RE: [PATCH v3 2/2] scsi: ufs: wb: Add Manual Flush sysfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> There is the following quirk to bypass "WB Manual Flush" in Write Booster.
> 
>         - UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
> 
> If this quirk is not set, there is no knob that can control "WB Manual Flush".
> 
> There are three flags that control Write Booster Feature.
>         1. WB ON/OFF
>         2. WB Hibern Flush ON/OFF
>         3. WB Flush ON/OFF
> 
> The sysfs that controls the WB was implemented. (1)
> 
> In the case of "Hibern Flush", it is always good to turn on.
> Control may not be required. (2)
> 
> Finally, "Manual flush" may be necessary because the Auto-Hibern8 is not
> supported in a specific environment.
> So the sysfs that controls this is necessary. (3)
> 
> Signed-off-by: Jinyoung Choi <j-young.choi@xxxxxxxxxxx>
Reviewed-by: Avri Altman <avri.altman@xxxxxxx>





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux