[PATCH 20/24] sym53c8xx_2: split off bus reset from host reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current handler does both, bus reset and host reset.
So split them off into two distinct functions.

Signed-off-by: Hannes Reinecke <hare@xxxxxxxx>
Cc: Matthew Wilcox <willy@xxxxxxxxxxxxx>
---
 drivers/scsi/sym53c8xx_2/sym_glue.c | 107 +++++++++++++++++-----------
 1 file changed, 66 insertions(+), 41 deletions(-)

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 2e2852bd5860..9166af69bbb4 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -559,8 +559,6 @@ static void sym53c8xx_timer(struct timer_list *t)
  */
 #define SYM_EH_ABORT		0
 #define SYM_EH_DEVICE_RESET	1
-#define SYM_EH_BUS_RESET	2
-#define SYM_EH_HOST_RESET	3
 
 /*
  *  Generic method for our eh processing.
@@ -580,35 +578,11 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
 
 	scmd_printk(KERN_WARNING, cmd, "%s operation started\n", opname);
 
-	/* We may be in an error condition because the PCI bus
-	 * went down. In this case, we need to wait until the
-	 * PCI bus is reset, the card is reset, and only then
-	 * proceed with the scsi error recovery.  There's no
-	 * point in hurrying; take a leisurely wait.
+	/*
+	 * Escalate to host reset if the PCI bus went down
 	 */
-#define WAIT_FOR_PCI_RECOVERY	35
-	if (pci_channel_offline(pdev)) {
-		int finished_reset = 0;
-		init_completion(&eh_done);
-		spin_lock_irq(shost->host_lock);
-		/* Make sure we didn't race */
-		if (pci_channel_offline(pdev)) {
-			BUG_ON(sym_data->io_reset);
-			sym_data->io_reset = &eh_done;
-		} else {
-			finished_reset = 1;
-		}
-		spin_unlock_irq(shost->host_lock);
-		if (!finished_reset)
-			finished_reset = wait_for_completion_timeout
-						(sym_data->io_reset,
-						WAIT_FOR_PCI_RECOVERY*HZ);
-		spin_lock_irq(shost->host_lock);
-		sym_data->io_reset = NULL;
-		spin_unlock_irq(shost->host_lock);
-		if (!finished_reset)
-			return SCSI_FAILED;
-	}
+	if (pci_channel_offline(pdev))
+		return SCSI_FAILED;
 
 	spin_lock_irq(shost->host_lock);
 	/* This one is queued in some place -> to wait for completion */
@@ -629,15 +603,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
 	case SYM_EH_DEVICE_RESET:
 		sts = sym_reset_scsi_target(np, cmd->device->id);
 		break;
-	case SYM_EH_BUS_RESET:
-		sym_reset_scsi_bus(np, 1);
-		sts = 0;
-		break;
-	case SYM_EH_HOST_RESET:
-		sym_reset_scsi_bus(np, 0);
-		sym_start_up(shost, 1);
-		sts = 0;
-		break;
 	default:
 		break;
 	}
@@ -679,12 +644,72 @@ static int sym53c8xx_eh_device_reset_handler(struct scsi_cmnd *cmd)
 
 static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
 {
-	return sym_eh_handler(SYM_EH_BUS_RESET, "BUS RESET", cmd);
+	struct Scsi_Host *shost = cmd->device->host;
+	struct sym_data *sym_data = shost_priv(shost);
+	struct pci_dev *pdev = sym_data->pdev;
+	struct sym_hcb *np = sym_data->ncb;
+
+	scmd_printk(KERN_WARNING, cmd, "BUS RESET operation started\n");
+
+	/*
+	 * Escalate to host reset if the PCI bus went down
+	 */
+	if (pci_channel_offline(pdev))
+		return SCSI_FAILED;
+
+	spin_lock_irq(shost->host_lock);
+	sym_reset_scsi_bus(np, 1);
+	spin_unlock_irq(shost->host_lock);
+
+	dev_warn(&cmd->device->sdev_gendev, "BUS RESET operation complete.\n");
+	return SCSI_SUCCESS;
 }
 
 static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
 {
-	return sym_eh_handler(SYM_EH_HOST_RESET, "HOST RESET", cmd);
+	struct Scsi_Host *shost = cmd->device->host;
+	struct sym_data *sym_data = shost_priv(shost);
+	struct pci_dev *pdev = sym_data->pdev;
+	struct sym_hcb *np = sym_data->ncb;
+	struct completion eh_done;
+	int finished_reset = 1;
+
+	shost_printk(KERN_WARNING, shost, "HOST RESET operation started\n");
+
+	/* We may be in an error condition because the PCI bus
+	 * went down. In this case, we need to wait until the
+	 * PCI bus is reset, the card is reset, and only then
+	 * proceed with the scsi error recovery.  There's no
+	 * point in hurrying; take a leisurely wait.
+	 */
+#define WAIT_FOR_PCI_RECOVERY	35
+	if (pci_channel_offline(pdev)) {
+		init_completion(&eh_done);
+		spin_lock_irq(shost->host_lock);
+		/* Make sure we didn't race */
+		if (pci_channel_offline(pdev)) {
+			BUG_ON(sym_data->io_reset);
+			sym_data->io_reset = &eh_done;
+			finished_reset = 0;
+		}
+		spin_unlock_irq(shost->host_lock);
+		if (!finished_reset)
+			finished_reset = wait_for_completion_timeout
+						(sym_data->io_reset,
+						WAIT_FOR_PCI_RECOVERY*HZ);
+		spin_lock_irq(shost->host_lock);
+		sym_data->io_reset = NULL;
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	if (finished_reset) {
+		sym_reset_scsi_bus(np, 0);
+		sym_start_up(shost, 1);
+	}
+
+	shost_printk(KERN_WARNING, shost, "HOST RESET operation %s.\n",
+			finished_reset==1 ? "complete" : "failed");
+	return finished_reset ? SCSI_SUCCESS : SCSI_FAILED;
 }
 
 /*
-- 
2.29.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux