc timeout (cmd 0x2f) pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 2 ata10.00: Read log 0x12 page 0x00 failed, Emask 0x4 ata10.00: Read log 0x00 page 0x00 failed, Emask 0x40 ata10.00: configured for UDMA/133 ata10.00: configured for UDMA/133 sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 scsi 6:0:0:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes scsi 6:0:1:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:1:0: [sdc] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:1:0: [sdc] Write Protect is off sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00 sd 6:0:1:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA scsi 6:0:2:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:1:0: [sdc] Preferred minimum I/O size 4096 bytes sd 6:0:2:0: [sdd] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:2:0: [sdd] Write Protect is off sd 6:0:2:0: [sdd] Mode Sense: 00 3a 00 00 sd 6:0:2:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:2:0: [sdd] Preferred minimum I/O size 4096 bytes scsi 6:0:3:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:3:0: [sde] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:3:0: [sde] Write Protect is off sd 6:0:3:0: [sde] Mode Sense: 00 3a 00 00 sd 6:0:3:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:3:0: [sde] Preferred minimum I/O size 4096 bytes scsi 6:0:4:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:4:0: [sdf] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:4:0: [sdf] Write Protect is off sd 6:0:4:0: [sdf] Mode Sense: 00 3a 00 00 sd 6:0:4:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:4:0: [sdf] Preferred minimum I/O size 4096 bytes scsi 6:0:5:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:5:0: [sdg] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:5:0: [sdg] Write Protect is off sd 6:0:5:0: [sdg] Mode Sense: 00 3a 00 00 sd 6:0:5:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:5:0: [sdg] Preferred minimum I/O size 4096 bytes scsi 6:0:6:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:6:0: [sdh] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:6:0: [sdh] Write Protect is off sd 6:0:6:0: [sdh] Mode Sense: 00 3a 00 00 sd 6:0:6:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:6:0: [sdh] Preferred minimum I/O size 4096 bytes scsi 6:0:7:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:7:0: [sdi] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:7:0: [sdi] Write Protect is off sd 6:0:7:0: [sdi] Mode Sense: 00 3a 00 00 sd 6:0:7:0: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:7:0: [sdi] Preferred minimum I/O size 4096 bytes scsi 6:0:8:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:8:0: [sdj] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:8:0: [sdj] Write Protect is off sd 6:0:8:0: [sdj] Mode Sense: 00 3a 00 00 sd 6:0:8:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:8:0: [sdj] Preferred minimum I/O size 4096 bytes scsi 6:0:9:0: Direct-Access ATA HUH721010ALN600 T290 PQ: 0 ANSI: 5 sd 6:0:9:0: [sdk] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB) sd 6:0:9:0: [sdk] Write Protect is off sd 6:0:9:0: [sdk] Mode Sense: 00 3a 00 00 sd 6:0:9:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:9:0: [sdk] Preferred minimum I/O size 4096 bytes scsi 6:0:10:0: Enclosure EMC ESES Enclosure 0001 PQ: 0 ANSI: 6 scsi 6:0:10:0: Power-on or device reset occurred sas: DONE DISCOVERY on port 0, pid:39, result:0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phy00 change count has changed sas: ex 500e004abbbbbb7f phy00 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy00 sas: ex 500e004abbbbbb7f phy00 broadcast flutter sas: ex 500e004abbbbbb7f phy02 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy02 sas: ex 500e004abbbbbb7f phy02 broadcast flutter sas: ex 500e004abbbbbb7f phy05 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy05 sas: ex 500e004abbbbbb7f phy05 broadcast flutter sas: ex 500e004abbbbbb7f phy07 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy07 sas: ex 500e004abbbbbb7f phy07 broadcast flutter sas: ex 500e004abbbbbb7f phy08 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy08 sas: ex 500e004abbbbbb7f phy08 broadcast flutter sas: ex 500e004abbbbbb7f phy10 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy10 sas: ex 500e004abbbbbb7f phy10 broadcast flutter sas: ex 500e004abbbbbb7f phy13 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy13 sas: ex 500e004abbbbbb7f phy13 broadcast flutter sas: ex 500e004abbbbbb7f phy15 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy15 sas: ex 500e004abbbbbb7f phy15 broadcast flutter sas: ex 500e004abbbbbb7f phy16 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy16 sas: ex 500e004abbbbbb7f phy16 broadcast flutter sas: ex 500e004abbbbbb7f phy18 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f rediscovering phy18 sas: ex 500e004abbbbbb7f phy18 broadcast flutter sas: ex 500e004abbbbbb7f phy23 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f phy23 new device attached sas: ex 500e004abbbbbb7f phy23:U:B attached: ffffffffffffffff (host) sas: YOLO ignoring (0x1) attached to ex 500e004abbbbbb7f phy23 sas: ex 500e004abbbbbb7f phy30 originated BROADCAST(CHANGE) sas: ex 500e004abbbbbb7f phy30 new device attached sas: ex 500e004abbbbbb7f phy30:U:B attached: ffffffffffffffff (host) sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: phy1 matched wide port0 sas: phy-6:1 added to port-6:0, phy_mask:0x3 (500e004abbbbbb7f) sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: phy-6:2 added to port-6:1, phy_mask:0x4 (5002538a67b05e82) sas: DOING DISCOVERY on port 1, pid:39 scsi 6:0:11:0: Direct-Access SAMSUNG PA35N400 EMC400 EQL3 PQ: 0 ANSI: 6 scsi 6:0:11:0: Power-on or device reset occurred sas: DONE DISCOVERY on port 1, pid:39, result:0 sas: phy3 matched wide port0 sas: phy-6:3 added to port-6:0, phy_mask:0xb (500e004abbbbbb7f) sas: REVALIDATING DOMAIN on port 0, pid:39 sd 6:0:11:0: [sdl] 781250000 512-byte logical blocks: (400 GB/373 GiB) sd 6:0:11:0: [sdl] 4096-byte physical blocks sd 6:0:11:0: [sdl] Write Protect is off sd 6:0:11:0: [sdl] Mode Sense: b7 00 10 08 sd 6:0:11:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 6:0:11:0: [sdl] Preferred minimum I/O size 8192 bytes sd 6:0:11:0: [sdl] Optimal transfer size 8192 bytes sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: broadcast received: 9 sas: REVALIDATING DOMAIN on port 0, pid:39 sdl: sdl1 sdl2 sdl3 sd 6:0:11:0: [sdl] Attached SCSI disk sas: ex 500e004abbbbbb7f phys DID NOT change sas: done REVALIDATING DOMAIN on port 0, pid:39, res 0x0 sas: phy-6:4 added to port-6:2, phy_mask:0x10 (500e004abbbbbb7f) sas: DOING DISCOVERY on port 2, pid:39 sas: ex 500e004abbbbbb7f phy00:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy01:U:A attached: 500e004abbbbbb01 (stp) sas: ex 500e004abbbbbb7f phy02:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy03:U:A attached: 500e004abbbbbb03 (stp) sas: ex 500e004abbbbbb7f phy04:U:A attached: 500e004abbbbbb04 (stp) sas: ex 500e004abbbbbb7f phy05:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy06:U:A attached: 500e004abbbbbb06 (stp) sas: ex 500e004abbbbbb7f phy07:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy08:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy09:U:A attached: 500e004abbbbbb09 (stp) sas: ex 500e004abbbbbb7f phy10:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy11:U:A attached: 500e004abbbbbb0b (stp) sas: ex 500e004abbbbbb7f phy12:U:A attached: 500e004abbbbbb0c (stp) sas: ex 500e004abbbbbb7f phy13:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy14:U:A attached: 500e004abbbbbb0e (stp) sas: ex 500e004abbbbbb7f phy15:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy16:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy17:U:A attached: 500e004abbbbbb11 (stp) sas: ex 500e004abbbbbb7f phy18:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy19:U:A attached: 500e004abbbbbb13 (stp) sas: ex 500e004abbbbbb7f phy20:U:B attached: ffffffffffffffff (host) sas: ex 500e004abbbbbb7f phy21:U:B attached: ffffffffffffffff (host) sas: ex 500e004abbbbbb7f phy22:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy23:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy24:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy25:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy26:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy27:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy28:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy29:U:B attached: ffffffffffffffff (host) sas: ex 500e004abbbbbb7f phy30:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy31:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy32:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy33:U:1 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy34:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy35:D:0 attached: 0000000000000000 (no device) sas: ex 500e004abbbbbb7f phy36:D:B attached: 500e004abbbbbb7e (host+target) sas: Enter sas_scsi_recover_host busy: 10 failed: 10 sas: trying to find task 0x000000006ab59d02 sas: sas_scsi_find_task: aborting task 0x000000006ab59d02 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 10 sas: sas_scsi_find_task: task 0x000000006ab59d02 is aborted sas: sas_eh_handle_sas_errors: task 0x000000006ab59d02 is aborted sas: trying to find task 0x00000000ad5c9920 sas: sas_scsi_find_task: aborting task 0x00000000ad5c9920 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 9 sas: sas_scsi_find_task: task 0x00000000ad5c9920 is aborted sas: sas_eh_handle_sas_errors: task 0x00000000ad5c9920 is aborted sas: trying to find task 0x0000000016de78fe sas: sas_scsi_find_task: aborting task 0x0000000016de78fe pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 8 sas: sas_scsi_find_task: task 0x0000000016de78fe is aborted sas: sas_eh_handle_sas_errors: task 0x0000000016de78fe is aborted sas: trying to find task 0x000000003941a640 sas: sas_scsi_find_task: aborting task 0x000000003941a640 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 4 sas: sas_scsi_find_task: task 0x000000003941a640 is aborted sas: sas_eh_handle_sas_errors: task 0x000000003941a640 is aborted sas: trying to find task 0x000000005ee644eb sas: sas_scsi_find_task: aborting task 0x000000005ee644eb pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 6 sas: sas_scsi_find_task: task 0x000000005ee644eb is aborted sas: sas_eh_handle_sas_errors: task 0x000000005ee644eb is aborted sas: trying to find task 0x0000000031596591 sas: sas_scsi_find_task: aborting task 0x0000000031596591 sas: sas_scsi_find_task: task 0x0000000031596591 is aborted pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 7 sas: sas_eh_handle_sas_errors: task 0x0000000031596591 is aborted sas: trying to find task 0x00000000e44cf332 sas: sas_scsi_find_task: aborting task 0x00000000e44cf332 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 5 sas: sas_scsi_find_task: task 0x00000000e44cf332 is aborted sas: sas_eh_handle_sas_errors: task 0x00000000e44cf332 is aborted sas: trying to find task 0x0000000079c3e651 sas: sas_scsi_find_task: aborting task 0x0000000079c3e651 sas: sas_scsi_find_task: task 0x0000000079c3e651 is aborted pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 3 sas: sas_eh_handle_sas_errors: task 0x0000000079c3e651 is aborted sas: trying to find task 0x000000006c04ed70 sas: sas_scsi_find_task: aborting task 0x000000006c04ed70 sas: sas_scsi_find_task: task 0x000000006c04ed70 is aborted pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 2 sas: sas_eh_handle_sas_errors: task 0x000000006c04ed70 is aborted sas: trying to find task 0x00000000f1ab9a49 sas: sas_scsi_find_task: aborting task 0x00000000f1ab9a49 pm80xx0:: mpi_sata_completion 2287: task null, freeing CCB tag 1 sas: sas_scsi_find_task: task 0x00000000f1ab9a49 is aborted sas: sas_eh_handle_sas_errors: task 0x00000000f1ab9a49 is aborted sas: ata16: end_device-6:0:18: cmd error handler sas: ata15: end_device-6:0:16: cmd error handler sas: ata14: end_device-6:0:15: cmd error handler sas: ata10: end_device-6:0:7: cmd error handler sas: ata12: end_device-6:0:10: cmd error handler sas: ata13: end_device-6:0:13: cmd error handler sas: ata11: end_device-6:0:8: cmd error handler sas: ata9: end_device-6:0:5: cmd error handler sas: ata8: end_device-6:0:2: cmd error handler sas: ata7: end_device-6:0:0: cmd error handler sas: ata7: end_device-6:0:0: dev error handler sas: ata8: end_device-6:0:2: dev error handler ata7.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6 frozen ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen sas: ata9: end_device-6:0:5: dev error handler ata9.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6 frozen ata9.00: failed command: READ FPDMA QUEUED ata9.00: cmd 60/01:00:00:00:00/00:00:00:00:00/40 tag 25 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata9.00: status: { DRDY } ata9: hard resetting link sas: ata10: end_device-6:0:7: dev error handler ata10.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen ata10.00: failed command: READ FPDMA QUEUED ata10.00: cmd 60/01:00:00:00:00/00:00:00:00:00/40 tag 8 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata10.00: status: { DRDY } ata10: hard resetting link sas: ata11: end_device-6:0:8: dev error handler ata11.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6 frozen ata11.00: failed command: READ FPDMA QUEUED ata11.00: cmd 60/01:00:00:00:00/00:00:00:00:00/40 tag 14 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata11.00: status: { DRDY } ata11: hard resetting link sas: ata12: end_device-6:0:10: dev error handler ata12.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen ata12.00: failed command: READ FPDMA QUEUED ata12.00: cmd 60/01:00:00:00:00/00:00:00:00:00/40 tag 0 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata12.00: status: { DRDY } ata12: hard resetting link sas: ata13: end_device-6:0:13: dev error handler ata13.00: exception Emask 0x0 SAct 0x10000000 SErr 0x0 action 0x6 frozen ata13.00: failed command: READ FPDMA QUEUED ata13.00: cmd 60/01:00:00:00:00/00:00:00:00:00/40 tag 28 ncq dma 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata13.00: status: { DRDY } ata13: hard resetting link
