[PATCH 02/13] qla2xxx: Fix disk failure to rediscover

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

User experience some of the LUN failed to rediscovered after
long cable pull test. The issue is triggered by a race
condition between driver setting session online state vs upper layer/UL
starting the LUN scan process at the same time. Current code
set the online state after notifying upper layer the session is
available. In this case, UL was faster on the trigger to start
the LUN scan process before driver could set the session in
online state. LUN scan ends up with failure due to the session
online check was failing.

Set the online state before reporting to UL
of the availability of the session.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_init.c | 5 +++--
 drivers/scsi/qla2xxx/qla_nvme.c | 5 +++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 835ed4179887..6ffe44b805b6 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5758,6 +5758,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t *vha, fc_port_t *fcport)
 	if (atomic_read(&fcport->state) == FCS_ONLINE)
 		return;
 
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5858,6 +5860,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		qla2x00_reg_remote_port(vha, fcport);
 		break;
 	case MODE_TARGET:
+		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 		if (!vha->vha_tgt.qla_tgt->tgt_stop &&
 			!vha->vha_tgt.qla_tgt->tgt_stopped)
 			qlt_fc_port_added(vha, fcport);
@@ -5875,8 +5878,6 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	if (NVME_TARGET(vha->hw, fcport))
 		qla_nvme_register_remote(vha, fcport);
 
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
 		if (fcport->id_changed) {
 			fcport->id_changed = 0;
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c
index 718c761ff5f8..5723082d94d6 100644
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -37,6 +37,11 @@ int qla_nvme_register_remote(struct scsi_qla_host *vha, struct fc_port *fcport)
 		(fcport->nvme_flag & NVME_FLAG_REGISTERED))
 		return 0;
 
+	if (atomic_read(&fcport->state) == FCS_ONLINE)
+		return 0;
+
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
 
 	memset(&req, 0, sizeof(struct nvme_fc_port_info));
-- 
2.19.0.rc0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux