[PATCH 1/5] lpfc: kill lpfc_bus_reset_handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



lpfc_bus_reset_handler is really just a loop calling
lpfc_target_reset_handler() over all targets, which is what
the error handler will be doing anyway.

Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
Reviewed-by: James Smart <jsmart2021@xxxxxxxxx>
Cc: James Smart <james.smart@xxxxxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_scsi.c | 91 -----------------------------------
 1 file changed, 91 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 5a3da38a9067..a061b4ed4b00 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6528,95 +6528,6 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
 	return status;
 }
 
-/**
- * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
- * @cmnd: Pointer to scsi_cmnd data structure.
- *
- * This routine does target reset to all targets on @cmnd->device->host.
- * This emulates Parallel SCSI Bus Reset Semantics.
- *
- * Return code :
- *  0x2003 - Error
- *  0x2002 - Success
- **/
-static int
-lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
-{
-	struct Scsi_Host  *shost = cmnd->device->host;
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_nodelist *ndlp = NULL;
-	struct lpfc_scsi_event_header scsi_event;
-	int match;
-	int ret = SUCCESS, status, i;
-	u32 logit = LOG_FCP;
-
-	scsi_event.event_type = FC_REG_SCSI_EVENT;
-	scsi_event.subcategory = LPFC_EVENT_BUSRESET;
-	scsi_event.lun = 0;
-	memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
-	memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
-
-	fc_host_post_vendor_event(shost, fc_get_event_number(),
-		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
-
-	status = fc_block_scsi_eh(cmnd);
-	if (status != 0 && status != SUCCESS)
-		return status;
-
-	/*
-	 * Since the driver manages a single bus device, reset all
-	 * targets known to the driver.  Should any target reset
-	 * fail, this routine returns failure to the midlayer.
-	 */
-	for (i = 0; i < LPFC_MAX_TARGET; i++) {
-		/* Search for mapped node by target ID */
-		match = 0;
-		spin_lock_irq(shost->host_lock);
-		list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
-
-			if (vport->phba->cfg_fcp2_no_tgt_reset &&
-			    (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE))
-				continue;
-			if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
-			    ndlp->nlp_sid == i &&
-			    ndlp->rport &&
-			    ndlp->nlp_type & NLP_FCP_TARGET) {
-				match = 1;
-				break;
-			}
-		}
-		spin_unlock_irq(shost->host_lock);
-		if (!match)
-			continue;
-
-		status = lpfc_send_taskmgmt(vport, cmnd,
-					i, 0, FCP_TARGET_RESET);
-
-		if (status != SUCCESS) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
-					 "0700 Bus Reset on target %d failed\n",
-					 i);
-			ret = FAILED;
-		}
-	}
-	/*
-	 * We have to clean up i/o as : they may be orphaned by the TMFs
-	 * above; or if any of the TMFs failed, they may be in an
-	 * indeterminate state.
-	 * We will report success if all the i/o aborts successfully.
-	 */
-
-	status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
-	if (status != SUCCESS)
-		ret = FAILED;
-	if (ret == FAILED)
-		logit =  LOG_TRACE_EVENT;
-
-	lpfc_printf_vlog(vport, KERN_ERR, logit,
-			 "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
-	return ret;
-}
-
 /**
  * lpfc_host_reset_handler - scsi_host_template eh_host_reset_handler entry pt
  * @cmnd: Pointer to scsi_cmnd data structure.
@@ -7203,7 +7114,6 @@ struct scsi_host_template lpfc_template_nvme = {
 	.eh_abort_handler	= lpfc_no_handler,
 	.eh_device_reset_handler = lpfc_no_handler,
 	.eh_target_reset_handler = lpfc_no_handler,
-	.eh_bus_reset_handler	= lpfc_no_handler,
 	.eh_host_reset_handler  = lpfc_no_handler,
 	.slave_alloc		= lpfc_no_slave,
 	.slave_configure	= lpfc_no_slave,
@@ -7228,7 +7138,6 @@ struct scsi_host_template lpfc_template = {
 	.eh_abort_handler	= lpfc_abort_handler,
 	.eh_device_reset_handler = lpfc_device_reset_handler,
 	.eh_target_reset_handler = lpfc_target_reset_handler,
-	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
 	.eh_host_reset_handler  = lpfc_host_reset_handler,
 	.slave_alloc		= lpfc_slave_alloc,
 	.slave_configure	= lpfc_slave_configure,
-- 
2.29.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux