SCSI EH host reset is the final callback in the escalation chain;
once we reach this we need to reset the controller.
As such it defeats the purpose to skip controller reset if no
I/Os are pending and the RAID device is to be reset; especially
after kexec there might be stale commands pending in firmware
for which we have no reference whatsoever.
So this patch splits off the check for pending I/O into a
'bus_reset' function, and leaves the actual controller reset
to the host reset.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Cc: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
Cc: Sathya Prakash Veerichetty <sathya.prakash@xxxxxxxxxxxx>
Cc: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
Cc: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx>
---
drivers/scsi/mpi3mr/mpi3mr_os.c | 57 +++++++++++++++++++++------------
1 file changed, 37 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index f7cd70a15ea6..31f05e9f5ee0 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -3337,20 +3337,45 @@ void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout)
* mpi3mr_eh_host_reset - Host reset error handling callback
* @scmd: SCSI command reference
*
- * Issue controller reset if the scmd is for a Physical Device,
- * if the scmd is for RAID volume, then wait for
- * MPI3MR_RAID_ERRREC_RESET_TIMEOUT and checke whether any
- * pending I/Os prior to issuing reset to the controller.
+ * Issue controller reset
*
* Return: SUCCESS of successful reset else FAILED
*/
static int mpi3mr_eh_host_reset(struct scsi_cmnd *scmd)
+{
+ struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
+ int retval = FAILED, ret;
+
+ ret = mpi3mr_soft_reset_handler(mrioc,
+ MPI3MR_RESET_FROM_EH_HOS, 1);
+ if (ret)
+ goto out;
+
+ retval = SUCCESS;
+out:
+ sdev_printk(KERN_INFO, scmd->device,
+ "Host reset is %s for scmd(%p)\n",
+ ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ return retval;
+}
+
+/**
+ * mpi3mr_eh_bus_reset - Bus reset error handling callback
+ * @scmd: SCSI command reference
+ *
+ * Checks whether pending I/Os are present for the RAID volume;
+ * if not there's no need to reset the adapter.
+ *
+ * Return: SUCCESS of successful reset else FAILED
+ */
+static int mpi3mr_eh_bus_reset(struct scsi_cmnd *scmd)
{
struct mpi3mr_ioc *mrioc = shost_priv(scmd->device->host);
struct mpi3mr_stgt_priv_data *stgt_priv_data;
struct mpi3mr_sdev_priv_data *sdev_priv_data;
u8 dev_type = MPI3_DEVICE_DEVFORM_VD;
- int retval = FAILED, ret;
+ int retval = FAILED;
sdev_priv_data = scmd->device->hostdata;
if (sdev_priv_data && sdev_priv_data->tgt_priv_data) {
@@ -3360,25 +3385,16 @@ static int mpi3mr_eh_host_reset(struct scsi_cmnd *scmd)
if (dev_type == MPI3_DEVICE_DEVFORM_VD) {
mpi3mr_wait_for_host_io(mrioc,
- MPI3MR_RAID_ERRREC_RESET_TIMEOUT);
- if (!mpi3mr_get_fw_pending_ios(mrioc)) {
+ MPI3MR_RAID_ERRREC_RESET_TIMEOUT);
+ if (!mpi3mr_get_fw_pending_ios(mrioc))
retval = SUCCESS;
- goto out;
- }
}
+ if (retval == FAILED)
+ mpi3mr_print_pending_host_io(mrioc);
- mpi3mr_print_pending_host_io(mrioc);
- ret = mpi3mr_soft_reset_handler(mrioc,
- MPI3MR_RESET_FROM_EH_HOS, 1);
- if (ret)
- goto out;
-
- retval = SUCCESS;
-out:
sdev_printk(KERN_INFO, scmd->device,
- "Host reset is %s for scmd(%p)\n",
- ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
-
+ "Bus reset is %s for scmd(%p)\n",
+ ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
return retval;
}
@@ -4094,6 +4110,7 @@ static struct scsi_host_template mpi3mr_driver_template = {
.change_queue_depth = mpi3mr_change_queue_depth,
.eh_device_reset_handler = mpi3mr_eh_dev_reset,
.eh_target_reset_handler = mpi3mr_eh_target_reset,
+ .eh_bus_reset_handler = mpi3mr_eh_bus_reset,
.eh_host_reset_handler = mpi3mr_eh_host_reset,
.bios_param = mpi3mr_bios_param,
.map_queues = mpi3mr_map_queues,
--
2.29.2
