> As we know, the ufs host controller is disabled and enabled in the
> ufshcd_hba_enable(). So, host controller registers are clear after sw reset.
>
> Once the host fails to link startup 3 times, all host's controller can be clear due
> to executing last ufshcd_hba_enable()(s/w reset).
> That's why we need to skip last sw reset to get valid host register values.
>
> Before
> (ufshcd_dme_link_startup() -> ufshcd_hba_enable() -> retries--) * 3 times.
>
> After
> (ufshcd_dme_link_startup() -> if retries is 0, break. -> ufshcd_hba_enable()
> -> retries--) * 3 times.
> In this case, ufshcd_print_host_state(), ufshcd_print_pwr_info(),
> ufshcd_print_evt_hist() are valid.
If you find it necessary to elaborate the commit log, why not do just that?
Also maybe make the title more indicative of what you want to achieve:
"skip last hci reset to get valid register values" or something.
Thanks,
Avri
>
> > -----Original Message-----
> > From: Seunghui Lee <sh043.lee@xxxxxxxxxxx>
> > Sent: Thursday, June 30, 2022 1:48 PM
> > To: alim.akhtar@xxxxxxxxxxx; avri.altman@xxxxxxx;
> bvanassche@xxxxxxx;
> > jejb@xxxxxxxxxxxxx; martin.petersen@xxxxxxxxxx; linux-
> scsi@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx
> > Cc: grant.jung@xxxxxxxxxxx; jt77.jang@xxxxxxxxxxx;
> > dh0421.hwang@xxxxxxxxxxx; junwoo80.lee@xxxxxxxxxxx;
> jangsub.yi@xxxxxxxxxxx;
> > cw9316.lee@xxxxxxxxxxx; sh8267.baek@xxxxxxxxxxx;
> wkon.kim@xxxxxxxxxxx;
> > Seunghui Lee <sh043.lee@xxxxxxxxxxx>
> > Subject: [PATCH] scsi: ufs: no sw reset after last linkstartup fail
> >
> > Host driver resets the host(ufshcd_hba_enable) after last linkstartup
> > command failed. All of the member or host dump after linkstartup fail are
> > reset value because of sw reset.
> >
> > Signed-off-by: Junwoo Lee <junwoo80.lee@xxxxxxxxxxx>
> > Signed-off-by: Seunghui Lee <sh043.lee@xxxxxxxxxxx>
> > ---
> > drivers/ufs/core/ufshcd.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index
> > 7c1d7bb9c579..2cdc14675443 100644
> > --- a/drivers/ufs/core/ufshcd.c
> > +++ b/drivers/ufs/core/ufshcd.c
> > @@ -4753,7 +4753,7 @@ static int ufshcd_link_startup(struct ufs_hba
> *hba)
> > * but we can't be sure if the link is up until link startup
> > * succeeds. So reset the local Uni-Pro and try again.
> > */
> > - if (ret && ufshcd_hba_enable(hba)) {
> > + if (ret && retries && ufshcd_hba_enable(hba)) {
> > ufshcd_update_evt_hist(hba,
> > UFS_EVT_LINK_STARTUP_FAIL,
> > (u32)ret);
> > --
> > 2.29.0
>
