[PATCH 08/17] lpfc: SLI path split: refactor LS_RJT paths

[James Smart <jsmart2021@xxxxxxxxx>]

This patch refactors the LS_RJT paths to use SLI-4 as the primary
interface.

Changes include:
- conversion away from using sli-3 iocb structures to set/access fields
  in common routines. Use the new generic get/set routines that were added.
  This move changes code from indirect structure references to using
  local variables with the generic routines.
- refactor routines when setting non-generic fields, to have both
  both sli3 and sli4 specific sections. This replaces the set-as-sli3
  then translate to sli4 behavior of the past.

Co-developed-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: Justin Tee <justin.tee@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_els.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 04aac285a677..e28d970d2c6a 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5743,6 +5743,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 	struct lpfc_hba  *phba = vport->phba;
 	IOCB_t *icmd;
 	IOCB_t *oldcmd;
+	union lpfc_wqe128 *wqe;
 	struct lpfc_iocbq *elsiocb;
 	uint8_t *pcmd;
 	uint16_t cmdsize;
@@ -5753,10 +5754,19 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 	if (!elsiocb)
 		return 1;
 
-	icmd = &elsiocb->iocb;
-	oldcmd = &oldiocb->iocb;
-	icmd->ulpContext = oldcmd->ulpContext;	/* Xri / rx_id */
-	icmd->unsli3.rcvsli3.ox_id = oldcmd->unsli3.rcvsli3.ox_id;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		wqe = &elsiocb->wqe;
+		bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
+		       get_job_ulpcontext(phba, oldiocb)); /* Xri / rx_id */
+		bf_set(wqe_rcvoxid, &wqe->xmit_els_rsp.wqe_com,
+		       get_job_rcvoxid(phba, oldiocb));
+	} else {
+		icmd = &elsiocb->iocb;
+		oldcmd = &oldiocb->iocb;
+		icmd->ulpContext = oldcmd->ulpContext; /* Xri / rx_id */
+		icmd->unsli3.rcvsli3.ox_id = oldcmd->unsli3.rcvsli3.ox_id;
+	}
+
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 
 	*((uint32_t *) (pcmd)) = ELS_CMD_LS_RJT;
@@ -5772,7 +5782,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
 			 "xri x%x, did x%x, nlp_flag x%x, nlp_state x%x, "
 			 "rpi x%x\n",
 			 rejectError, elsiocb->iotag,
-			 elsiocb->iocb.ulpContext, ndlp->nlp_DID,
+			 get_job_ulpcontext(phba, elsiocb), ndlp->nlp_DID,
 			 ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi);
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_RSP,
 		"Issue LS_RJT:    did:x%x flg:x%x err:x%x",
-- 
2.26.2