On Mon, 11 Jun 2007, Kristen Carlson Accardi wrote: > Setting Effect > ---------------------------------------------------------- > min_power ALPM is enabled, and link set to enter > lowest power state (SLUMBER) when idle > Hot plug not allowed. > > max_performance ALPM is disabled, Hot Plug is allowed > > medium_power ALPM is enabled, and link set to enter > second lowest power state (PARTIAL) when > idle. Hot plug not allowed. Just some food for thought: If you split it into a enable/disable (0/1) attribute, and a level attribute (some sort of integer scale, or "min", "medium", "max" if you must use strings. You could use four levels to mimic the PCI device power state, for example), it might make its usage more generic, and easier from userspace, as it decouples the need to turn it on/off from the need to know which level the user wants it set to when you turn it on. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html