Re: [PATCH 2/3] scsi_debug: Make the READ CAPACITY response compliant with ZBC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/12/22 08:00, Bart Van Assche wrote:
> From ZBC-1:
> * RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
>   highest LBA of a contiguous range of zones that are not sequential write
>   required zones starting with the first zone.
> * RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
>   of the last logical block on the logical unit.
> 
> The current scsi_debug READ CAPACITY response does not comply with the above
> if there are one or more sequential write required zones. Hence this patch.
> 
> Cc: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
> Cc: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
> Fixes: 64e14ece0700 ("scsi: scsi_debug: Implement ZBC host-aware emulation")
> Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx>
> ---
>  drivers/scsi/scsi_debug.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
> index 5a8efc328fb5..c5f4af774078 100644
> --- a/drivers/scsi/scsi_debug.c
> +++ b/drivers/scsi/scsi_debug.c
> @@ -304,6 +304,7 @@ struct sdebug_dev_info {
>  	unsigned int nr_exp_open;
>  	unsigned int nr_closed;
>  	unsigned int max_open;
> +	unsigned int rc_basis:2;
>  	ktime_t create_ts;	/* time since bootup that this device was created */
>  	struct sdeb_zone_state *zstate;
>  };
> @@ -1901,6 +1902,8 @@ static int resp_readcap16(struct scsi_cmnd *scp,
>  
>  	arr[15] = sdebug_lowest_aligned & 0xff;
>  
> +	arr[12] |= devip->rc_basis << 4;
> +
>  	if (have_dif_prot) {
>  		arr[12] = (sdebug_dif - 1) << 1; /* P_TYPE */
>  		arr[12] |= 1; /* PROT_EN */
> @@ -5107,10 +5110,12 @@ static int sdebug_device_create_zones(struct sdebug_dev_info *devip)
>  			zsp->z_size =
>  				min_t(u64, devip->zsize, capacity - zstart);
>  		} else if ((zstart & (devip->zsize - 1)) == 0) {
> -			if (devip->zmodel == BLK_ZONED_HM)
> +			if (devip->zmodel == BLK_ZONED_HM) {
>  				zsp->z_type = ZBC_ZTYPE_SWR;
> -			else
> +				devip->rc_basis = 1;
> +			} else {
>  				zsp->z_type = ZBC_ZTYPE_SWP;
> +			}
>  			zsp->z_cond = ZC1_EMPTY;
>  			zsp->z_wp = zsp->z_start;
>  			zsp->z_size =

Looks good.

Reviewed-by: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>

-- 
Damien Le Moal
Western Digital Research



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux