From: Xingui Yang <yangxingui@xxxxxxxxxx>
If the I/O completion response frame returned by the target device has been
written to the host memory and the err bit in the status field of the
received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will
let EH analyze and further determine cause of failure.
Signed-off-by: Xingui Yang <yangxingui@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 4d3eb53a8209..efe8c5be5870 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -481,6 +481,9 @@ struct hisi_sas_err_record_v3 {
#define RX_DATA_LEN_UNDERFLOW_OFF 6
#define RX_DATA_LEN_UNDERFLOW_MSK (1 << RX_DATA_LEN_UNDERFLOW_OFF)
+#define RX_FIS_STATUS_ERR_OFF 0
+#define RX_FIS_STATUS_ERR_MSK (1 << RX_FIS_STATUS_ERR_OFF)
+
#define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096
#define HISI_SAS_MSI_COUNT_V3_HW 32
@@ -2161,6 +2164,7 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
hisi_sas_status_buf_addr_mem(slot);
u32 dma_rx_err_type = le32_to_cpu(record->dma_rx_err_type);
u32 trans_tx_fail_type = le32_to_cpu(record->trans_tx_fail_type);
+ u16 sipc_rx_err_type = le16_to_cpu(record->sipc_rx_err_type);
u32 dw3 = le32_to_cpu(complete_hdr->dw3);
switch (task->task_proto) {
@@ -2188,7 +2192,10 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
+ if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
+ (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
+ ts->stat = SAS_PROTO_RESPONSE;
+ } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
--
2.35.3
