Andrew Vasquez wrote: > On Thu, 12 Jul 2007, Mike Anderson wrote: > >> Copying this mail to linux-scsi and Ccing Andrew Vasquez to possibly >> provide input on the Qlogic behavior. >> >> Chandra Seetharaman <sekharan@xxxxxxxxxx> wrote: >>> On Thu, 2007-07-12 at 18:35 -0700, Brian De Wolf wrote: >>>> Hello All, >>>> >>>> I'm not sure if this is the right place for this, but it seems to be the only >>>> mailing list related to dm, multipath, and rdac, as far as I can tell. I've >>>> been trying out the dm-mpath-rdac patch (both yesterday's and previous) with >>>> gentoo's unstable 2.6.22 kernel, on a Sun x4100 through a QLA2422 HBA (firmware >>>> ql2400_fw.bin.4.00.27) to an IBM DS4000. I am using a version of >>>> multipath-tools that I got with git a few days ago. >>>> >>>> I've got multipath working, it reports the hwhandler correctly ([hwhandler=1 >>>> rdac]), and the volume is mountable, etc. It also shows one link as active, the >>>> other as ghost. However, once the active link dies, the volume becomes read >>>> only, and both connections are listed as failed. Most importantly, something >>>> like this shows up in the logs: >>>> >>>> Jul 12 17:11:15 jimbo kernel: device-mapper: multipath rdac: queueing >>>> MODE_SELECT command on 8:32 >>> It does look like the rdac hardware handler is doing the right thing and >>> the qlogic is dying for some reason. >>> >>> I have tested this code in both RHEL5 and SLES10 environments (qla23xx) >>> and they work fine. Can you try in one of those and see if it is any >>> different. >>> >>> Just an FYI w.r.t multipath tools: please remove the patch >>> http://git.kernel.org/?p=linux/storage/multipath- >>> tools/.git;a=commit;h=e1e1a1bfb2cf76bfd1a49335e3deec5360fb09db from your >>> tree for the tools to calculate the path priorities properly. >>> >>> >>>> Jul 12 17:11:15 jimbo kernel: qla2xxx 0000:02:01.1: ISP System Error - mbx1=0h >>>> mbx2=8012h mbx3=8002h. >>>> Jul 12 17:11:15 jimbo kernel: qla2xxx 0000:02:01.1: Firmware has been previously >>>> dumped (ffffc2000171d000) -- ignoring request... >>>> Jul 12 17:11:16 jimbo kernel: qla2xxx 0000:02:01.1: Performing ISP error >>>> recovery - ha= ffff81007e85c530. > > Hmm yes, there's some real problems going on within the firmware which > we need to triage. From the snippet above, the driver was able to > capture a firmware-dump of a failure (not sure of the timing and how > it relates to the window in which you recognized a 'problem'), but > I'll need to to 'capture' the firmware trace and forward it along to > us to inspect. > > 1) download the following shell script: > > ftp://ftp.qlogic.com/outgoing/linux/beta/8.x/test/qla_dmp.sh > > 2) copy the script to the host (/tmp) which is experiencing the > problems. > > 3) reboot and load the driver with the ql2xextended_error_logging > module parameter set to 1. e.g.: > > $ insmod qla2xxx.ko ql2xextended_error_logging=1 > > 4) rerun your test and monitor the kernel-messages file for a message > similar to: > > Firmware dump saved to temp buffer (1/adcdabcd) > > 5) To retrieve the dump, go to a console and type the following: > > # cd /tmp/ > # ./qla_dmp.sh 1 > > The value passed to qla_dmp.sh should be the same as the first integer > in the 'saved to temp buffer' string (in this example, 1). If the > operation was successful, a message like to following should be > displayed: > > Firmware dumped to file fw_dump_1_20041217_023222.txt.gz > > Formward the > forward over the file. > > 6) forward over the /var/log/messages file of the driver load and > failure snippet. > > > Not sure which firmware version you are running, but an additional > datapoint which may be useful after you send the firmware-dump is to > download the latest 24xx firmware file from QLogic.com: > > ftp://ftp.qlogic.com/outgoing/linux/firmware/ql2400_fw.bin > > and retry the test. If you still see problems, and see a similar > 'Firmware dump saved...' messages. Follow the steps above again and > forward the same datapoints. > I have tried both the ql2400_fw.bin.4.00.18 and ql2400_fw.bin.4.00.27 firmwares and the HBA had the same error. The attached datapoints were done using ql2400_fw.bin.4.00.27. >>>> While this may be something for the maintainer of the qla2xxx module (I can't >>>> figure out where I'd send it, in that case...) I think it may be of interest >>>> that the dm_rdac module tries to push something over the HBA that causes it to >>>> bail completely and start from scratch (it starts init processes and loading >>>> firmware again). >>>> >>>> Not to say that I'm not interested in any help getting this working, that is. >>>> If you have any suggestions on how to get this working, I'd love to hear them. >>>> I'm also willing to guinea pig some testing if you need it (This box still has a >>>> bit before it will have to be put in use). I may use redhat to ensure that it's >>>> not just a broken HBA, but for the long run we would like it to join our gentoo >>>> environment. >>>> >>>> Thanks! >>>> Brian De Wolf >>>> >>>> PS- If the subject mislead you because you feel that this is just a qla2xxx >>>> problem, I'm sorry for wasting your time. > > Regards, > Andrew Vasquez > > -- > dm-devel mailing list > dm-devel@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/dm-devel
Attachment:
fw_dump_6_20070713_112706.txt.gz
Description: application/gzip
Jul 13 11:24:10 jimbo kernel: QLogic Fibre Channel HBA Driver Jul 13 11:24:10 jimbo kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 28 (level, low) -> IRQ 28 Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Found an ISP2422, irq 28, iobase 0xffffc20001428000 Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Configuring PCI space... Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Configure NVRAM parameters... Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Verifying loaded RISC code... Jul 13 11:24:10 jimbo kernel: scsi(5): **** Load RISC code **** Jul 13 11:24:10 jimbo kernel: scsi(5): Verifying Checksum of loaded RISC code. Jul 13 11:24:10 jimbo kernel: scsi(5): Checksum OK, start firmware. Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Allocated (64 KB) for EFT... Jul 13 11:24:10 jimbo kernel: qla2xxx 0000:02:01.0: Allocated (1413 KB) for firmware dump... Jul 13 11:24:10 jimbo kernel: scsi(5): Issue init firmware. Jul 13 11:24:10 jimbo kernel: DEBUG: detect hba 5 at address = ffff81007dd84530 Jul 13 11:24:10 jimbo kernel: scsi5 : qla2xxx Jul 13 11:24:12 jimbo kernel: scsi(5): qla2x00_loop_resync() Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.0: Jul 13 11:24:15 jimbo kernel: QLogic Fibre Channel HBA Driver: 8.01.07-k7-debug Jul 13 11:24:15 jimbo kernel: QLogic QLA2462 - Sun PCI-X 2.0 to 4Gb FC, Dual Channel Jul 13 11:24:15 jimbo kernel: ISP2422: PCI-X Mode 1 (100 MHz) @ 0000:02:01.0 hdma+, host#=5, fw=4.00.27 [IP] Jul 13 11:24:15 jimbo kernel: ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 29 (level, low) -> IRQ 29 Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Found an ISP2422, irq 29, iobase 0xffffc2000142a000 Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Configuring PCI space... Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Configure NVRAM parameters... Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Verifying loaded RISC code... Jul 13 11:24:15 jimbo kernel: scsi(6): **** Load RISC code **** Jul 13 11:24:15 jimbo kernel: scsi(6): Verifying Checksum of loaded RISC code. Jul 13 11:24:15 jimbo kernel: scsi(6): Checksum OK, start firmware. Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Allocated (64 KB) for EFT... Jul 13 11:24:15 jimbo kernel: qla2xxx 0000:02:01.1: Allocated (1413 KB) for firmware dump... Jul 13 11:24:15 jimbo kernel: scsi(6): Issue init firmware. Jul 13 11:24:15 jimbo kernel: DEBUG: detect hba 6 at address = ffff81007de68530 Jul 13 11:24:15 jimbo kernel: scsi6 : qla2xxx Jul 13 11:24:16 jimbo kernel: scsi(6): Asynchronous LIP RESET (f700). Jul 13 11:24:16 jimbo kernel: qla2xxx 0000:02:01.1: LIP reset occured (f700). Jul 13 11:24:16 jimbo kernel: scsi(6): LIP occured (f700). Jul 13 11:24:16 jimbo kernel: qla2xxx 0000:02:01.1: LIP occured (f700). Jul 13 11:24:16 jimbo kernel: scsi(6): Asynchronous LIP RESET (f7f7). Jul 13 11:24:16 jimbo kernel: qla2xxx 0000:02:01.1: LIP reset occured (f7f7). Jul 13 11:24:16 jimbo kernel: scsi(6): Asynchronous P2P MODE received. Jul 13 11:24:17 jimbo kernel: scsi(6): Asynchronous LOOP UP (4 Gbps). Jul 13 11:24:17 jimbo kernel: qla2xxx 0000:02:01.1: LOOP UP detected (4 Gbps). Jul 13 11:24:17 jimbo kernel: scsi(6): Asynchronous PORT UPDATE. Jul 13 11:24:17 jimbo kernel: scsi(6): Port database changed ffff 0006 0000. Jul 13 11:24:17 jimbo kernel: scsi(6): qla2x00_reset_marker() Jul 13 11:24:17 jimbo kernel: scsi(6): qla2x00_loop_resync() Jul 13 11:24:17 jimbo kernel: scsi(6): F/W Ready - OK Jul 13 11:24:17 jimbo kernel: scsi(6): fw_state=3 curr time=100032111. Jul 13 11:24:17 jimbo kernel: scsi(6): Configure loop -- dpc flags =0x40800e0 Jul 13 11:24:17 jimbo kernel: scsi(6): RSCN queue entry[0] = [00/000000]. Jul 13 11:24:17 jimbo kernel: scsi(6): device_resync: rscn overflow. Jul 13 11:24:17 jimbo kernel: scsi(6): RFT_ID exiting normally. Jul 13 11:24:17 jimbo kernel: scsi(6): RFF_ID exiting normally. Jul 13 11:24:17 jimbo kernel: scsi(6): RNN_ID exiting normally. Jul 13 11:24:17 jimbo kernel: scsi(6): RSNN_NN exiting normally. Jul 13 11:24:17 jimbo kernel: scsi(6): GID_PT entry - nn 200600a0b8119910 pn 202700a0b8119910 portid=050100. Jul 13 11:24:17 jimbo kernel: scsi(6): GID_PT entry - nn 200100e08bb191cd pn 210100e08bb191cd portid=050200. Jul 13 11:24:17 jimbo kernel: scsi(6): GPSC failed, rejected request: Jul 13 11:24:17 jimbo kernel: 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh Jul 13 11:24:17 jimbo kernel: -------------------------------------------------------------- Jul 13 11:24:17 jimbo kernel: 01 00 00 00 fa 01 00 00 80 01 00 00 00 0b 00 00 Jul 13 11:24:17 jimbo kernel: scsi(6): GPSC failed, rejected request: Jul 13 11:24:17 jimbo kernel: 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh Jul 13 11:24:17 jimbo kernel: -------------------------------------------------------------- Jul 13 11:24:17 jimbo kernel: 01 00 00 00 fa 01 00 00 80 01 00 00 00 0b 00 00 Jul 13 11:24:17 jimbo kernel: scsi(6): device wrap (050200) Jul 13 11:24:17 jimbo kernel: scsi(6): Trying Fabric Login w/loop id 0x0081 for port 050100. Jul 13 11:24:17 jimbo kernel: scsi(6): 202700a0b8119910 -- unsupported FM port operating speed (0000). Jul 13 11:24:17 jimbo kernel: scsi(6): LOOP READY Jul 13 11:24:17 jimbo kernel: scsi(6): qla2x00_loop_resync - end Jul 13 11:24:17 jimbo kernel: qla2xxx 0000:02:01.1: scsi(6:0:0:0): Queue depth adjusted-up to 4. Jul 13 11:24:17 jimbo kernel: scsi 6:0:0:0: Direct-Access IBM 1815 FAStT 0914 PQ: 0 ANSI: 3 Jul 13 11:24:17 jimbo kernel: qla2xxx 0000:02:01.1: Jul 13 11:24:17 jimbo kernel: QLogic Fibre Channel HBA Driver: 8.01.07-k7-debug Jul 13 11:24:17 jimbo kernel: QLogic QLA2462 - Sun PCI-X 2.0 to 4Gb FC, Dual Channel Jul 13 11:24:17 jimbo kernel: ISP2422: PCI-X Mode 1 (100 MHz) @ 0000:02:01.1 hdma+, host#=6, fw=4.00.27 [IP] Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] 6291456 512-byte hardware sectors (3221 MB) Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Write Protect is off Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Mode Sense: 77 00 10 08 Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] 6291456 512-byte hardware sectors (3221 MB) Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Write Protect is off Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Mode Sense: 77 00 10 08 Jul 13 11:24:17 jimbo kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA Jul 13 11:24:17 jimbo kernel: sdc:scsi(6): Asynchronous PORT UPDATE ignored 0000/0004/0600. Jul 13 11:24:17 jimbo kernel: scsi(6): Asynchronous PORT UPDATE ignored 0000/0007/0b00. Jul 13 11:24:17 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:17 jimbo kernel: Buffer I/O error on device sdc, logical block 0 Jul 13 11:24:18 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:18 jimbo kernel: Buffer I/O error on device sdc, logical block 0 Jul 13 11:24:18 jimbo kernel: unable to read partition table Jul 13 11:24:18 jimbo kernel: sd 6:0:0:0: [sdc] Attached SCSI disk Jul 13 11:24:18 jimbo kernel: scsi 6:0:0:31: Direct-Access IBM Universal Xport 0914 PQ: 0 ANSI: 3 Jul 13 11:24:18 jimbo kernel: end_request: I/O error, dev sdc, sector 6291328 Jul 13 11:24:18 jimbo kernel: Buffer I/O error on device sdc, logical block 786416 Jul 13 11:24:19 jimbo kernel: end_request: I/O error, dev sdc, sector 6291328 Jul 13 11:24:19 jimbo kernel: Buffer I/O error on device sdc, logical block 786416 Jul 13 11:24:19 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:19 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:20 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:20 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:20 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:20 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:21 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:21 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:21 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:21 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:22 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:22 jimbo kernel: Buffer I/O error on device sdc, logical block 786431 Jul 13 11:24:22 jimbo kernel: end_request: I/O error, dev sdc, sector 6291392 Jul 13 11:24:22 jimbo kernel: Buffer I/O error on device sdc, logical block 786424 Jul 13 11:24:23 jimbo kernel: end_request: I/O error, dev sdc, sector 6291440 Jul 13 11:24:23 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:24 jimbo kernel: end_request: I/O error, dev sdc, sector 6291448 Jul 13 11:24:24 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:25 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:26 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:26 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:27 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:27 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:27 jimbo kernel: printk: 8 messages suppressed. Jul 13 11:24:27 jimbo kernel: Buffer I/O error on device sdc, logical block 0 Jul 13 11:24:28 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:28 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:29 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:29 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:30 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:30 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:31 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:31 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:32 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:32 jimbo kernel: qla2xxx 0000:02:01.0: Cable is unplugged... Jul 13 11:24:32 jimbo kernel: scsi(5): fw_state=4 curr time=100033044. Jul 13 11:24:32 jimbo kernel: scsi(5): Firmware ready **** FAILED ****. Jul 13 11:24:32 jimbo kernel: qla2x00_loop_resync(): **** FAILED **** Jul 13 11:24:32 jimbo kernel: scsi(5): qla2x00_loop_resync - end Jul 13 11:24:32 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:32 jimbo kernel: printk: 9 messages suppressed. Jul 13 11:24:32 jimbo kernel: Buffer I/O error on device sdc, logical block 0 Jul 13 11:24:33 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:34 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:34 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:35 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:35 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:36 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:36 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:37 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:37 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:37 jimbo kernel: printk: 8 messages suppressed. Jul 13 11:24:37 jimbo kernel: Buffer I/O error on device sdc, logical block 0 Jul 13 11:24:38 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:38 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:39 jimbo kernel: end_request: I/O error, dev sdc, sector 0 Jul 13 11:24:39 jimbo kernel: device-mapper: multipath rdac: using RDAC command with timeout 15000 Jul 13 11:24:39 jimbo kernel: device-mapper: multipath rdac: queueing MODE_SELECT command on 8:32 Jul 13 11:24:41 jimbo kernel: qla2xxx 0000:02:01.1: ISP System Error - mbx1=0h mbx2=8012h mbx3=8002h. Jul 13 11:24:41 jimbo kernel: qla2xxx 0000:02:01.1: Firmware dump saved to temp buffer (6/ffffc2000191f000). Jul 13 11:24:41 jimbo kernel: scsi(5): Loop Down - aborting the queues before time expire Jul 13 11:24:41 jimbo kernel: scsi(6): dpc: sched qla2x00_abort_isp ha = ffff81007de68530 Jul 13 11:24:41 jimbo kernel: qla2xxx 0000:02:01.1: Performing ISP error recovery - ha= ffff81007de68530. Jul 13 11:24:41 jimbo kernel: device-mapper: multipath: Failing path 8:32. Jul 13 11:24:41 jimbo kernel: scsi(6): **** Load RISC code **** Jul 13 11:24:41 jimbo kernel: scsi(6): Verifying Checksum of loaded RISC code. Jul 13 11:24:41 jimbo kernel: scsi(6): Checksum OK, start firmware. Jul 13 11:24:41 jimbo kernel: scsi(6): Issue init firmware. Jul 13 11:24:42 jimbo kernel: scsi(6): Asynchronous LIP RESET (f700). Jul 13 11:24:42 jimbo kernel: qla2xxx 0000:02:01.1: LIP reset occured (f700). Jul 13 11:24:42 jimbo kernel: scsi(6): LIP occured (f700). Jul 13 11:24:42 jimbo kernel: qla2xxx 0000:02:01.1: LIP occured (f700). Jul 13 11:24:42 jimbo kernel: scsi(6): Asynchronous LIP RESET (f7f7). Jul 13 11:24:42 jimbo kernel: qla2xxx 0000:02:01.1: LIP reset occured (f7f7). Jul 13 11:24:42 jimbo kernel: scsi(6): Asynchronous P2P MODE received. Jul 13 11:24:42 jimbo kernel: scsi(6): fcport-0 - port retry count: 0 remaining Jul 13 11:24:43 jimbo kernel: scsi(6): Asynchronous LOOP UP (4 Gbps). Jul 13 11:24:43 jimbo kernel: qla2xxx 0000:02:01.1: LOOP UP detected (4 Gbps). Jul 13 11:24:43 jimbo kernel: scsi(6): Asynchronous PORT UPDATE. Jul 13 11:24:43 jimbo kernel: scsi(6): Port database changed ffff 0006 0000. Jul 13 11:24:43 jimbo kernel: scsi(6): Asynchronous PORT UPDATE ignored 0000/0004/0600. Jul 13 11:24:43 jimbo kernel: scsi(6): Asynchronous PORT UPDATE ignored 0000/0007/0b00. Jul 13 11:24:43 jimbo kernel: scsi(6): F/W Ready - OK Jul 13 11:24:43 jimbo kernel: scsi(6): fw_state=3 curr time=100033b09. Jul 13 11:24:43 jimbo kernel: qla2x00_restart_isp(): Start configure loop, status = 0 Jul 13 11:24:43 jimbo kernel: scsi(6): Configure loop -- dpc flags =0x4080049 Jul 13 11:24:43 jimbo kernel: scsi(6): RSCN queue entry[0] = [00/000000]. Jul 13 11:24:43 jimbo kernel: scsi(6): device_resync: rscn overflow. Jul 13 11:24:43 jimbo kernel: scsi(6): RFT_ID exiting normally. Jul 13 11:24:43 jimbo kernel: scsi(6): RFF_ID exiting normally. Jul 13 11:24:43 jimbo kernel: scsi(6): RNN_ID exiting normally. Jul 13 11:24:43 jimbo kernel: scsi(6): RSNN_NN exiting normally. Jul 13 11:24:43 jimbo kernel: scsi(6): GID_PT entry - nn 200600a0b8119910 pn 202700a0b8119910 portid=050100. Jul 13 11:24:43 jimbo kernel: scsi(6): GID_PT entry - nn 200100e08bb191cd pn 210100e08bb191cd portid=050200. Jul 13 11:24:43 jimbo kernel: scsi(6): GPSC failed, rejected request: Jul 13 11:24:43 jimbo kernel: 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh Jul 13 11:24:43 jimbo kernel: -------------------------------------------------------------- Jul 13 11:24:43 jimbo kernel: 01 00 00 00 fa 01 00 00 80 01 00 00 00 0b 00 00 Jul 13 11:24:43 jimbo kernel: scsi(6): GPSC failed, rejected request: Jul 13 11:24:43 jimbo kernel: 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh Fh Jul 13 11:24:43 jimbo kernel: -------------------------------------------------------------- Jul 13 11:24:43 jimbo kernel: 01 00 00 00 fa 01 00 00 80 01 00 00 00 0b 00 00 Jul 13 11:24:43 jimbo kernel: qla24xx_fabric_logout(6): failed to complete IOCB -- completion status (31) ioparam=a/0. Jul 13 11:24:43 jimbo kernel: scsi(6): device wrap (050200) Jul 13 11:24:43 jimbo kernel: scsi(6): Trying Fabric Login w/loop id 0x0081 for port 050100. Jul 13 11:24:44 jimbo kernel: scsi(6): 202700a0b8119910 -- unsupported FM port operating speed (0000). Jul 13 11:24:44 jimbo kernel: scsi(6): LOOP READY Jul 13 11:24:44 jimbo kernel: qla2x00_restart_isp(): Configure loop done, status = 0x0 Jul 13 11:24:44 jimbo kernel: qla2x00_abort_isp(6): exiting. Jul 13 11:24:44 jimbo kernel: scsi(6): dpc: qla2x00_abort_isp end
