Hi Yohan and Bean,
I have propose a patch to remove ufshpb_issue_umap_all_req as we also
consider this a redundant operation.
Please refer to topic "[PATCH 1/1] scsi: ufs: remove redundant HPB
unmap". Feel free to leave comments there. Thanks~
Po-Wen
On Tue, 2021-11-23 at 05:19 +0000, 정요한(JOUNG YOHAN) Mobile SE wrote:
> > it's for "Inactivating all HPB regions" after reboot
> >
> > scsi_add_lun()...>ufshpb_issue_umap_all_req(hpb);
> >
> > if it is a cold reboot on both host side and UFS device side, it is
> > not
> > necessary to issue this write buffer.
>
> According to you, is ufshpb_issue_umap_all_req used only for host
> reset?
> During boottime, the problem is that the hpb is set to the last LUN,
> write buffer command is sent before sd_probe completes.
> so, instead of performing unmap, UAC is returned.
> If ufshpb_issue_umap_all_req is not needed in cold boot, it seems
> necessary to move it to an appropriate location or remove
> >
> >
> > On Fri, 2021-11-19 at 02:31 +0000, 정요한(JOUNG YOHAN) Mobile SE
> > wrote:
> > > Hi daejun
> > >
> > > Please check ufshpb init flow.
> > > sending write buffer(0x03) seems spec violation (JESD220 Commands
> > > for
> > > exceptional behavior on UAC, SAM 5r05) before UAC clear
> > > (sd_probe).
> > > Anyway hpb reset query(ufshpb_check_hpb_reset_query) seems
> > > sufficient.
> > > Why do we need to send write buffer?
> > >
> > > void ufshpb_init_hpb_lu(struct ufs_hba *hba, struct scsi_device
> > > *sdev)
> > > {
> > > out:
> > > /* All LUs are initialized */
> > > if (atomic_dec_and_test(&hba->ufshpb_dev.slave_conf_cnt))
> > > There seems to be a problem with this logic.
> > > If hpb is set on the last LUN, write buffer command is sent
> > > before
> > > sd_probe completes.
> > > ufshpb_hpb_lu_prepared(hba);
> > > }
> > >
> > > static void ufshpb_hpb_lu_prepared(struct ufs_hba *hba) {
> > >
> > > init_success = !ufshpb_check_hpb_reset_query(hba);
> > >
> > > shost_for_each_device(sdev, hba->host) {
> > > hpb = ufshpb_get_hpb_data(sdev);
> > > if (!hpb)
> > > continue;
> > >
> > > if (init_success) {
> > > ufshpb_set_state(hpb, HPB_PRESENT);
> > > if ((hpb->lu_pinned_end - hpb->lu_pinned_start) > 0)
> > > queue_work(ufshpb_wq, &hpb->map_work);
> > > if (!hpb->is_hcm)
> > > ufshpb_issue_umap_all_req(hpb);
> > > This seems unnecessary.
> > >
> > > } else {
> > >
> > > Thanks
> > > yohan
>
>
