Re: [RFC PATCH 3/4] arm64: dts: qcom: sdm845: control RPMHPD performance states with UFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 03 Apr 17:02 PDT 2022, Dmitry Baryshkov wrote:

> On 01/04/2022 17:58, Krzysztof Kozlowski wrote:
> > UFS, when scaling gears, should choose appropriate performance state of
> > RPMHPD power domain controller.  Since UFS belongs to UFS_PHY_GDSC power
> > domain, add necessary parent power domain to GCC.
> 
> This will cause all gcc GDSCs to be rooted in the CX. Are we sure that this
> is an expected (and correct) change?
> 

Per the last part of Rajendra's reply in [1], this should be fine.
Naturally we might have to come up with some way to bind gdscs to one of
multiple power-domains if that changes.

[1] https://lore.kernel.org/all/5e572c50-d6fe-5a21-d09f-f11a072538c5@xxxxxxxxxxxxxx/

Regards,
Bjorn

> > 
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/sdm845.dtsi | 17 ++++++++++++++++-
> >   1 file changed, 16 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index b31bf62e8680..c999b41c2605 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -1078,6 +1078,7 @@ gcc: clock-controller@100000 {
> >   			#clock-cells = <1>;
> >   			#reset-cells = <1>;
> >   			#power-domain-cells = <1>;
> > +			power-domains = <&rpmhpd SDM845_CX>;
> >   		};
> >   		qfprom@784000 {
> > @@ -2336,8 +2337,22 @@ ufs_mem_hc: ufshc@1d84000 {
> >   				<0 0>,
> >   				<0 0>,
> >   				<0 300000000>;
> > -
> > +			operating-points-v2 = <&ufs_opp_table>;
> >   			status = "disabled";
> > +
> > +			ufs_opp_table: opp-table {
> > +				compatible = "operating-points-v2";
> > +
> > +				opp-50000000 {
> > +					opp-hz = /bits/ 64 <50000000>;
> > +					required-opps = <&rpmhpd_opp_svs>;
> > +				};
> > +
> > +				opp-200000000 {
> > +					opp-hz = /bits/ 64 <200000000>;
> > +					required-opps = <&rpmhpd_opp_nom>;
> > +				};
> > +			};
> >   		};
> >   		ufs_mem_phy: phy@1d87000 {
> 
> 
> -- 
> With best wishes
> Dmitry



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux