From: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>
Add the PCI ID for (values in hex):
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec SmartHBA 2100-8i-o 9005 / 0285 / 9005 / 0659
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
drivers/scsi/smartpqi/smartpqi_init.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 27b83db3e3dc..99f9fc834a69 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9352,6 +9352,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x0608)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0659)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x0800)
