[PATCH V2 03/16] smartpqi: add PCI-IDs for ramaxel controllers

[Don Brace <don.brace@xxxxxxxxxxxxx>]

From: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx>

Add the following controllers (values in hex):

                               VID  / DID  / SVID / SDID
                               ---- / ---- / ---- / ----
Ramaxel FBGF-RAD PM8204        9005 / 028F / 1CC4 / 0101
Ramaxel FBGF-RAD PM8222        9005 / 028F / 1CC4 / 0201

Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Reviewed-by: Kevin Barnett <kevin.barnett@xxxxxxxxxxxxx>
Signed-off-by: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
 drivers/scsi/smartpqi/smartpqi_init.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 394583672b0d..b13233dbe46c 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9746,6 +9746,14 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1cf2, 0x0b45)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1cc4, 0x0101)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1cc4, 0x0201)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_ANY_ID, PCI_ANY_ID)