Hello James, I write to you since you appear as the maintainer for the SCSI subsystem of the 2.6.x kernel. This is a report for a, possible, bug or hardware error. I would be grateful if you can help me figure out if it's a bug or a hardware error. Best regards, ------ Report Information: Problem: "Access to SCSI hard drive stoped working" Full Decription: "I have a server running Linux Debian 4 full patched that stopped responding to logins today. It also showed an errors like: *Warning*: session_start() [function.session-start <https://mabidp.interservices.com.ar/event_viewer/function.session-start>]: open(/var/lib/php5/sess_08d15059b3565084c88a2493cccd29bd, O_RDWR) failed: Read-only file system (30) in */usr/local/MABSEM/event_viewer/alerts_session.inc.php* on line *5* when trying to access to the webserver. There were no way to access to the system, event the consoles did not responded after typing the username, so I needed to power off the system. Afterwards in the logs I found an error related to SCSI (the error continue to appear but the system is working fine). Could you please tell me what could be the cause of this error and if it is the cause of the system failure?" Keywords: SCSI access error RO filesystem Mother Gigabyte GA-7DPXDW+ Mem: 1Gb DDR266 REG ECC1024M SCSI Adapter: Adapter 29320A uname -a: Linux mabidpconsole 2.6.18-4-k7 #1 SMP Wed May 9 23:42:01 UTC 2007 i686 GNU/Linux Error Message (from dmesg): EXT3-fs: mounted filesystem with ordered data mode. scsi0: Transmission error detected LQISTAT1[0x8]:(LQICRCI_NLQ) LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISIGI[0xa0]:(P_MESGOUT) PERRDIAG[0x24]:(CRCERR|PREVPHASE) >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi0: Dumping Card State at program address 0x31 Mode 0x11 Card was paused INTSTAT[0x8]:(SCSIINT) SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x24]:(CURRFIFO_0|FIFO1FREE) SCSISIGI[0xb6]:(P_MESGOUT|REQI|BSYI|ATNI) SCSIPHASE[0x4]:(MSG_OUT_PHASE) SCSIBUS[0xf7] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x2]:(SPIORDY) SSTAT1[0x11]:(REQINIT|PHASEMIS) SSTAT2[0x20]:(NONPACKREQ) SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0xc0]:(LQIPHASE_OUTPKT|PACKETIZED) LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) SCB Count = 32 CMDS_PENDING = 1 LASTSCB 0xb CURRSCB 0xb NEXTSCB 0xff00 qinstart = 1271 qinfifonext = 1271 QINFIFO: WAITING_TID_QUEUES: Pending list: 11 FIFO_USE[0x1] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 16 27 29 15 25 17 23 3 10 9 8 13 24 14 2 30 5 1 20 19 26 7 18 0 6 28 31 21 4 22 12 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: Sequencer On QFreeze and Complete list: scsi0: FIFO0 Active, LONGJMP == 0x24c, SCB 0xb SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x8]:(HDMAEN) DFSTATUS[0xc8]:(HDONE|PKT_PRELOAD_AVAIL|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x30] SG_STATE[0x3]:(SEGS_AVAIL|LOADING_NEEDED) DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x46]:(DATAINFIFO|DLZERO|SHCNTNEGATIVE) SHADDR = 0x03f32c200, SHCNT = 0xfffe00 HADDR = 0x03f32c000, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x0] LQIN: 0x5 0x0 0x0 0xb 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x72 0x0 0x0 0x0 0x2 0x0 scsi0: LQISTATE = 0x2b, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 SIMODE0[0xc]:(ENOVERRUN|ENIOERR) CCSCBCTL[0x4]:(CCSCBDIR) scsi0: REG0 == 0x3, SINDEX = 0x130, DINDEX = 0x102 scsi0: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xfff1 CDB 0 14 0 80 10 c STACK: 0x1f 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> LQICRC_NLQ LQIRETRY for LQIPHASE_OUTPKT scsi0: Returning to Idle Loop scsi0: device overrun (status a) on 0:0:0 cat /proc/modules: xt_state 2560 46 - Live 0xf8b67000 xt_tcpudp 3456 52 - Live 0xf8b54000 ipt_LOG 6464 3 - Live 0xf8b80000 iptable_nat 7428 1 - Live 0xf8b7d000 ip_nat 17260 1 iptable_nat, Live 0xf8b77000 ip_conntrack 49504 3 xt_state,iptable_nat,ip_nat, Live 0xf8b87000 nfnetlink 7128 2 ip_nat,ip_conntrack, Live 0xf8b74000 iptable_filter 3392 1 - Live 0xf899c000 ip_tables 13476 2 iptable_nat,iptable_filter, Live 0xf8b6f000 x_tables 13636 5 xt_state,xt_tcpudp,ipt_LOG,iptable_nat,ip_tables, Live 0xf8b6a000 button 6928 0 - Live 0xf8b45000 ac 5508 0 - Live 0xf8b48000 battery 9924 0 - Live 0xf8b50000 ipv6 228064 24 - Live 0xf8ba9000 dm_snapshot 15904 0 - Live 0xf8b4b000 dm_mirror 19600 0 - Live 0xf89bf000 dm_mod 50776 2 dm_snapshot,dm_mirror, Live 0xf8b56000 loop 15496 0 - Live 0xf89c5000 amd_rng 3268 0 - Live 0xf8845000 psmouse 35336 0 - Live 0xf89cb000 i2c_amd756 6596 0 - Live 0xf8996000 amd76x_edac 4224 0 - Live 0xf8999000 shpchp 33312 0 - Live 0xf89ab000 pci_hotplug 29056 1 shpchp, Live 0xf89b6000 i2c_core 20096 1 i2c_amd756, Live 0xf89a5000 edac_mc 21008 1 amd76x_edac, Live 0xf899e000 serio_raw 6980 0 - Live 0xf8840000 amd_k7_agp 8908 1 - Live 0xf88f0000 agpgart 30216 1 amd_k7_agp, Live 0xf88d9000 evdev 9408 0 - Live 0xf88d5000 rtc 12788 0 - Live 0xf88d0000 pcspkr 3392 0 - Live 0xf8843000 ext3 120584 2 - Live 0xf8962000 jbd 52968 1 ext3, Live 0xf88e2000 mbcache 8644 1 ext3, Live 0xf8880000 sd_mod 19456 4 - Live 0xf8887000 3c59x 40808 0 - Live 0xf886b000 e100 32904 0 - Live 0xf8876000 ohci_hcd 18564 0 - Live 0xf8847000 mii 5696 2 3c59x,e100, Live 0xf883d000 usbcore 113412 2 ohci_hcd, Live 0xf88b3000 aic79xx 241748 3 - Live 0xf8901000 scsi_transport_spi 22656 1 aic79xx, Live 0xf8836000 scsi_mod 124872 3 sd_mod,aic79xx,scsi_transport_spi, Live 0xf8893000 amd74xx 13340 0 [permanent], Live 0xf8831000 generic 5764 0 [permanent], Live 0xf8802000 ide_core 110984 2 amd74xx,generic, Live 0xf884e000 thermal 13896 0 - Live 0xf882c000 processor 29128 1 thermal, Live 0xf8823000 fan 5124 0 - Live 0xf8805000 cat /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) MP 2600+ stepping : 0 cpu MHz : 2000.120 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts bogomips : 4004.21 processor : 1 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) MP stepping : 0 cpu MHz : 2000.120 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts bogomips : 4000.53 cat /proc/ioports /proc/iomem: 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 03c0-03df : vga+ 03f8-03ff : serial 0cf8-0cff : PCI conf1 5000-5003 : ACPI PM1a_EVT_BLK 5004-5005 : ACPI PM1a_CNT_BLK 5008-500b : ACPI PM_TMR 5020-5023 : ACPI GPE0_BLK 50e0-50ef : amd756_smbus c000-cfff : PCI Bus #02 c000-c0ff : 0000:02:04.0 c400-c47f : 0000:02:06.0 c800-c83f : 0000:02:07.0 c800-c83f : e100 e000-e0ff : 0000:00:09.0 e400-e4ff : 0000:00:09.0 e800-e803 : 0000:00:00.0 f000-f00f : 0000:00:07.1 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cbfff : Video ROM 000cc000-000d5bff : Adapter ROM 000f0000-000fffff : System ROM 00100000-3ffeffff : System RAM 00100000-00285675 : Kernel code 00285676-00316b53 : Kernel data 3fff0000-3fff2fff : ACPI Non-volatile Storage 3fff3000-3fffffff : ACPI Tables 50000000-500fffff : PCI Bus #02 50000000-5001ffff : 0000:02:04.0 50020000-5003ffff : 0000:02:06.0 50040000-5004ffff : 0000:02:07.0 50100000-5017ffff : 0000:00:09.0 f0000000-f7ffffff : 0000:00:00.0 f9000000-fbffffff : PCI Bus #02 f9000000-f9ffffff : 0000:02:04.0 fb000000-fb01ffff : 0000:02:07.0 fb000000-fb01ffff : e100 fb020000-fb020fff : 0000:02:00.0 fb020000-fb020fff : ohci_hcd fb021000-fb02107f : 0000:02:06.0 fb022000-fb022fff : 0000:02:07.0 fb022000-fb022fff : e100 fb023000-fb023fff : 0000:02:04.0 fc000000-fc001fff : 0000:00:09.0 fc000000-fc000fff : aic79xx fc002000-fc002fff : 0000:00:00.0 fec00000-ffffffff : reserved lspci -vvv: 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 20) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at fc002000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at e800 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate= 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: fff00000-000fffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 Region 4: I/O ports at f000 [size=16] 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 00:09.0 SCSI storage controller: Adaptec ASC-29320A U320 (rev 10) Subsystem: Adaptec Unknown device 0060 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 169 Region 0: I/O ports at e000 [disabled] [size=256] Region 1: Memory at fc000000 (64-bit, non-prefetchable) [size=8K] Region 3: I/O ports at e400 [disabled] [size=256] [virtual] Expansion ROM at 50100000 [disabled] [size=512K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [94] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=8 Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz- 00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f9000000-fbffffff Prefetchable memory behind bridge: 50000000-500fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07) (prog-if 10 [OHCI]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 177 Region 0: Memory at fb020000 (32-bit, non-prefetchable) [size=4K] 02:04.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 41) (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at fb023000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 50000000 [disabled] [size=128K] 02:06.0 Ethernet controller: 3Com Corporation 3cSOHO100-TX Hurricane (rev 30) Subsystem: 3Com Corporation 3cSOHO100-TX Hurricane Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 193 Region 0: I/O ports at c400 [size=128] Region 1: Memory at fb021000 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at 50020000 [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:07.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corporation EtherExpress PRO/100 Server Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 185 Region 0: Memory at fb022000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c800 [size=64] Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 50040000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- cat /proc/scsi/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: SEAGATE Model: ST373207LW Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 -- Federico Petronio fpetronio@xxxxxxxxxxxxx Linux User #129974 --- There are only 10 types of people in the world: Those who understand binary and those who don't. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
