After issuing a lip, a specific target vendor does not ACC the FLOGI that
lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The
target then establishes the port IDs by sending a PLOGI. Lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001. The target then sends
a LOGO to the fabric DID. Lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps. The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.
Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port routine and just move the fabric
DID back to NPR.
Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 639f86635127..b86ff9fcdf0c 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -834,7 +834,8 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_nvmet_invalidate_host(phba, ndlp);
if (ndlp->nlp_DID == Fabric_DID) {
- if (vport->port_state <= LPFC_FDISC)
+ if (vport->port_state <= LPFC_FDISC ||
+ vport->fc_flag & FC_PT2PT)
goto out;
lpfc_linkdown_port(vport);
spin_lock_irq(shost->host_lock);
--
2.26.2
