[PATCH v2 4/4] target: Properly set Sense data length when copy sense

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The transport_get_sense_buffer() sets sense data length to be the
allocated sense buffer length TRANSPORT_SENSE_BUFFER. However, the sense
data length is depending on the sense data description. Check the sense
data for cmd->scsi_sense_length.

See SPC4-R37 section 4.5.2.1.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
---
 Changes in v2:
 - Only memcpy sense data length rather than the entire TRANSPORT_SENSE_BUFFER.

 drivers/target/target_core_transport.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index db53b326048d..95b7788e7cbc 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -771,8 +771,6 @@ static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd)
 	if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION)
 		return NULL;
 
-	cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER;
-
 	pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n",
 		dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status);
 	return cmd->sense_buffer;
@@ -791,6 +789,11 @@ void transport_copy_sense_to_cmd(struct se_cmd *cmd, unsigned char *sense)
 	}
 
 	cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE;
+
+	/* Sense data length = min sense data + additional sense data length */
+	cmd->scsi_sense_length = min_t(u16, cmd_sense_buf[7] + 8,
+				       TRANSPORT_SENSE_BUFFER);
+
 	memcpy(cmd_sense_buf, sense, cmd->scsi_sense_length);
 	spin_unlock_irqrestore(&cmd->t_state_lock, flags);
 }
-- 
2.28.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux