As reported in [0], the pm8001 driver NCQ error handling more or less duplicates what libata does in link error handling, as follows: - abort all commands - do autopsy with read log ext 10 command - reset the target to recover Indeed for the hisi_sas driver we want to add similar handling for NCQ errors. This series add a new libsas API - sas_ata_link_abort() - to handle host NCQ errors, and fixes up pm8001 and hisi_sas drivers to use it. As mentioned in the pm8001 changeover patch, I would prefer a better place to locate the SATA ABORT command (rather that nexus reset callback). I would appreciate some testing of the pm8001 change as the read log ext10 command mostly hangs on my arm64 machine - these arm64 hangs are a known issue. Finally with these changes we can make the libsas task alloc/free APIs private, which they should always have been. Based on v5.19-rc6 [0] https://lore.kernel.org/linux-scsi/8fb3b093-55f0-1fab-81f4-e8519810a978@xxxxxxxxxx/ John Garry (5): scsi: pm8001: Modify task abort handling for SATA task scsi: libsas: Add sas_ata_link_abort() scsi: pm8001: Use sas_ata_link_abort() to handle NCQ errors scsi: hisi_sas: Don't issue ATA softreset in hisi_sas_abort_task() scsi: libsas: Make sas_{alloc, alloc_slow, free}_task() private Xingui Yang (1): scsi: hisi_sas: Add SATA_DISK_ERR bit handling for v3 hw drivers/scsi/hisi_sas/hisi_sas_main.c | 5 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 22 ++- drivers/scsi/libsas/sas_ata.c | 10 ++ drivers/scsi/libsas/sas_init.c | 3 - drivers/scsi/libsas/sas_internal.h | 4 + drivers/scsi/pm8001/pm8001_hwi.c | 194 +++++++------------------ drivers/scsi/pm8001/pm8001_sas.c | 13 ++ drivers/scsi/pm8001/pm8001_sas.h | 8 +- drivers/scsi/pm8001/pm80xx_hwi.c | 177 ++-------------------- include/scsi/libsas.h | 4 - include/scsi/sas_ata.h | 5 + 11 files changed, 132 insertions(+), 313 deletions(-) -- 2.35.3
