[PATCH AUTOSEL 5.18 51/54] scsi: pm80xx: Fix 'Unknown' max/min linkrate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Changyuan Lyu <changyuanl@xxxxxxxxxx>

[ Upstream commit e78276cadb669d3e55cffe66bd166ff3c8572e38 ]

Currently, the data flow of the max/min linkrate in the driver is

 * in pm8001_get_lrate_mode():
   hardcoded value ==> struct sas_phy

 * in pm8001_bytes_dmaed():
   struct pm8001_phy ==> struct sas_phy

 * in pm8001_phy_control():
   libsas data ==> struct pm8001_phy

Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields
in struct pm8001_phy are not initialized, sysfs
`/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`.

To fix the issue, change the dataflow to the following:

 * in pm8001_phy_init():
   initial value ==> struct pm8001_phy

 * in pm8001_get_lrate_mode():
   struct pm8001_phy ==> struct sas_phy

 * in pm8001_phy_control():
   libsas data ==> struct pm8001_phy

For negotiated linkrate, the current dataflow is:

 * in pm8001_get_lrate_mode():
   iomb data ==> struct asd_sas_phy ==> struct sas_phy

 * in pm8001_bytes_dmaed():
   struct asd_sas_phy ==> struct sas_phy

Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment
statements in pm8001_bytes_dmaed() are unnecessary and cleaned up.

Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@xxxxxxxxxx
Reviewed-by: Igor Pylypiv <ipylypiv@xxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxx>
Signed-off-by: Changyuan Lyu <changyuanl@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_hwi.c  | 19 +++----------------
 drivers/scsi/pm8001/pm8001_init.c |  2 ++
 2 files changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index f7466a895d3b..991eb01bb1e0 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3145,15 +3145,6 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
 	if (!phy->phy_attached)
 		return;
 
-	if (sas_phy->phy) {
-		struct sas_phy *sphy = sas_phy->phy;
-		sphy->negotiated_linkrate = sas_phy->linkrate;
-		sphy->minimum_linkrate = phy->minimum_linkrate;
-		sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		sphy->maximum_linkrate = phy->maximum_linkrate;
-		sphy->maximum_linkrate_hw = phy->maximum_linkrate;
-	}
-
 	if (phy->phy_type & PORT_TYPE_SAS) {
 		struct sas_identify_frame *id;
 		id = (struct sas_identify_frame *)phy->frame_rcvd;
@@ -3177,26 +3168,22 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
 	switch (link_rate) {
 	case PHY_SPEED_120:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS;
 		break;
 	case PHY_SPEED_60:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
 		break;
 	case PHY_SPEED_30:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 		break;
 	case PHY_SPEED_15:
 		phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
-		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
 		break;
 	}
 	sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
-	sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+	sas_phy->maximum_linkrate_hw = phy->maximum_linkrate;
 	sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-	sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
-	sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	sas_phy->maximum_linkrate = phy->maximum_linkrate;
+	sas_phy->minimum_linkrate = phy->minimum_linkrate;
 }
 
 /**
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 9b04f1a6a67d..01f2f41928eb 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -143,6 +143,8 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
 	phy->phy_state = PHY_LINK_DISABLE;
 	phy->pm8001_ha = pm8001_ha;
+	phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+	phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
 	sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
 	sas_phy->class = SAS;
 	sas_phy->iproto = SAS_PROTOCOL_ALL;
-- 
2.35.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux