[PATCH] lpfc: Reduce log messages see after successful firmware download

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Messages around fw download were incorrectly tagged as being related to
discovery trace events. Thus, fw download status ended up dumping the
trace log as well as the fw update message. As there were a couple of
log messages in this state, the trace log was dumped multiple times.

Resolved by converting from trace events to sli events.

Cut against 5.18/scsi-queue

Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_init.c | 2 +-
 drivers/scsi/lpfc/lpfc_sli.c  | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a56f01f659f8..558f7d2559c4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2104,7 +2104,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 		}
 		if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
 		    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"3143 Port Down: Firmware Update "
 					"Detected\n");
 			en_rn_msg = false;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1bc0db572d9e..430abebf99f1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13363,6 +13363,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 	uint32_t uerr_sta_hi, uerr_sta_lo;
 	uint32_t if_type, portsmphr;
 	struct lpfc_register portstat_reg;
+	u32 logmask;
 
 	/*
 	 * For now, use the SLI4 device internal unrecoverable error
@@ -13413,7 +13414,12 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
 			phba->work_status[1] =
 				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
-			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			logmask = LOG_TRACE_EVENT;
+			if (phba->work_status[0] ==
+				SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART)
+				logmask = LOG_SLI;
+			lpfc_printf_log(phba, KERN_ERR, logmask,
 					"2885 Port Status Event: "
 					"port status reg 0x%x, "
 					"port smphr reg 0x%x, "
-- 
2.26.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux